Why is my ITunes not working?

Hi,
I'm new to apple and downloaded iTunes today for the first time in years. Once it was completed i tried to boot it and all i get is "iTunes has stopped working"
I am running windows 7 ultimate 64bit
I have tried Restarting, Running as admin and Running in safe mode, however none of these worked. I am running out of idea's any help is greatly appreciated.
Regards,
Jack
This is the exact message:
Problem Event Name:
APPCRASH
  Application Name:
iTunes.exe
  Application Version:
12.1.1.4
  Application Timestamp:
54de1991
  Fault Module Name:
CoreAudioToolbox.dll
  Fault Module Version:
7.9.9.6
  Fault Module Timestamp:
54ddd41b
  Exception Code:
c000001d
  Exception Offset:
00000000001fa332
  OS Version:
6.1.7600.2.0.0.256.1
  Locale ID:
1033

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Similar Messages

  • HT1926 Why is my iTunes not working properly on windows 8? please help me

    Good afternoon,
    I have recently perchased a HP laptop with windows 8, I am not overly impressed with the design but what really upsets me is that my itunes is not picking up my iphone or ipad when opening Itunes on the laptop. On the off chance that it does, it just connects and reconects but does not go sny further.
    Kind regards
    Dizzy

    Run windows update to ensure that your system is current (even if you just purchased it, there may be updates available).
    After running windows update, you may need to remove and reinstall iTunes to make sure everything is in the right place.
    This troubleshooting assistant may be of assistance:
    http://www.apple.com/support/iphone/assistant/itunes/
    If you are going to remove and reinstall iTunes, follow this KB article:
    http://support.apple.com/kb/HT1923
    Hope this helps

  • I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Why iTunes not working on Mac OS X Lion?

    Why iTunes not working on Mac OS X Lion?

    iTunes is also working fine for me under Lion. If you'll provide details as to the problem you're experiencing, perhaps someone here can help you solve the issue.
    Regards.

  • Why does a movie I bought on iTunes not work without internet?

    Why does a movie I bought on iTunes not work without internet?

    As long as the film has been fully downloaded (or synced from your computer's iTunes) then you should be able to watch it in the iPad's Videos app without needing to be online - is that how you are trying to view it ?

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • ITunes Not Working [at all..;need help!; very detailed.]

    Hello.
    My iTunes doesnt work at all. When I click on iTunes, it doesnt open or anything. I have uninstalled it and then re-installed it many times, it didnt work. Because of my iTunes not working, i had no choice but to put my songs on manually using Rockbox [an alternative fw]..
    And now i really need help, cause it is really annoying to put my songs on manually!
    Help?
    BTW i have norton installed, is that why it may not be working?
    --Aaron R.

    FYI, there's an iTunes forum where you may have
    better luck. You can try posting over there
    Anyway, I'm not really sure. Does it show up in the
    task manager? Is there an iTuneshelper.exe process?
    Tom
    yeah, there is an itunes helper.exe process.
    well, im going to post it in the itunes forum.look for it over there.

  • Why are my films not working :L

    why are my films not working the soung is all out off place and it is doing my head in can some one help me :L X

    Welcome to the Apple Community.
    Licensing, in a word. The movie studios will not allow Apple to add movies to iTunes in the cloud.

  • Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

    Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

    Yes. you should keep your media in iTunes, and indeed you should also keep a backup of your library as well. if you have the device set up for manual management then the content would remain on it when deleted from the library, but you would have no way to restore the device if there was a problem.
    See also: Getting iTunes & Windows Media Player to play nicely
    tt2

  • Why did my itunes stop working?

    why is my frikken itunes not working, just stopped opening, says error new itunes library

    Have you tried restarting, the Apple TV, your router and your mac or PC.

  • Why does quicktime does not work on os lio

    why quicktime x does not work on OS Lion

    QuickTime does work under 10.7, however you may want to check that you're opening the newest copy of it by going to your Applications folder and opening it from there.
    If you keep having trouble with opening it, please let us know what error you might be getting. QuickTime X will open with just a menu bar, then you can go to the file menu and choose to open any file you wanted to open, or choose one of the screen or audio recording options.

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Why does Acrobat suddenly not work on my Mac (won't open pdf files from a web page), yet I can open them from my iPhone? Everything worked fine yesteray.

    Hello:
    I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
    I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
    I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
    I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.

    Thank you.
    I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
    However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
    Many thanks.
    Charles
    Charles Deister
    (503) 949-5762
    [email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
            PO Box 5032
         Salem, OR 97304
    http://www.pilotstrat.com<http://www.pilotstrat.com/>
    This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

  • Itunes not working, get "missing file, reinstall itunes" message.

    1.  Itunes not working, get "missing file, reinstall itunes", message.
    2.  When try to reinstall itunes, gets as far as "starting services", then stops with message, "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services."
    I am logged in to my laptop as Administrator.
    3.  After selecting "retry" and "ignore" a few times, install went ahead and got "Congrats, you have successfully installed itunes"
    When I went to itunes I got, " Itunes not installed correctly, please reinstall. Error7 (Windows error 126)".
    4. On reinstalling itunes yet again, got, "Programme cannot start because MSVCR80.dll is missing. Try to reinstall programme"
    Help !!!

    See if this post from turingtest2 helps : https://discussions.apple.com/message/24620553#24620553
    There is also this user-tip for troubleshooting issues with iTunes for Windows from turingtest2 : https://discussions.apple.com/docs/DOC-6562

Maybe you are looking for