Why is my language malayshain, when i get informations about my password?

By changing Password it does not inform me in my language, german, i get the informations in malaysian!
my choose language is german and all other things are written in german or in english

Because of constraints imposed by the Sarbanes-Oxley Act in the United States.
(73113)

Similar Messages

HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

Maybe:
iOS: Troubleshooting Messages

I have forgotten my administrator password, and there are no hints. I have a Mac OS X Mavericks. When I get to the reset password screen, it has no hard drive to select. What now?

I have forgotten my administrator password, and there are no hints. I have a Mac OS X Mavericks. When I get to the reset password screen, it has no hard drive to select. What now?

If you're using FileVault, you first have to unlock the startup volume in Disk Utility. Select it and click the Unlock button in the toolbar. Of course, this is only possible if you know another password to unlock the volume. If you don't, follow instead these instructions.

How to get information about limitation Internal Memory on device

hallo ..
have some question here, so please some person able to answer my questions
1. How to get Information about limitation internal memory on device
2. is possible to improve internal memory on Blackberry ( move apps on external memory )
3. any tools to get internal memory activity ?
thanks for this people who joins here, hope we can share more information about blackberry ..

In addition...
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
KB05461MicroSD card sizes supported by the BlackBerry device software
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
KB14320How to maximize free space and battery power on the BlackBerry smartphone
KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Getting information about an object from JList

Hi
I have created a movie application and i have a JList displaying all registered movies, it uses a DefaultListModel to display these.
I want to be able to click on an element in the JList and then push a button called "Show movie details" to display all information about the selected movie.'.
Every new movie is added to the DefaultListModel as an object with "Titlle", "Genere" etc. If someone click on a movie, what do i do to get information about which object that was clicked. All i can see is that integers can be returned with the getSelectedIndex/Value methods. If i use one of these methods to get the object from the DefaultListModel, that would work i guess, but what when someone deletes a movie in the middle of the JList, then the indexes wouldnt match.
Can someone help me out here? :)

I get a big fat exception when trying to cast the returned object to a Movie object which im using.
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: java.lang.S
tring cannot be cast to Movie
...sure that this is the way to do it? If so, what am i doing wrong..

Has anyone else been getting emails about reseting password

Has anyone else been getting emails about reseting password when they have not requested it? I have been getting several emails for the past couple of days where it says how to reset when I never asked to do so. Is there anything that should be done about it? Or anything apple can do about it for my email is very different and not easy to guess or duplicate.

you got the ping app, this app is sending greeting pings and message of promo price for it in the cost version

Howto get information about available queues?

Any ideas how to get information about available queues on a Weblogic Server to browse them?
          When you have the jndi namespace and the name of the queue it's no problem to browse that queue, but when you don't have the name of the queue is there a way to still be able to browse the queue(s)?
          Any information is warmly welcomed.
          Thanks,
          Chris

A QueueBrowser is currently the only way to view message contents. WebLogic 9.0 (out in beta now), provides comprehensive message management both via console and JMX.
          For 8.1, the following links may help get you started.
          JMS technology page:
          http://dev2dev.bea.com/technologies/jms/index.jsp
          WebLogic public management/monitoring APIs:
          http://edocs.bea.com/wls/docs81/jmx/index.html
          jsp based dest browser (which ultimately uses a QueueBrowser):
          http://dev2dev.bea.com/codelibrary/code/jmsdest.jsp
          JMS statistics dump:
          http://dev2dev.bea.com/codelibrary/code/jms_stats.jsp
          Tom Barnes, BEA

How to get information about creation of a virtual machine on a Hyper-v host.

Hi,
How to get information about creation of a virtual machine on a Hyper-v host?
I need: host name, time created, creator user.
I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
Thank's in advance.
Denius Valiant

For Host Name * Created Time Use This Command In PowerShell
Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
and for Create User , As i know you should see on Event Log .
Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational
You can see in Event Log who create the Vm.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

How to get information about cursor? I had only a reference on it.

Hello
How to get information about cursor, that I receive in my procedure as a reference. For example I need to know, a number of columns. I know nothing about this cursor, except the link on it.
Best Regards, Kostya Proskudin!

However, I would seriously reconsider what you are trying to achieve.
It looks like you are trying to write some ultimately generic cursor processor. i.e. pass any cursor and process it in some generic way.
Good design should include knowledge of what is expected to be passed and that knowledge can be put into the code.
Generic code is inherently difficult to maintain and debug and will never 100% deal with all possible situations e.g. even if you know the table being queried in the cursor you can't rely on the data dictionary to give you all the returned columns if some of the returned columns of the cursor are computed columns.
Be careful you aren't writing something that's going to cause problems later.

PDF DOM - getting information about underlining

Hi, I‘m trying to prepare PDF documents for blind users. For this I have to extract the visual information of the text and there font style.
And this is my problem:
I read the PDF document through the Acrobat or Adobe-Reader application via UI-Automation, Microsoft Active Accessibility and the Adobe intern Accessibility library to access the PDDom.
In all these different way there is no way (that I found) to getting information about if a word is underlined or not.
Did anybody know a way to do this, or is it impossible to get information about that?
Thank u for your interest in my post and for all the helping ideas that will be posted.
J

select prv_value from ctx_user_preference_values where prv_attribute='PATH'
and prv_preference='MY_PREFERENCE_NAME'
But note that you'll need to rebuild the index before this will take effect.

Oracle BPM Java API - getting informations about process activities

Hi
I have a problem with Oracle BPM Java API, can someone help me?
I have a business process project deployed in Oracle SOA Suite and I need to get some informations of my process programatically via Java API.
Basically I need to get informations about process activities and the corresponding human tasks referenced by these activities.
I'm able to get the HumanTasks of my Business Catalog and also to get the Activities of my Process, but the relationship between them is null.
I did some tests, below a piece of code of my test:
IBPMServiceClient bpmServiceClient = BPMConnectionUtil.getBPMServiceClient();
IProcessMetadataService processMetadataService = bpmServiceClient.getProcessMetadataService();
IProcessModelService processModelService = bpmServiceClient.getProcessModelService();
List<ProcessMetadataSummary> processMetadataSummaryList =
processMetadataService.listProcessMetadataSummary(BPMConnectionUtil.getBPMContext(), "processNameOrId to find", "processName", "ASC");
if (processMetadataSummaryList == null || processMetadataSummaryList.size() == 0)
return;
ProcessMetadataSummary processMetadataSummary = null;
for (ProcessMetadataSummary summary: processMetadataSummaryList) {
if (summary.isIsDefaultRevision()) {
processMetadataSummary = summary;
break;
if (processMetadataSummary == null)
processMetadataSummary = processMetadataSummaryList.get(0);
IProcessModelPackage pack = processModelService.getProcessModel(BPMConnectionUtil.getBPMContext(), processMetadataSummary.getCompositeDN(), processMetadataSummary.getProcessName());
oracle.bpm.project.model.processes.Process process = pack.getProcessModel();
Sequence<UserTask> activities = process.getActivities(UserTask.class);
for (UserTask activity: activities) {
System.out.println("Human Task: " +activity.getHumanTask()); // <<<<<<<<<<<<<<<<<<<<---------------------------- here is the problem. the human task is null, but my activity have a task associated
There is another way to get this information?
Thank's

Hi
I have a problem with Oracle BPM Java API, can someone help me?
I have a business process project deployed in Oracle SOA Suite and I need to get some informations of my process programatically via Java API.
Basically I need to get informations about process activities and the corresponding human tasks referenced by these activities.
I'm able to get the HumanTasks of my Business Catalog and also to get the Activities of my Process, but the relationship between them is null.
I did some tests, below a piece of code of my test:
IBPMServiceClient bpmServiceClient = BPMConnectionUtil.getBPMServiceClient();
IProcessMetadataService processMetadataService = bpmServiceClient.getProcessMetadataService();
IProcessModelService processModelService = bpmServiceClient.getProcessModelService();
List<ProcessMetadataSummary> processMetadataSummaryList =
processMetadataService.listProcessMetadataSummary(BPMConnectionUtil.getBPMContext(), "processNameOrId to find", "processName", "ASC");
if (processMetadataSummaryList == null || processMetadataSummaryList.size() == 0)
return;
ProcessMetadataSummary processMetadataSummary = null;
for (ProcessMetadataSummary summary: processMetadataSummaryList) {
if (summary.isIsDefaultRevision()) {
processMetadataSummary = summary;
break;
if (processMetadataSummary == null)
processMetadataSummary = processMetadataSummaryList.get(0);
IProcessModelPackage pack = processModelService.getProcessModel(BPMConnectionUtil.getBPMContext(), processMetadataSummary.getCompositeDN(), processMetadataSummary.getProcessName());
oracle.bpm.project.model.processes.Process process = pack.getProcessModel();
Sequence<UserTask> activities = process.getActivities(UserTask.class);
for (UserTask activity: activities) {
System.out.println("Human Task: " +activity.getHumanTask()); // <<<<<<<<<<<<<<<<<<<<---------------------------- here is the problem. the human task is null, but my activity have a task associated
There is another way to get this information?
Thank's

How do I get information about filing a claim for kids purchases

How can I get information about making a claim for kids unauthorized purchase?

I have seen nothing formal from Apple though I have read they are open to discussions about the matter.
If it is an individual instance, there is a section on the purchase receipt that invites you to report a problem Report the purchase and the circumstances.
However, if it is a recurring problem you would have been expected to utilize the parental control features.

Why is my language malayshain, when i get informations about my password?

Similar Messages

Maybe you are looking for