Why is my MacBook Pro (Early 2011) so slow!!!
My Macbook Pro (Early 2011) with intel dual - core i7 4 gb RAM so slow. It came with Snow Leaopord and upgraded it to Lion, then uprgaded it to Mountain Lion. Whenever I run one of the Adobe CS5 apps it gets reeeeaaaaaaalllllllyyyy slow. It used to not get slow at all. Also when I have FCPX open it gets really slow. I used to be able to run Photoshop and Safari at the same time and now it is really slugish and slow. Is there anthing I can do to clean it up and make t run faster?
Thanks
Follow Sig's suggeston in adding more RAM.
Photoshop and FCP are RAM dependent applications. With 4GB of RAM, open activity monitor and see your page outs and swap used.
I have 16GB installed - page outs - 0. swap used - 0. see image below.
8GB should be a perfect upgrade for what you're using it for.
Good luck.
Similar Messages
-
Macbook pro early 2011 freezes, slow, weird fan noise + trackpad jumping around
Hi guys, see the Etrecheck report below. My 13' Macbook pro (early 2011) has been very slow for the last few months, the fan makes a weird blowing noise (several fellow students have looked around what the **** that noise was when it started doing it), and recently started freezing when opening iTunes, OpenOffice and even Firefox.
OH AND my trackpad has jumping around without me even touching it.
What do you guys think? What's the problem, what can I do? IF I take it in how much do you think it might cost?
Problem description:
Macbook is slow, freezes for few seconds regularly, and fan makes weird noise
EtreCheck version: 2.0.11 (98)
Report generated 7 Nov 2014 15:16:23 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 6:13:14
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (378.53 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.48 - SDK 10.6) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.48 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.2.48 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.2.48 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.2.48 - SDK 10.6) Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[invalid?] com.maintain.CocktailPurgeInactiveMemory.plist Support
[invalid?] com.maintain.CocktailSystemEvents.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.sophos.uiserver.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.maintain.CocktailScheduler.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.rim.BBDaemon.plist Support
[running] com.sophos.common.servicemanager.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
TuneupMyMac Application (/Applications/TuneupMyMac.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 12.1.0r150 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
AdobePDFViewer: Version: 10.1.12 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
User Internet Plug-ins: ℹ️
RealPlayer Plugin: Version: (null) Support
Safari Extensions: ℹ️
Slick Savings
Ebay Shopping Assistant
Searchme
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
6% WindowServer
1% plugin-container
1% BBLaunchAgent
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
464 MB firefox
90 MB Finder
82 MB System Information
82 MB TuneupMyMac
69 MB InterCheck
Virtual Memory Information: ℹ️
565 MB Free RAM
1.37 GB Active RAM
746 MB Inactive RAM
1.14 GB Wired RAM
2.21 GB Page-ins
46 MB Page-outsI did as you suggested and it it's definitely not freezing as much, though a little bit still. Thanks though!
Trackpad is also still jumping around, but I figured that might have to be replaced anyways.
Anything else you recommend that I could / should do? -
MacBook Pro(Early 2011) extremely slow speed on Yosemite(10.10.2)
Hi All,
I installed and then reinstalled a fresh Yosemite But now i am experiencing issues like very slow speed of the OS & fan continuously ON. Mavericks was working fine.
this is my ertecheck report
EtreCheck version: 2.1.8 (121)
Report generated 1 April 2015 12:03:11 am IST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
10 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Replace Soon - Cycle count 1329
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 4:1:57
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MacHDD_2 (disk0s4) /Volumes/MacHDD_2 : 349.63 GB (118.65 GB free)
MacHDD_1 (disk1) / : 149.11 GB (104.40 GB free)
Core Storage: disk0s2 149.48 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHDD_1: Disk size: 149.11 GB Disk used: 44.71 GB
Destinations:
MacHDD_2 [Local]
Total size: 349.63 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Adequate
Backup size 349.63 GB > (Disk used 44.71 GB X 3)
Top Processes by CPU: ℹ️
26% Microsoft Outlook
12% coreaudiod
6% Google Chrome
3% WindowServer
1% launchservicesd
Top Processes by Memory: ℹ️
215 MB mds_stores
193 MB Google Chrome
183 MB Google Chrome Helper
129 MB iTunes
107 MB Microsoft Outlook
Virtual Memory Information: ℹ️
5.04 GB Free RAM
3.41 GB Active RAM
698 MB Inactive RAM
1.59 GB Wired RAM
4.71 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 07:59:25 PM Self test - passedTry these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Macbook Pro Early 2011 so slow on Mavericks
I ran the EtreCheck app :
Can someone help tell me what is wrong?
Hardware Information:
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:21:45
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (88.56 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.bombich.ccc.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.cloudpath.maccmd.plist Support
[loaded] com.ea.origin.ESHelper.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] edu.vanderbilt.vuwer.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
FaceboxPro
Origin
AdobeResourceSynchronizer
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 7.0 Support
Default Browser: Version: 537 - SDK 10.9
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.2.3 - SDK 10.6 Support
AdobePDFViewer: Version: 8.0.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
0% fontd
0% Creative Cloud
0% aosnotifyd
Top Processes by Memory:
147 MB mds_stores
147 MB com.apple.IconServicesAgent
98 MB Safari
78 MB Finder
53 MB WindowServer
Virtual Memory Information:
1.43 GB Free RAM
1.29 GB Active RAM
277 MB Inactive RAM
1.01 GB Wired RAM
1.30 GB Page-ins
0 B Page-outsSorry, finally got around to working on this macbook again. About half the speed opening the hard drive and programs as before upgrading to Mavericks, ughh.
I updated the three programs and the system now to 10.9.4. It seems marginally better, but still way off is' performance on 10.6.8. Startup, shutdown, opening apps...really drag on. I cannot figure out the issue. Here's the Erte report now:
EtreCheck version: 1.9.12 (48)
Report generated August 4, 2014 at 6:56:59 PM PDT
Hardware Information:
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 3:55:39
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (84.73 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.bombich.ccc.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.cloudpath.maccmd.plist Support
[loaded] com.ea.origin.ESHelper.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] edu.vanderbilt.vuwer.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
FaceboxPro
Origin
AdobeResourceSynchronizer
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 7.0 Support
Default Browser: Version: 537 - SDK 10.9
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.2.3 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
5% ocspd
2% hidd
1% WindowServer
1% Mail
1% Creative Cloud
Top Processes by Memory:
233 MB mds_stores
205 MB softwareupdated
152 MB com.apple.IconServicesAgent
66 MB Mail
53 MB Creative Cloud
Virtual Memory Information:
1.06 GB Free RAM
1.46 GB Active RAM
471 MB Inactive RAM
1.02 GB Wired RAM
676 MB Page-ins
0 B Page-outs
any suggestions? -
Why is my 15'' macbook pro Early 2011 slowing down in performance often?
Why is my 15'' macbook pro Early 2011 slowing down in performance often? It's barely got anything in it and it lags alot of times. This is supposedly running on quad-core i7 2.2 yet I have to restart at times to make sure it gets better. Why is that so?
I turn on activity monitor and there aren't even anything taking up power or memory. It just lags out of the blue.Activity Monitor may still offer a clue. By default, it shows only "My Processes," those related to your user account. To see the real picture, you need to set AM to show "All Processes" as in this view:
Click the header "%CPU" to sort by usage. Most true resource hogs are only apparent in this view. -
Macbook pro (early 2011) won't boot after sleep. Black screen with chime
I put my macbook pro early 2011 (Quad, 8 Gb RAM, 2 x SSD-disks, external 27" LED-screen) into sleep mode a couple of days ago. Everything was fine then.
However, the morning after it wouldn't wake up - this is the bootup process:
- Black screen
- Chime
- Still black screen, nothing happens.
So I've tried resetting NVRAM, SMC etc - no luck. Even tried the "Powerbutton" + "S" + Enter but to no avail.So I immediately began dd:ing my SSD-disk before trying anything else, figured it might be some preboot-corruption of some sort since I'm running FileVault2 with full AES-encryption.
Now, the problem (after some troubleshooting) doesn't seem to be disk-oriented. Remember the black screen? I've tried pulling the SATA-cables one by one on the motherboard of the Macbook pro and discovered that when I pulled the cable which reaches over the optical device (just above the SATA-cable for the optical device) then I get a white screen and I'm able to get as far as boot-option, or even disk repair (if I run my SSD-disk over USB and without any cables (three of them) attacked to the motherboard).
So since nothing works when I have disks connected or that third cable (some kind of logic board bridge? Reaches through the screen over to the other side of the mother board).
Also worth noting is that I was running out of free disk-space on my system disk. The disk is 250 Gb and free space was about 5-10 Gb (less than 5%). I also make the macbook pro dump contents of memory to disk (since my disk is encrypted it resides safely there).
So, my fear is that Apple hasn't used A-grade controllers for the disk drives (I've had drive corruption before, a Crucial 6 GB/s drive trashed less than a week before a presentation) and doesn't handle "unexpected events" nor signal/noise ratio very well. Maybe free space on disk was less than the 8 Gb needed to dump RAM (shouldn't have needed the full 8 Gb though) and this caused some kind of panic overwrite which trashed the controller?
Anyways, I've attached an image of the motherboard and I am wondering - what does the top cable which reaches over the optical drive do? Is it connected to the logic-board?sspott wrote:
** The volume Macintosh HD could not be repaired.
Looks to me like a fatal error on the hard disk. IMHO, the only solution is to boot from an external device, reformat the hard drive, and restore from backup. If you don't have a backup, you're in trouble. Boot from the external device, try to mount the int'l drive, and, if successful, back up as much as possible. Also, try running Disk Utility—it may be possible to fix it while booted from a different device, thought I wouldn't bank on it. At any rate, make sure to run an AHT afterwards, to check for possible hardware issues with the drive.
If the machine is still covered by AppleCare, take it to the store by all means. But they won't try to recover anything from the int'l drive, just check it, erase it if they don't find hardware issues, and re-install a fresh copy of the OS.
That's why you should always have at least 1 up-to-date backup (2, with one kept off-site, is better). -
What do you use to speed up final cut pro x on my macbook pro early 2011?
what do you use to speed up final cut pro x on my macbook pro early 2011?
I don't use anything to speed up FCP X on your MBP.
Seriously we need statistical info on why you think it needs speeding up.
Poor performance is often associated with incorrect usage, lots of other apps open or a hard drive that is more than 75% full or fragmented.
Ideally all the media should be stored on an external hard drive and not the MBP's. -
My Macbook Pro (Early 2011) is freezing nearly everyday?
Hi
My Macbook Pro (Early 2011, purchased at launch) is freezing nearly everyday. This problem exists for a long time (Since purchase). Whenever I let my macbook turned on, it freezes after some time. (Quite often in the night). I do not have any hardware hungry applications running. The freezes occure at normal usage. The only way to solve the freez is a complete hardreset.
I do not have any idear why this problem occures.So, here is the copy of the console...
the freeze must be happened at 06:51
31.08.11 06:46:57,734 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34817]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:46:57,735 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34817]) Exited with code: 1
31.08.11 06:46:57,735 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 06:48:37,755 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34827]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:48:37,756 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34827]) Exited with code: 1
31.08.11 06:48:37,756 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 06:49:20,362 [0x0-0xb00b].jDownloader: PreDupeChecked: no mirror found!
31.08.11 06:50:17,775 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34838]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:50:17,776 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34838]) Exited with code: 1
31.08.11 06:50:17,776 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 06:51:57,797 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34848]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:51:57,797 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34848]) Exited with code: 1
31.08.11 06:51:57,797 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 09:56:31,000 bootlog: BOOT_TIME 1314777391 0
31.08.11 09:56:50,644 fseventsd: event logs in /.fseventsd out of sync with volume. destroying old logs. (299106 18 310157)
31.08.11 09:56:51,000 kernel: PMAP: PCID enabled
31.08.11 09:56:51,000 kernel: Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
31.08.11 09:56:51,000 kernel: vm_page_bootstrap: 2003326 free pages and 77442 wired pages
31.08.11 09:56:51,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
31.08.11 09:56:51,000 kernel: zone leak detection enabled
31.08.11 09:56:51,000 kernel: standard timeslicing quantum is 10000 us
31.08.11 09:56:51,000 kernel: mig_table_max_displ = 72
31.08.11 09:56:51,000 kernel: TSC Deadline Timer supported and enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
31.08.11 09:56:51,000 kernel: calling mpo_policy_init for TMSafetyNet
31.08.11 09:56:51,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
31.08.11 09:56:51,000 kernel: calling mpo_policy_init for Sandbox
31.08.11 09:56:51,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
31.08.11 09:56:51,000 kernel: calling mpo_policy_init for Quarantine
31.08.11 09:56:51,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
31.08.11 09:56:51,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
31.08.11 09:56:51,000 kernel: The Regents of the University of California. All rights reserved.
31.08.11 09:56:51,000 kernel: MAC Framework successfully initialized
31.08.11 09:56:51,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
31.08.11 09:56:51,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
31.08.11 09:56:51,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
31.08.11 09:56:51,000 kernel: PFM64 0xf10000000, 0xf0000000
31.08.11 09:56:51,000 kernel: [ PCI configuration begin ]
31.08.11 09:56:51,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 6689
31.08.11 09:56:51,000 kernel: AppleIntelCPUPowerManagement: (built 13:08:12 Jun 18 2011) initialization complete
31.08.11 09:56:51,000 kernel: console relocated to 0xf10010000
31.08.11 09:56:51,000 kernel: PCI configuration changed (bridge=16 device=5 cardbus=0)
31.08.11 09:56:51,000 kernel: [ PCI configuration end, bridges 12 devices 18 ]
31.08.11 09:56:51,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe8919c2; max speed s800. -
I am trying to connect my MacBook Pro (early 2011 w/ Intel HD 3000/ 384Mb) to an external display with a 2560x1440 resolution. Specifically, what cable/connections do I need to display at this resolution? I cannot get the display to work using a "Thunderbolt to HDMI" or a "Thunderbolt to DVI" connector. Note: I used both older and newer (uni-directional) HDMI cables on the first config, and a Dual-link DVI cable on the second config. Apple specs state this is possible ( support.apple.com/kb/SP619 ), but I am at a loss as to how this can be done. Thanks in advance for the help!
You use a Mini DisplayPort to either HDMI or dual-link DVI adapter. If that component doesn't work, something's wrong with either the cable or something else in the connection.
(112855) -
Hi to all.
I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.
If anyone has solved such ploblem, please let me know.In reply to my own post have to say appologies to Apple whose Thunderbold port I used to blame.
Shame on me)
So, what was my problem?
Guess what?
Manhattan DisplayPort to HDMI Adapter !
The point is it's actually do only what it said to do, converts DP to HDMI.
But I for some reason thought it can be used vice versa, to be HDMI to DP converter))
I was wrong.
I bought new one HDMI to DVI adapter and now I HAVE external display!
Thunderbolt works like a charm.
So I'm very satisfied now. -
MacBook Pro Early 2011 - Airplay Mirroring only sends audio to Apple TV 2nd Gen
Ok, I'm stumped by this one. I have a 15" MBP Early 2011 edition and an Apple TV 2nd Gen. Airplay Mirroring from my MBP to Apple TV only transmits the audio -- the MBP will resize the screen like it's connected to a 16:9 device, and Apple TV will show a black screen like it's about to pick up the video signal, but no video transmits. A couple of times, video started transmitting, but it was about 30 seconds delayed (?!) and extremely choppy. Both devices are connected wirelessly to a Linksys router with 5 GHz (wireless N) capabilities. The router has been configured to Apple's recommendations for Airplay Mirroring.
A little more about my MacBook Pro:
Early 2011 Model ID: MacBookPro8,2
OS: 10.8.2 Mountain Lion
CPU: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
GPU: AMD Radeon HD 6490M, VRAM 256 MB Total
This problem is driving me crazy! Airplay works flawlessly between my iPhone 5 and Apple TV, but not with a much more powerful laptop. Also, I tried Mirroring from a friend's 13" MacBook Pro, and it did the same thing.
Any suggestions, tips, ideas, etc. to get this working is appreciated!Rudegar wrote:
your macbook dont support airplay mirror
He has an Early-2011 MacBook Pro, which does meet the requirements. The issue is that it is running OS X 10.7.5 and needs to be upgraded to Mountain Lion to use mirroring. -
Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
GreggYou should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro -
Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
GreggI have tested it with the Moshi (http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support) and Belkin (http://store.apple.com/us/product/HA342ZM/A/belkin-mini-displayport-to-hdmi-adap ter) adapters, both purchased from the Apple Store with no such luck. Have you or anyone else had success with any other third-party adapters?
-
Instant Hotspot not working on MacBook Pro Early 2011?
Hi and tnxs for reading.
I have a MacBook Pro Early 2011, and I cannot figure out how to use Instant Hotspot.
It is regularly working as standard hotspot by activating it on my iPhone and checking the iPhone WiFi Hotspot from WiFi menu, but otherwise is not available after the iPhone goes on stby...exactly as before.
Is this a limitation like the major part of Continuity?
Tnxsnot working for me either and i have iphone6 and macbook mid 2014 so it cant be a hardware problem for me at least....
-
When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 8, how can i fix this?
bootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine
Maybe you are looking for
-
How to align the components in panelGrid right?
I have a panelGrid with two column, the left column is a image and the right colum is commandLink. <h:panelGrid border="0" columns="2" width="100%" columnClasses="headerColumn1, headerColumn2"> .headerColumn1 { vertical-align: top; width: 50; .header
-
LV820 VarMgr Error 7 on close (no RT info)
Looking for suggestions regarding trouble with LV820 Variable Manager (VM) while viewing PXI RT system hosting single deployed Network Shared Variables (NSV) library. Standard LV 'Error 7 occurred at New File' (file not found) dialog appears when clo
-
Mac OS X Server and Pure-FTP: error in OS X Server Sdmin
Hi all. Recently I installed an XServe to serve different needs: It's a File service, Web service, Windows Service, Print Service AND, I supposed, a nice FTP service. Simply I had to allow few people that don't belong to the company, to "ftp's" docum
-
Consolidation Manager error INTERCOMPANY MEMBER = Third Party
Dear all, I made a little changing from the IFRS starter kit like the print screen below in the Dimension Scope. After that i tried to run the Ownership Manager as follow Any idea with this error? Regards George
-
Throws WebDynpro Exception in adobe form
Hello Experts I am new to adobe form i created an adobe form when i run it as webdynpro application it gives run time error. Error when processing your request What has happened? The URL http://******************/sap/bc/webdynpro/sap/zadobe/ was not