Why is my macbook pro hanging on shutdown?

Hi,
     For the last few weeks my MBP has been hanging at shutdown or restart on the gray screen with the grey loading wheel. I tried leaving it on this stage for a day with an outcome of it still hanging.
      I read a thread on apple support that mentioned the same problem with a solution of uninstalling kaspersky anit virus which i had quite recently installed myself but after uninstalling the problem ceased for just one shutdown cycle.
     Additionally, I am able to shutdown or restart at the login screen and I have tried shutting down with the "reopen windows when logging back in" box both checked and unchecked and with windows open or closed of multiple programs.
     The list of programs currently installed are: Parellels Desktop (with windows 7 proffesional with every default installed windows program), memorex expressit label design studio for windows (the only non default windows program installed on my computer), Adobe CS5.5 Master Collection, Microsoft Office 2011 for mac os, Mozilla Firefox, Google Chrome, the Messages beta, Vuze, Tuneup, iBooks author, HP photosmart printer (and extensions), Adobe AIR and flash, and every default program that comes pre-installed on the late 2011 macbook pro. Every one of these programs is fully updated.
Please Help:)

Boot into the Lion Recovery disk (command-r) and select Disk Utility. Then run Repair Disk.

Similar Messages

Why does my macbook pro retina display shutdown while entering the administer account

why does my macbook pro retina display shutdown while entering the administer account

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I have two wireless networks that I switch back and forth. Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart. What is the fix?

I have two wireless networks that I switch back and forth. Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart. What is the fix?

Create two locations in Network, one for one and one for the other.
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

Why Does Retina MacBook Pro (2012) Suddenly Hibernate With Lid Open?

I'd like to know why my Retina MacBook Pro (2012) at certain times suddenly go into Hibernate mode when I'm actively using it with the lid open and what I can do to prevent this.
I know this is hibernate because of what I see in the Console logs and the fact that I can't trigger a wake by using the keyboard/trackpad/mouse. Only the power button causes it to wake up.
This usually happens when I wake it from sleep and plug it into an external monitor via HDMI to HDMI connection.   The lid is open and I use both displays.    This happens about 30 seconds to a minute after I wake from sleep. At the time I'm not plugged into the power supply because I believe it's generally a good idea to let the batter drain and the recharge it. The last time this happened it was about 35% to 40% charged.
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro10,1
Processor Name:    Intel Core i7
Processor Speed:    2.6 GHz
Number of Processors:    1
Total Number of Cores:    4
L2 Cache (per Core):    256 KB
L3 Cache:    6 MB
Memory:    8 GB
Software:
OS X Yosemite (all latest updates installed)
{some 3rd party software}
Let me know if you need more information.
For the gory details of what I see in system.log, read on:
This is about the time the hibernate happens. I've replaced my laptop's name with {COMPUTER NAME}
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: notification observer: com.apple.iChat   notification: __CFNotification 0x7f87d5210a90 {name = _NSDoNotDisturbEnabledNotification}
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:    NC Disabled: NO
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:   DND Enabled: YES
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: Updating enabled: NO   (Topics: (null))
Mar 20 18:29:26 {COMPUTER NAME} WindowServer[218]: device_generate_desktop_screenshot: authw 0x7fba81c2e940(2000), shield 0x7fba81c35bd0(2001)
Mar 20 18:29:27 --- last message repeated 1 time ---
Mar 20 18:29:27 {COMPUTER NAME} WindowServer[218]: device_generate_lock_screen_screenshot: authw 0x7fba81c2e940(2000)[0, 0, 1920, 1080] shield 0x7fba81c35bd0(2001), dev [1920,1080]
Mar 20 18:29:27 {COMPUTER NAME} com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.user.502): Service "com.apple.xpc.launchd.unmanaged.loginwindow.72" tried to hijack endpoint "com.apple.tsm.uiserver" from owner: com.apple.SystemUIServer.agent
Mar 20 18:29:30 --- last message repeated 1 time ---
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: PM response took 4741 ms (30, powerd)
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007298: AirPort_Brcm43xx::powerChange: System Sleep
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007302: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1b014fb000, 0x19000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0xd8ec7000, 0x19000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1369ac0000, 0xe000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x0, 0x0]
Mar 20 18:29:31 {COMPUTER NAME} kernel[0]: hibernate image path: /var/vm/sleepimage
And when I wake it up by repeatedly pressing the power button:
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_newruntime_map time: 0 ms, IOHibernatePollerOpen(), ml_get_interrupts_enabled 0
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: IOHibernatePollerOpen(0) 19 ms
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init reading
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: PMStats: Hibernate read took 355 ms
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init pagesDone 212628 sum2 2c66736a, time: 355 ms, disk(0x20000) 447 Mb/s, comp bytes: 57749504 time: 55 ms 985 Mb/s, crypt bytes: 157388800 time: 67 ms 2228 Mb/s
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Wake reason: EC.PowerButton (User)
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: vm_compressor_fastwake_warmup (7450 - 12878) - starting
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous sleep cause: -60
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous shutdown cause: 5
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 0 us

This happened again at about 31% power, again unplugged.   Previously, I had plugged in the power before pressing the power button, but this time I pressed the power button before plugging in. The display showed me the out of power icon. Only on plugging it back in was I able to power up the laptop again.
Is it possible there's a bug either with the displayed power or how remaining power is detected?

Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

Hmm, good luck then!
I'm pretty much exactly on the opposite side of the planet, but I've been to Vermont and remember its rural beauty well. However, I can't imagine you having the only Internet connection within a reasonable radius (where "neighbors" hanging off the same ISP don't count). Uh, that note only if your wired connection to the router produces no good result, either...

Why does my Macbook Pro destabilize after hibernation sleep?

Over the last several months using Mountain Lion, I decided to completely drain my battery to reset it. I think it then goes into what is called hibernation or emergency sleep mode. I am usually unable to wake it from sleep prompting a forced resstart.
to restart, I connect the adapter and the light goes green quickly changing to amber as expected. After the restart, however, some top menu items are missing such as the wi-fi icon and the Lock Keychain icon. All third party icons display correctkly. The space is there but blank and I can access the pulldown menu by clicking in those blank areas.. When double clicking the HD icon in the Finder, no icons show on the left side any more. A restart does not fix the problem. The system then eventually destabilizes to the point that I have to restore from my Firewire external HD clone using SuperDuper. One time I did a full restore (that takes forever even with a very fast wi-fi set up) to fix the problem.
I am usually in Safari or playing a Game such as a third party card game application to pass the time until the battery completely drains. I also have Filevault enabled.
Why is the MacBook Pro battery reset causing this OS instability? How can I reset the battery without encountering these sleep issues?

Thank you Dale.
This article mentions that recalibration should be done every two months. I think I waited 4-6 months before doing a recalibration on purpose. Though I probably ran out the battery power before then recharging overnight (some commenters on Apple Discussions said to wait 5 hours before recharging!).
I think that my battery goes into a forced shutdown rather than true sleep. Your linked thread states that this often causes directory damage. But I ran DiskWarrior and Disk Utility immediately after the stated problems occurred. And these programs pretty much repair any directory damage. But they failed to correct the problems I listed in my original post.
So I question the conclusion that not calibrating every two months caused irreparable directory damage that even DiskWarrior or Disk Utility cannot repair. The damage appears more extensive than this in my opinion.
The battery is only a year old with 92.35% of its original current capacity and 537 cycles. The current charge is over 6350 at 99.47%. It will eventually go to 100%. I can run over 4 hours of normal usage on a single battery charge.
Side note -- to my knowledge, nothing in the original MacBook Pro manual suggests that the battery requires regular recalibration of any kind to maintain the integrity of the battery. Much less every two months. If this is a requirement or even highly recommended, then Apple has done a good job hiding this information. And the available recalibration information varies from one type of battery to the next and is often inconsistent.
Apple's comments in the past support the idea that recalibration improves efficiency and fixes some battery issues as they occur, but that it is not manditory to maintain the health of the battery.
Do you have an official battery recalibration source (preferably Apple) that indicates regular battery recalibration is crucial and exactly how this must be done for MacBooks with builtin batteries?

WHY does my Macbook Pro (mid 2012) always slow to crawl when I wake it up and go online???

I wake up my Macbook Pro (sweetly tell it that I love it)
click on one of the 1-10 tabs I have open in Firefox or Safari
Click on iTunes (open already) to play some tunes
Wait
Wait while the little ball spins as my browser thinks
wait a bit more
finally the tab I click on comes to the front, but the page takes 15-60 seconds to load
I proceed feeling irritated
A little help?
Specs:
15" Mid 2012 Macbook Pro
2.3ghz Intel Core i7 Processor
500gb HD
4gb RAM
Etc.
Apps that I am using:
Safari
Firefox
iTunes
Adobe Illustrator (occasionally)
Lightroom 4 (occasionally)
Why oh why must my Macbook Pro drive me insane by getting hung up for minutes on end???

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Why does my MacBook Pro and Mac Pro keep freezing?

Why does my MacBook Pro freeze?
MacBook Pro
2.4 GHz intel Core2 Duo
4BB 1067 MHz DDR3
OSX 10.6.8 Snow Leopard
I turned it on and I went to safari to look things up. Safari froze and then the whole thing became unresponsive - the mouse could move the cursor but it couldn't open any programmes.
Tried safe boot several times. No help.
Tried to repair disc permissions. The first time it got a little way then said 'user stopped repair' or something - though I didn't touch it. Tried again it got all the way through and said 'repairs complete'. But no help.
Couldn't clear cache etc as couldn't get to the relevant part to do it.
Opened in single user mode. Ran the fsck -fy thing twice. First time it said both “The volume appears to be OK” AND “FILE SYSTEM WAS MODIFIED.” In 2nd run it just said “The volume appears to be OK”. No help.
Booted it up from the Superduper bootable backup version on a USB external drive. It seemed to boot up ok but then tried to click on something and the same thing happened - spinning beach ball and it just hung.
Erased hard drive and reinstalled snow leopard but it just does the same thing. Suggesting a hardware issue not software but...the Eerie thing is, we tried backup version on boyfriends Mac Pro and it worked fine on there but 24hrs later his Mac Pro has got exactly the same screen freezing, unresponsive issue. Could this suggest there's something evil lurking on my back up? Can't get an appointment at Genius Bar until next week and need to get some work done, so hoping someone might have some ideas?
Cheers
Kerry

KaiDonald wrote:
... does Apple products work much better with using Apple routers?
While a genuine Apple router is likely to result in success, the reason for having one instead of another product is that it eliminates a lot of uncertainty. For example, we do not know the model D-Link product you have so no one is in position to speculate what the problem might be. Also, it makes support on this forum easier since there are only three AirPort models to choose from and they all work more or less the same.
Generally speaking your iPods, iPads, MacBooks, and AppleTV ought to work with any router though, provided it is fairly recent and meets accepted industry standards. If in doubt you can purchase an AirPort Base Station, which comes with 90 days of free telephone support. If it does not result in any improvement for you, you can always return it for a complete refund. The return period is 14 days and be sure to keep all material - receipt, box, manuals, etc...
If you elect this option be sure to follow its installation instructions, the most important of which is to power down your modem prior to connecting the AirPort Extreme, Express, or Time Capsule. All your other equipment will need their network settings adjusted to "forget" the D-Link network and connect to the new one.

Why does my MacBook Pro make background music and video quieter when I am on FaceTime?

Why does my MacBook Pro make background music and video quieter when I am on FaceTime? When my girlfriend and I are trying to watch a movie on Netflix together while on FaceTime my MacBook Pro always decreases the volume of any background sound on my computer so I can barely hear it. Is there a way to fix this? Thank you!

Have the same issue too. Apple can you please change this annoying feature. You are making long distance relationships more difficult.
I like how Facetime was with the old iOS, where nothing was dimmed. OR at least maybe if you could give users the option to turn on or off dimming of facetime.

Why does my macbook pro "goes to sleep" when charging?

Why does my macbook pro "goes to sleep" when charging? It is working fine without charging but once I attach the charger to my laptop, it just blacks out or goes to sleep mode and I can't wake it up unless I unpluck the charger.
I read from threads that it is a logic board problem....How do I solve this problem?

Try an SMC reset. Follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

Why does my macbook pro get hot

Why does my Macbook pro get hot while I am only on my email account? This is a recent change. It gets too hot too put in my lap. Is it a battery issue.

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

Why do my macbook pro mid-2012 stop searching the web page?, why do my macbook pro mid-2012 stop searching the web page?, why do my macbook pro mid-2012 stop searching the web page?

i dont know why but my macbook pro just stop to open a web page and frezee there im very nervios obut somthing that can be...... help me please.
it is brand new like 10 days

A new Mac comes with 90 days of free tech support from AppleCare.
You can return / exchange a Mac within 14 days of purchase.
Do not be nervous.
AppleCare: 1-800-275-2273
Best.

Why is my Macbook pro display text background yellow instead of white?

Why is my Macbook pro display text background yellow instead of white? This problem is intermitten and when it occurs the yellow tint flickers.

Same my Mac book pro problem please solved My MacBook Pro went to sleep mode (I used Energy Saver, let my MacBook Pro to sleep mode when inactive for 2 minutes). I rubbed TrackPad to let MacBook Pro awake. But I was shocked that my screen is mirrored (Look fourth photo). So I put MacBook Pro to sleep mode again and awake it, display appeared (Look fifth photo). So I turned off and turned on, display appeared (Look sixth photo). I turned off five times and turned on five times, display appear normal screen size.
I didn't use MacBook Pro for 2 days until today, I want install The Sims 3 World Adventure, Fast Lane Stuff and High-End Tech. I just turn on my MacBook Pro, display appeared (First to third photos). I tried same method as 22 June, but still never work as normal display. How can I fix it?
MacBook Pro 13" Late 2011
2.4GHz i5
4GB
500GB HDD
Thanks for help me.

Why is the MacBook Pro no longer available in a 17" screen?

Why is the MacBook Pro no longer available in a 17" screen?

No one here knows why Apple decided to discontinue the 17" screen. This is a user to user community. Click on the Contact Us link at the bottom of this website. Write a letter to Apple & ask them. If they respond please post it.

Macbook pro hang during operation

last month after putting a flash memory on USB port, my Macbook pro hanged completely and no solution except restart. after that day by day it slowed down in opening of application and operations. these days its very slow and hang several times during operation of an application.
The OS X is 10.9.3, memory is 8 GB, around 70% of hard space is free.
Can someone help me to find the problem and fix it ?
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/, /\'$'\n''/g;p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get path of every login item'" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why is my macbook pro hanging on shutdown?

Similar Messages

Maybe you are looking for