Why is my Ipod Touch 4th Gen saying i have headphones in when i don't?
Last night I was using my Ipod and it worked fine without the headphones. When I woke up this morning it isn't working, when I turn the volume up it says i have headphones in but I don't. I have already tried the trick with taking out and putting in the headphones and i have reset it like 5 times now.
You may have something stuck inside the headphone jack, blow inside a few times and see if that works. If not, restore the iPod. If that does not work, then that will indicate a hardware problem and you will need to get it fixed by Apple.
Similar Messages
-
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
HT1975 why does my ipod touch 4th gen can't detect my location?
why does my ipod touch 4th gen can't detect my location? i thought it was because updating foursquare. i have erased and restored its settings, but i was able to use my foursquare before even after the restoration, but now it's not working even my location services is on. Though, it can detect location in other areas, but it cant detect my location at home when before it used to check-in using foursquare.
polajoyosa wrote:
i tried to log in using my sister's iphone with foursquare and my account was able to check in. so it's all in my ipod's?
No, the iPhone can determine location by GPS and cell tower locations neither of which the iPod can do. So the fact that it works on the iPhoe does not tell you anything. It could be that your router is not in Apple's database. In that case you will just have to wait until they add it. Try using a public wi-fi source to see if location works there. -
i have a ipod touch 4th gen and i have the wifi bars but when i try to search something it wont let me conect it says "Lightspeed systems - Wed acces" what could i do help please.! o.o
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Why dont the ipod touch 4th gen cant get the IOS7 software
why dont the ipod touch 4th gen cant get the IOS7 software update
Because it doesn't have enough RAM to use it.
(92457) -
I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?
If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem -
I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set.... -
i have got a ipod touch 4th gen and i have got minecraft pocket edition on it but i and getting a new ipod touch 4th gen and i would like to know how to get minecraft back on my new iPod touch with all my data on it??? please help
See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
My Ipod Touch 4th Gen is listed as offline, even when I am using it to track other devices. Restarting has no effect.
Try going to Settings>iCloud, turn Find My iPod off, then after a minute or so, turn it back on.
-
Why Did My iPod Touch 4th Gen Stop Sync Entourage?
I just noticed that my items from Entourage 2008 are no longer syncing - Contacts, Calendar, but I don't know when that problem began or why. I've had no problems syncing my iPod Touch 4th Gen since I bought it many months ago.
Other programs such as Apple Mail are syncing my Notes just fine. I've upgraded the iPod software each time a new version came out, I'm syncing from a MacBook Pro. It doesn't appear that any items other than ones coming from Entourage 2008 are affected.
Perhaps something in one of the Apple iPod upgrades caused this, or a setting was changed accidentally - which I doubt, but anything is possible.
I'd appreciate any assistance since my contacts and calendar are of utmost importance to me and must be correct and up to date.
Thanks, GregThis sounds like the same problem I am having. The error I got was Ox E80000 24 that first O could have been a zero, not sure.
Edited to add I have iPod touch, iOS 6.1.6 -
Why is the iPod Touch (4th Gen) missing the video setting for TV Out?
Has anyone else noticed that in the iPod Touch (4th Gen) that there isn't a video setting for TV Out? It's not on the new iPhone either. I wanted to attach an AV Composite cord from my iPod to my TV. It won't work because of the missing video setting. You would think that since this is new technology, it would have that setting. After all, my iPod from 2005 has that feature and works just fine with the $39 AV Compostie cable from Apple. I was hoping to display what I have on my iPod Touch to my TV, but discovered that I couldn't. When I called Apple, they thought at first I had a defective cable. But later told me that i OS 5 left out the video out feature as if by mistake. Could anyone elaborate on this issue? I would appreciate it. Thanks!!
I am well aware that setting was on the iPod before iOS 5! My question is why is it missing? Because right now, Apple is selling the AV Composite cable claiming it's compatible with the iPod Touch (4th Gen) and it's not. Thank you!
-
My new ipod touch 4th gen with ios 6 wont play soun in the headphones, but only through the speaker when my head phones are unplugged
- You do have the volume set all the way up?
- Have you tried another pair of headphones/do the headphone work in other devices?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the headphone plug a dozen times or so.
Try the following to rule out a software problem:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Make an appointment at the Genius Bar of an Apple store. It seems yo have a hardware problem, likely a bad headphone jack.
Apple Retail Store - Genius Bar -
TS2771 Why does my ipod touch 4th gen not have any sound when on dock?
My daughter's ipod touch 4th gen did work on a dock and no longer does. I have read a number of pieces of advice - download an update of iTunes, reset to original settings, neither seems to have helped. As it is less than 12 months old, do you think I return this as it is still under warranty? She got a dock for Christmas and is VERY disappointed that her iPod does not work on it, even though her old CHinese copy of an ipod (1st) will work on the dock. HELP!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic. -
Ipod touch 5th gen says not able to charge when imusing the cable that came with it
My Ipod touch 5th gen says charging is not supported with this accessory when the cord im using is a cable that came with it and the cable is less the 5 days old. i also know the usb slot works for powering the ipod because it was before. i have treid useing different ports on more than one computer but with no luck. any help would be lovely
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Why does my ipod touch 4th gen battery life drain so quick
I've had my iPod touch for a few years now, but recently The battery life drains very fast, even if I go on one app it goes down half way after charging it full, I don't know why? My iPod will last me 30-1hour, is there a way of fixing this? :-)
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem that indicates a hardware problem. Likely a bad battery.
Apple will exchange your iPod for a refurbished one with a new batter for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following isless. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchase a replacment for about $10
iPod Touch Repair – iFixit
Maybe you are looking for
-
I can NOT see all my songs on iPhone5 since activating iTunes Match about a week ago! ALL songs are available on my iPad3 ALL songs are available on my Win7 computer iTunes I just did: Transfer purchases from iPhone and a Music Sync NOTHING. Tunes an
-
How can i use the internal table as a WHERE clause ?
Dear Support , I have one internal table that save the material information ... data : begin of itab , matnr like mara-matnr , end of itab . And now i want to fetch the material desription text base on this internal table . As i know that t
-
How to create a list with customised listItem
I want to create a list with 2 icons and text. I want to display one icon at the left, one icon to the right and text at center. Everytime my icon images might change. I want to know how create this type of list.
-
Problems Delta Extractor after Homogeneous Source System Copy
Hi, We have R/3 system landscape HUD, HUQ, HUP. And we have BW system landscape BWD and BWP. We connect BWD to HUQ and BWP to HUP. We made a homogeneous system copy from HUP to HUQ. We haven´t made any homogeneous system copy from BWP to BWD. We have
-
ORA-27369:job of type EXECUTABLE failed with exit code + rman???
Hi all, I was trying to execute job from 10G (10.2.01) Enterprise Manager Database Control, and got error below ORA-27369:job of type EXECUTABLE failed with exit code: Network is down STANDARD_ERROR="/home/oracle/scripts/backup/backupset_full:rman: c