Why is my macbook not charging? And how do I fix it?

I bought my macbook in 2008, so it is 5 years old.  Recently, it started to not charge when it is plugged in.  If I hold the charger firm to the side of the port, it charges, but otherwise, it will charge for a few minutes and then quit.  I am not sure what is going on.  I use my computer a lot for school, so I am frantically trying to find a solution for this problem.  Any advice?

Sounds to me like you have a dirty connection between the charger and the macbook. First check that out. Cleaning electronic contacts is best done with a suitable spray cleaner, like this one (no endorsement implied, this link is to clarify not to promote a specific product):
http://www.amazon.com/Electronic-Spray-Cleaner-Citrus-Scent/dp/B0006ZH9NU
But just in case it's the battery that is at fault, you can check it out with this little beauty (this is a recommendation!):
http://www.coconut-flavour.com/

Similar Messages

  • My computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything

    my computer is telling me i do not have permission to access the requested resource to update my iphone 5 to the new ios 7. why is it telling me this and how can i fix it, I have updated itunes and everything

    I saw this post at about 2:05 becasue I had the same problem. I just tried it again and now the update is downloading! just wait it out. I had to wait about 3.5 hours.

  • TS3694 why is there an error 9006 and how can i fix it?? please answer for ipad mini

    why is there an error 9006 and how can i fix it?? please answer and btw its an ipad mini

    if you are trying to download and install ios7, it is probably because of the enormous amount of traffic apple's download servers must be experiencing. things should return to normal before too long, just hang tight

  • Why is my Bluetooth no available on my macbook pro? And how do I fix this problem?

    I am trying to access my bluetooth on my macbook pro, but when I click on the bluetooth symbol it has a squiggley line through it and say not available.  How can I fix this?  I already tried resetting the PRAM.  Please help!  Thanks!

    Do you have it set to ON in System Preferences>Bluetooth?

  • Why is my itunes music skipping and how do i fix it?

    my music is skipping when i play it, and it is not music that i have burned from a scratched cd, and it worked without skipping a day ago. it is not just one song, most of them skip at at least one point in time on the song. the only thing that i could think of that may have caused this is that the other day when i tried updating my ipod the cable fell out and so it was unplugged from my computer in the middle of an update, which is obviuosly bad, and then when i tried updating it again it got stuck on one song that i have since deleted. the music on my ipod that i updated works fine too. so could that have caused the problem, and how do i fix it?

    Jeff, is the music skipping in iTunes? Or is it on the iPod?
    If in iTunes, try this:
    MacMuse, "iTunes sounds funny" #1, 11:48pm Oct 8, 2004 CDT

  • PRINTER PROFILE WHY IS MY PRINTER NOT LISTED AND HOW CAN I ADD

    I have just installed Lightroom 5 and went to set up profile of printer and my epson stylus pro 4900 is not listed.  How can I add

    Lightroom does not show a full list of all the profiles present in the computer. This would be unmanageably long, including a lot of irrelevant choices.
    The user customises what is seen.
    In the Print Job / Color Management section of the Print module, is a "Profile" selector. The lowest item in the menu that opens when you click on this, is "Other..."
    Selecting this opens a new dialog, listing all the color management profiles that the OS currently knows about. Putting a check next to any printing output profile, makes that appear in the LR profiles "shortlist" hereafter. This would usually state a specific paper type, for a specific printer (and inkset if nonstandard).
    AFAICT the exact same "shortlist" appears in softproofing too - in that case, AdobeRGB and sRGB are automatically offered as well.

  • Why my contact number disappear suddenly and how i can fix it?

    May be cause by i delete the iCloud email account but why i even can not  find in my computer

    Do a hard reset by pressing and holding the sleep/wake button and home button together until apple logo appears.

  • Why is my wireless greyed out and how do i fix it

    My wireless is greyed out for about a week now how do i fix this???

    Bluetooth or Wi-Fi grayed out

  • Why does my MacBook pro freeze and how do i stop it?

    Hello
    I have recently bought a new MacBook Pro, late 2011 13'' 2.4 GHz. It has started freezing alot. I don't know if it needs more RAM, a problem with the hard drive or faulty application. So I was just wondering if anyone could give me advise on how to stop it and why its happening.
    Thanks

    Is this very recent? Did you install the new Thunderbolt/Ethernet update?
    Clinton

  • Macbook not charging and no light coming on

    Just today my macbook ran out of battery and I went to charge it and no light comes on. Also the case n the charger port looks a bit pushed back. Any help is appreciated

    Try a different charger. If no change, try a different battery. Still not working? Take the MacBook in for service.
    Best of luck.

  • I cannot get firefox to open at all. I tried doing the thing through task manager but it doesn't have anything firefox running at all. Why is it not opening and how can i fix it!!!!!!!!!!!!

    I don't know what to d to open it i've tried all i could think of!!!

    OK - undo the changes you made to DEP.
    Open Firefox - take a screenshot of any message that appears and post back here

  • HT1476 My iPhone wont charge anymore, at first it would.. But now it won't even show that its charging.. Why is it doing that? And how can I fix it? I need my phone, and i can't replace it or anything like that... :/

    I really need my phone, it hardly ever gives me any trouble. This is pretty much the first time.. I hope any of you can help me. It would mean everything to me.

    Try a different cable.
    Try a different charger.
    Try a different USB port on your computer.
    Try restoring it using iTunes.

  • Why did my print size change and how can I fix it??

    I have an HP Deskjet 3745, for a while now. Works great until last week, when it started printing way too large. What would normally fit on one page now fills up two pages, but the right side prints off the page. I use it for basic printing of pay stubs, some emails, web coupons, stuff like that. Using Windows XP. I have tried re-installing the driver and going into printer properties with no luck. The option to "print to fit page" is not highlighted.
    Any advice??

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Why am I getting this error and how do I fix it?

    I am new to actionscript. I am following a tutorial on lynda. I am trying to learn how to create flash games. I am using flash cs4. The tutorial uses flash cs3 and and actionscript 3.0. I added a movie clip to my library and enabled export for actionscript. I got a dialog box that says "a definition for this class could not be found in the classpath, so one will automatically be generated in the swf file upon export." I click ok. Then when I try to test it, I get an error that says "call to possibly undefined method". What exactly am I doing wrong?

    Try modifying your class and your code as follows...
    change the class linkage to be Cursor.  Not that it is wrong, but classes typically have upper case letters to make them easier to identify in code.
    then, do not use the name of the class as the instance name....
    var cursor:Cursor;
    function initializeGame():void
    cursor = new Cursor();
    etc...

  • Why is my battery coming apart and how do I fix it?

    The cover on the battery is lifting at the corner of the battery that has the lights showing charge status (not the corner where you press the button to light the charge status lights) The cover is separeted by one-eight inch at the corner and the separation tapers along the long side of the battery to zero at the lock end. If I press the cover, I can get it to go back together. I am considering using some glue to see if I can get it to hold together. Any ideas?

    Jeff, is the music skipping in iTunes? Or is it on the iPod?
    If in iTunes, try this:
    MacMuse, "iTunes sounds funny" #1, 11:48pm Oct 8, 2004 CDT

Maybe you are looking for

  • How can I connect my MacBook Air to my Brother printer?

    I have a Brother wireless printer and I'm trying to figure out how I can connect it to my MacBook Air. It came with 2 CDs, but since my laptop doesn't have a CD-rom, I obviously can't set it up that way. And the set up booklets don't say anything abo

  • IPod Touch 4G frozen on restore

    Hi folks I have an iPod Touch 4G. It is a replacement as my old one failed to work anymore (freezing on restore and had pixel issues anyway). My new one has the most up to date IOS 4.3.5. Today I added my apps back onto it with no issues. When I adde

  • Site-to-Site VPN between ASA & PIX

    Hi everyone, If this has been posted before, which it probably has, I apologize in advance. Basically, I have to configure a VPN between our NY ASA and a PIX we shipped to our LA office. The PIX is replacing an old Cisco router. The ASA is our main d

  • BPC transport

    Thanks for all information. When I did the transports, I have seen that dimension members were not transported and I was required to recreate it allover. After doing the first transport, when I do the transport for 2nd time the whole appset is copied

  • 2.1 not sending signal

    I have the the Sound Blaster X-Fi Professional. I also have the Creative T20 Gigaworks speakers... I also have a Polk Powered Sub Woofer I'm trying to setup 2., with the audio card sending mids and highs to the T20 speakers...and the second output se