Why is my laptop slowing right down when itunes is installed?

i have a windows 7 laptop that i have installed itunes on and it has slowed my laptop right down. the cpu usage is going up to 100% and it is taking at least 5 minutes to do any basic actions such as opening an application (ms Word etc). i have 2gb of ram and decent intel with it. i cannot understand why when i have loads of memory left and the programme isnt actually open. and when i do manage to get it open, it wont let me access the itunes store. is there a way of turning itunes off for when im not using it like you do on the ipod for example, and turning it back on when i need it again?
And i cant understand why it wont let me access the itunes store. the firewall is not blocking it and i have a decent wifi connection although the dagnostics on it says i dont have a sercure wifi connection. any ideas for this?
Thanks

This looks better
     int trakx[] = new int[20];
     int traky[] = new int[20];
     int pos = 0;
     int i1  = -20;
     int i2  = -10;
     int i3  = -2;
public void newPos(int x,int y)
     i1 = (i1+1)%20;
     i2 = (i2+1)%20;
     i3 = (i3+1)%20;     
     trakx[pos] = x;
     traky[pos] = y;
     pos = (pos+1)%20;
     repaint();
}public void paint(Graphics g)
if (i1 >= 0) g.fillOval(trakx[i1] - 20, traky[i1] - 20, 40, 40);
     if (i2 >= 0) g.fillOval(trakx[i2] - 10, traky[i2] - 10, 20, 20);
     if (i3 >= 0) g.fillOval(trakx[i3] - 5 , traky[i3] - 5, 10, 10);
Noah
     

Similar Messages

  • Why does my mac pro slow right down when its on battery ???

    Why does my mac pro slow right down when its on battery....... cant watch dvds as they keep jumping, internet slows down as does everything, then i run it off the mains and its all fine again, so my mac book pro has not become very portable, please help

    Yo , yeah its a mac book pro, noly got it about 6 months ago, not sure if it has a removable battery, it all looks completely sealed, this is what it said in the battery menu:
    Model Information:
      Serial Number:          W01264M3HD3BA
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0201
      Hardware Revision:          000a
      Cell Revision:          0158
      Charge Information:
      Charge Remaining (mAh):          5021
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5923
      Health Information:
      Cycle Count:          49
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -958
      Voltage (mV):          11946
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Hope you can help, its reallly quite annoying considering its quite new.
    Cheers

  • Why does my internet slow WAY down when I have camera wirelessly connected

    This is a great camera for my purpose, but for some reason it is slowing my internet download to crawling speed when I have it connected wirelessly. Btw don't know if having it done wired does any good.
    It used to work fine (without slowing down my internet) until I added a second wvc210 camera, so I removed the second camera and its still sloooow.  If I have it disabled (unplugged) then my internet is fine.
    Any suggestions?  Thanks for any advice.

    Hi johnkim575 and welcome to the Cisco Home Community!
    The WVC210 is now being handled by the Cisco Small Business Support Community.
    For discussions about this product, please go here.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • My Satellite laptop (A305) shuts down when run on the AC charger/adapter

    The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
    It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
    The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
    One interesting thing is that the _computer runs fine on AC when in safe mode_.
    I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
    It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
    This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
    I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
    Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?

    I have Satellite A300 and until now everything works OK.
    I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
    If not let OS run and put the battery.
    Is the battery recognized properly? Does notebook switch off again?
    To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
    Full diagnosis?
    And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

  • Why does my iphone 3gs shut down when battery gets to 80%?  have installed new battery and nothing changes?

    Why does my iphone 3gs shut down when battery shows 80%.  a couple of months ago is shut down at 60% but has continually gotten worse.  this was before 5.0.  i took it to a repair man and he tried a used battery, a new battery, and the original battery.  nothing helped.  5.01 didnt help either.  What is my problem?

    Fully discharge the battery (till it shuts down and won't turn on) and then fully recharge it (100%).  This will recalibrate the battery meter.  You may need to do this a few times.

  • CS5 suddenly slowed right down on PC Windows 7

    Hi,  my CS5 Illustrator, Photoshop & Bridge have suddenly slowed right down just in the last 3 or so weeks.
    Even a diagosis of my PC says it is running very slowly, so I read up on the trouble shooting advice, updated the graphics card driver that was the only thing out of date, did disc cleanups, deleted or moved a lot of big files to other drives, defragged, but still no improvement.
    I used to be able to open 300 mb files, but now just opening a 8mb file leaves my PC hanging, for about 10 mins.
    These are my specs, & Norton's analysis. Even though Norton says my Windows Firewall is dsabled (because I have a different firewall), it says 0 virus problems. What else could be happening?
    HP Pro 3130 Small Form Factor PC, running Windows 7
    4.00 GB RAM
    32-bit operating system
    4 processor cores
    64-bit capable
    3414 GB hard disks
    Disk partition (C:) 114 GB Free (460 GB Total)
    Disk partition (D:) 936 MB Free (6 GB Total)
    ATI Radeon HD 4550  Total available graphics memory 1899 MB
    Dedicated graphics memory 512 MB
    Dedicated system memory 0 MB
    Shared system memory 1387 MB
    Display adapter driver version 8.940.11.0
    DirectX version 10

    And you're trusting Norton on this, right? Sorry, but to be blunt: That's like fighting fire with gasoline. In fact Norton's tools have long been known to be as conspicuous and overly agressive as some computer viruses themselves. For all I know, it could be their bloated services, virus vaulting and endless scans at the most inconvenient times that drag down your system. Or conversely you do have a virus and Norton is constantly battling it. The long and short answer therefore is: Nuke your system, reinstall it from scratch.
    Mylenium

  • When itunes is installed missing file -45075 appears, any suggestions

    When itunes is installed missing file -45075 appears, any suggestions

    Me too.
    I have looked at 2-3 other posts, and they still fail to resolve this.
    I have reinstalled iTunes; I have repaired every other Apple component and ......
    Same message every time. 
    I am running fully updated Windows 8 (not 8.1 yet though)
    Looking at the number of posts in this discussion group, it does appear to be something that Apple could take a more proactive lead on.  Either a more meaningful error message, or ideally a fully loaded iTunes installation.
    COME ON GUYS - help us out here.
    If it wasn't that I NEED iTunes to manage and backup my phone, I'd uninstall the %^$*&^ lot.   That said, my 4G upgrade to the iPhone 5S is now in serious doubt ... maybe a time for a complete change.

  • Why does my macbook pro shut down when I close it?

    For about a week, SOME of the time when I close my lid, my laptop will shut down. It doesn't happen all the time, maybe about 50%, but when it does I have to hold down the power button for about 5 seconds, and then let go, then hold it down again for about 15 seconds to get it to turn back on. Has anyone else had this problem? I've had this laptop for coming up on 2 years.

    Reset your SMC, as described here:
    http://support.apple.com/kb/HT3964

  • IMovie Slowed Right Down

    What causes iMovie to slow wayyy down? It was dreadful last week when I was using it.  I cleaned up my PC system but I am about to make another movie and I don't need it to happen again. I have about 10 movies in iMovie.

    You are in a banded profile probably due to router dropping connection or manual resets or both
    Your connection will get out of banding if you stay connected 24/7 for 3/5days. Your noise margin will reduce to 15db with your speed increasing. Your noise margin will continue to fall over next few weeks with speed increasing each time it drops
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • HT201317 Why do my photos turn upside down when I send them as an email? Garry

    Why do my photos come out upside down when I send them via email?
    Garry

    This went wrong here:
    I went back and found the photos in the back up machine (25000) and dumped them on the iPhoto icon.
    Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
    The ! turns up when iPhoto loses the link to the original photo.
    I would suggest that you restore that library from Time Machine again, and then try repair it.
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • Laptop automatically shuts down when connect ipod PLZ HELP

    Well basically my ipod 30gb video shuts down when i try to put a video or picture on it however when i put songs on its fine.

    All I can offer is these list of solution steps, perhaps it's a software problem or you need to do a SMC or PRAM rest
    Step by Step to fix your Mac

  • PC crashes when itunes is installed and I connect my iphone

    I am running Windows XP Home and just reformatted my hard drive in an effort to figure out why my pc would crash every time I hooked up my iphone 4S via USB. The pc screen would go black immediately and then the pc would reboot.
    I have service pack 3 and all my windows updates are up to date. All my drivers are also up to date. I have not installed a printer, web cam, or other imaging device. I could now plug my iphone in via USB and windows xp recognized it as an image device and opened a folder with all of my iphone photos inside it.
    However, as soon as I installed the latest version of itunes and tried to conect my iphone to synch, my pc crashed as it had before, with the black screen and reboot. As long as itunes is installed it does this every time.
    I uninstalled itunes and my pc went back to recognizing the iphone as an image device and opens a folder with all of my iphone photos inside it.
    Any thoughts on what's happening here?  I am stumped and don't know what else to try.  Thanks!  :-)

    Is your computer a laptop computer or a desktop?
    Look at the underside if it is a laptop and you should find the make/model. Look at the back if it is a desktop.
    Even more basic, is it a Mac (Apple computer) or a PC?
    To find the OS if it is a PC, do a restart when it reboots it should say WindowsXP or Windows Vista, or Windows 7. If it is a Mac click on the Apple in the top left hand corner then click on About this Mac. A window will open and you should find the OS version number, like 10.4.11 or 10.5.8.

  • Why is the rendering process slowing right down?

    Hi,
    I'm rendering a 4 minute clip of Pro Res LT files, there's a few effect on it but right now I'm only rendering the video at 1/4 quality.
    It starts rendering fine. Then starts to slow down, and by the time it gets to about 99.35%, it takes hours to render about 0.10 %, still rendering now, has been rendering over night, and is still on 99.54 %.
    Every time it renders another frame, it adds another frame onto the amount that still needs to be rendered. And the estimated amount of time left stays about the same - between 3 and 4 minutes (not true).
    I'm working on a Mac, with 4GB of RAM, but also rendering to an external hard drive that should have about 400GB free.
    Help please!
    Ashleigh

    ah! "locate" is a command you can use to search (inside Terminal,) though you should keep in mind that its database is only updated once a week by default, however, you can update it manually whenever you like, which takes a few minutes, using (in Terminal):
    sudo /usr/libexec/locate.updatedb
    actually, you could always automate that by adding this to the following file: "~/.bash_profile"
    [begin --don't include this line]
    alias locate='if [ $((`date +%s`-`eval $(stat -s /var/db/locate.database); echo $st_mtime`)) -gt 3600 ]; then echo "locate: db is too old!">/dev/stderr; sudo /usr/libexec/locate.updatedb; fi; locate -i'
    [end --that code is all you need, and it needs to be kept together, all in one line]
    f.
    Note: if you need to create the file, (in Terminal) use:
    touch ~/.bash_profile

  • HT1338 why is my laptop shown as unknown when devices are listed in "find my mac"?

    Among other devices, I purchased a MacAir laptop.  When I looked at the "find my iPhone and find my iMac" list recently, I noticed that the MacAir was listed as a unknown device. 
    How do I change that status to reflect that it is Me?

    The fingertips vibrating persistenyly would seem to rule this out but my experience with electricity with my MacBook and my MacBook Pro is the shocks are my fault, not the equipment. Static buildup, especially during winter, is to blame. When it's dry (like it is here right now) it's a lot worse, all I have to do is squirm a little on the couch to send tingles across my hands or generate a nice loud pop.
    When I walk up to my MBP I've taken to the habit of pulling my MagSafe adapter by the cord and touching it's outer connector to discharge excess static before touching my kit. Though, as I'm sure someone will point out, there is probably a good explanation as to why this is a really stupid thing to do.

  • Aperture slowed computer down when importing large library

    Hi, I recently imported 47,000 photo's into Aperture 2 from Iphoto. The entire process took several hours but when it was importing, my computer slowed down to a crawl. My browser took a while to open, Iphoto was slow to open and just about any program took much longer to load. Any task took much longer. I kept seeing the spinning ball when using Aperture. Has this happened to anyone else? Should I be concerned? Any info is greatly appreciated

    Not at all. Aperture's just using all the computer's resources as importing 47,000 photos is a very processor intensive job. Once it's done, all should be back to normal.
    If it's still running slow after they've all been imported and all the thumbnails/previews have been made, then that's a bit odd.

Maybe you are looking for

  • G/L account to restrict the document type selection in F-02

    Dear All, one of my client want that when ever he post any business transaction from F-02 the G/L accounts will determine the document type ,it will resctrict any other documnet type to be used. for example if their is a payment to bank for bank chan

  • CSS giving different results when defined locally, and when defined using an include file.

    In my experimental photo album page I originally defined the styles in a separate .CSS file. However this appeared to be incompatible with the requirement to have the session_start (); statement at the start of the file, so I then defined the styles

  • Some issues in test db

    Hello experts os: sun solaris db: 10 g R2 I found some problems in my test database I have tried to 1) create 1 tablespace with size 1 gb of datafile with autoextend clause... the query went into halt to very long time , so i have cancel the statemen

  • Error creating a response stream

    I am trying to connect a client running on WLS 6.1 sp4 to a server on WLS 5.1 sp12. When the client running on vip1.xxxxx054.yyyy.net, the client firewall sees us leaving as 20.56.349.20/21, and the server fw sees us come in as 20.56.349.20/21, but w

  • UML and BPM

    Hello, I'm new and was wondering if anyone used UML in the design phase of ADF projects, and also I"m wondering if BPM is pertinant to the JDeveloper programmer. Thanks, Bob