Why is my MacBook Pro very slow after installing Mountain Lion 10.8.5. - Solutions?

Hello, hello
After waiting quite a while - I paid the relatively small amount, and got myselves a new OS.
But I am very disappointed of the speed - I see that this also was a problem with OS Lion?
Please assist me. Perhaps others have this problem as well?
Some info:
- 2,66 GHz Intel Core i7 processor
- 4 GB 1067 MHz DDR3
Also
- Sometimes I run the Parallels Desktop 6 and 9 software, does this affect specs of the new OS?
Hope to hear from you guys.
Sincerely,
Harald

With only 4GB of RAM, how much do you have devoted to the virtual machine running under Parallels? Even if it's a small amount, it's going to make page outs and swaps used very high. From my perspective, 8GB of RAM is the 'sweet spot' for running Mountain Lion.
I'm assuming that you've a 15" mid-2010 MacBook Pro? If so, you can speed things up by installing the maximum 8GB of RAM. Go RAM shopping at Crucial or OWC.
Other than upgrading your RAM, the only thing that you can do to speed up your machine is to install a SSD. You can also check the SSDs at Crucial and OWC and decide if one is right for you.
Clinton

Similar Messages

  • Why is my Macbook Pro very sluggish after the Mountain Lion update?

    It's quite frustrating being as this is my first Apple laptop. I figured that it would be easy to update these things.
    I was using the prior OS and it worked just fine. Now my Macbook is just as slow as the HP laptop that I had to retire.
    I'm using OS X Version 10.8.1
    Processor: 2.3 GHz Intel Core i5
    Memory: 4 GB 1333 MHz DDR3

    With only 4GB of RAM, how much do you have devoted to the virtual machine running under Parallels? Even if it's a small amount, it's going to make page outs and swaps used very high. From my perspective, 8GB of RAM is the 'sweet spot' for running Mountain Lion.
    I'm assuming that you've a 15" mid-2010 MacBook Pro? If so, you can speed things up by installing the maximum 8GB of RAM. Go RAM shopping at Crucial or OWC.
    Other than upgrading your RAM, the only thing that you can do to speed up your machine is to install a SSD. You can also check the SSDs at Crucial and OWC and decide if one is right for you.
    Clinton

  • My macbook pro is very slow after installing mountain lion

    my macbook pro is very slow after installing mountain lion?  Is anyone else having this issue?

    If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
    one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
    If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
    the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
    You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
    There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
    You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
    Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
    Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD

  • My wifi is very slow after installing mountain lion on my Mac book pro

    My wifi is very very slow after installing mountain lion on my MacBook pro.
    What can I do?

    Ha  ha, I misread that as "My wife is very slow after installing mountain lion on my Mac book pro"
    BTW on my MBPro (late 2009 with max RAM) Mountain Lion runs very well with no slowing down.

  • Why is my MacBook Pro so slow after installing Yosemite?

    Hello,
    I've noticed since i upgrade my macbook pro from maverick to Yosemite it slowed my computer down for almost every thing .it become unusable ,can’t do anything without rainbow wheel appearing . Need help plz
    MacBook Pro (Mid 2010)
    processor 2.66 GHz Intel Core 2 Duo
    memory 4 GB
    Etrecheck report:
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro7,1
        1 2.66 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 1019
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1510) - Time since boot: 2 days 23:59:4
    Disk Information: ℹ️
        Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 319.21 GB (174.19 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Adware: ℹ️
        Conduit [Adware! - Remove]
    Kernel Extensions: ℹ️
            /Library/Application Support/MacKeeper/AntiVirus.app
        [not loaded]    com.zeobit.kext.AVKauth (1.0 - SDK 10.7) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.driver.JRDMassStorageDriver64 (1.0.0) [Click for support]
        [not loaded]    com.driver.JRDMassStorageDriverType05 (1.0.0) [Click for support]
        [not loaded]    com.driver.JRDUSBModemData32 (1.0.0) [Click for support]
        [not loaded]    com.driver.JRDUSBModemData64 (4.0.5) [Click for support]
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.64) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.64) [Click for support]
        [not loaded]    com.wdc.driver.1394HP (1.0.6) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.4) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        7 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    com.apple.xpc.smd.plist
        5 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.conduit.loader.agent.plist [Adware! - Remove]
        [failed]    com.divx.dms.agent.plist [Click for support]
        [loaded]    com.divx.update.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.rim.BBLaunchAgent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.rim.BBDaemon.plist [Click for support]
        [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    .dat00e0.576 (hidden) [Click for support]
            /usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
        [loaded]    .dat00f4.77a (hidden) [Click for support]
            /usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
        [loaded]    .dat0171.6b1 (hidden) [Click for support]
            /usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    User Login Items: ℹ️
        uTorrent    Application  (/Applications/uTorrent.app)
    Internet Plug-ins: ℹ️
        OVSHelper: Version: 1.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.1.2 [Click for support]
        Unity Web Player: Version: UnityPlayer version 3.5.0f6 - SDK 10.6 [Click for support]
        RealPlayer Plugin: Version: Unknown [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0
        SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Silverlight: Version: 4.0.60531.0 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    Safari Extensions: ℹ️
        AdBlock
        SaveFrom.net helper
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Java  [Click for support]
        Perian  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            10%    WindowServer
             9%    Folder Actions Dispatcher
             8%    uTorrent
             5%    launchd
             2%    coreservicesd
    Top Processes by Memory: ℹ️
        417 MB    Folder Actions Dispatcher
        64 MB    Safari
        52 MB    Pages
        43 MB    WindowServer
        39 MB    uTorrent
    Virtual Memory Information: ℹ️
        38 MB    Free RAM
        846 MB    Active RAM
        791 MB    Inactive RAM
        747 MB    Wired RAM
        10.64 GB    Page-ins
        435 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 13, 2015, 12:53:00 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Safari_2015-03-13-125300_[reda cted].crash
        Mar 10, 2015, 07:41:56 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/DivXMediaServer_2015-03-10-194 156_[redacted].crash

    Well, for one thing, you need to get rid of this a it does more harm than good:
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    as well as this adware:
    [running]    com.conduit.loader.agent.plist [Adware! - Remove]
    You can use either the manual method or download the app to do it for you:
    http://www.thesafemac.com/arg/
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    If your system is still sluggish after ridding your computer of these unwanted things, then consider installing additional RAM - 4 GB is considered the absolute minimum to run Yosemite.

  • My macbook pro runs slow after install of lion

    i was wondering if anyone is having any issues after installing lion and doing the 10.7.3 update? i noticed a slow performance after i did the  update. i also added 8 gigs of memory hoping this would help, but it didnt i also formatted the drive install snow leo and my boot time was 2 minutes i upgraded to lion and my boot time jumps to 6 plus minutes. i have run the disk permission finds some problems then repair but still my macbook runs slow HELP ME!!!!!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the time of the most recent boot when you had the problem. Post the messages logged during the time when you had the problem – the text, please, not a screenshot. For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time. If the problem is a crash or a shutdown hang, post the messages from before the boot time, when the system was about to crash or was failing to shut down.
    Edit out excessive repeats and personal information, if any.
    If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search the archived log, and if necessary the older ones below them, for the same information.
    Step 2
    Do the same with kernel.log.
    Step 3
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please do not post shutdownStall or hang logs – they're very long and not helpful.

  • Why is my Macbook Pro running slow after I downloaded the new Lion software? I have a 2.26 GHz intel core 2 duo? whats Wrong?

    Why is my Macbook Pro running slow after I downloaded the new Lion software? I have a 2.26 GHz intel core 2 duo? whats Wrong?

    Spotlight may be indexing your drive(s).  Click the Spotlight icon at the right of your menubar; if it shows things being indexed, that's at least some of the reason. 

  • HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.

    Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.

    Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.

  • MacBook Air late 2010 very hot after installing Mountain Lion? Can i back to Lion?

    My MacBook Air, late 2010, is very hot and the vans are going too speedy after installing Mountain Lion. Can I deinstalling Mountain Lion and returno to Lion? What are the steps for this deinstallation? Thank you.

    Technically, there is a way, but it is definitely not something I would recommend, as downgrading isn't usually supported/encouraged.
    I found a website that has instructions but it clearly states it's not for the inexpert, so proceed at your own risk.  Also, I don't think you can download Lion from the AppStore anymore?

  • Why is my macbook pro running slow after os x yosemite upgrade

    Why is my macbook pro running so slow after os x yosemite upgrade

    Please describe the problem in as much relevant detail as possible. The better your description, the better the chance of a solution.
    For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

  • MacBook Pro is slow after install new OS X Yosemite

    My macbook pro is freezing after I installed
    Yosemite
    What to do?

    Hi brn2win67,
    Thanks for using the Apple Support Communities. I understand that you are experiencing performance issues with your MacBook Pro after installing OS X Yosemite. The following resource provides information if your mac runs slowly:
    OS X Yosemite: If your Mac runs slowly
    http://support.apple.com/kb/PH19031
    - Matt M.

  • Black screen on MacBook Pro Retina Display after installing Moutain Lion. Need Help!

    My macbook pro (retina) screen went black after I installed Mountain Lion.
    I got a HDMI cable to another monitor and the image worked nicely there.
    But i cant get it back on my MacBook Pro! I tried taking out the HDMI cable, restarting, searching on settings configs..
    What should I do?
    Are there any drivers i should install to get image back on my MacBook Pro Retina Display?
    Has this happened to anyone else?
    Thanks in advance for all the help.

    That helped me finding other people with similar problems.
    But there is a major difference!
    -They have a black screen after they login.
    -My screen is black NOW! And I'm only using my BRAND NEW rmbp with the HDMI cable to my TV!
    This isnt good at all and I would like to solve it asap..
    I tried reinstalling Mountain Lion, taking out the hdmi cable and rebooting many times.
    Until now, nothing!
    Is my screen broken or maybe my video card has some problems?
    I hope not! I just traveled from the US to Brazil and I dont want to search for an Apple Store here.
    Any tips or ideas are welcome, thank you.

  • Safari runs slow after installing mountain lion

    Safari is running very slowly since I installed Mountain Lion.  Any suggestions about why this is happening or how to improve the speed?

    I ordered something from a website I haven't used before, and it was very slow, but I don't know if it's that website or safari.  Safari is the only browser I use.

  • Macbook randomly shuts down after installing Mountain Lion.

    I have a late 2008 Aluminum Macbook; as of last week I have installed Mountain Lion finally and I've come across a rather irritating problem: the laptop keeps randomly shutting down. I've noticed it primarily likes to go down when the battery is at 89%. I've never had battery trouble before, this happens even when the computer is not over-heating, so I'm fairly certain it's not a battery issue. After restarting the computer all the applications I was using are still open and any progression I had made on documents have been saved since the time of the crash.
    I'm really at a loss as to what's going on with this. Has anyone experienced something like this or have any suggestions as to how to fix this?

    Hi ppl again :)
    I found that screen is not disabled, it is only have a very low brightness. So I begin to wait because I saw that actually installer is still running. Finally, Mas OS was installed and after that I change brightness using keyboard (it didn't worked while installation). Now all is ok. I also tried to reboot and system loaded correctly.
    I hope this will help. Unfortunatelly Apple support was unable to help me by a phone call.
    Have a nice day!

  • Bad Battery life Mac Book pro 13 inch after installing mountain lion?

    My battery runs out of juice very quickly after installing lion + for the first time I can hear the fan. So the machine seems  to be working hard?!
    Anyone a clue?
    Erik

    Add your name to the list - https://discussions.apple.com/thread/4135250?tstart=0.
    Sorry,
    Clinton

Maybe you are looking for

  • My css refuses to show in DW CS3 and I want to know to fix it!

    for the love of pete my homies! help me out here! I am using a ridiculous school computer that refuses to cooperate and it has taken one of my joyful little toys away... being able to see the css styles in the design and split views... HOW THE HELL D

  • How to markup a layout so each area is exported as a different page on the pdf using the crop and bleeds

    Hi, I work in the sign industry and I am looking at a way to streamline our preprint setup for artworks the issue is that we will get an artwork that is 6m x 2m. This is to big to do in one print so we will chop it into 2-3 pieces and then print thos

  • Using the OIM logger in a Pre-populate adapter

    I am having problems getting the logger to show any output from my java code. This same logic works for a scheduled task, but not in a pre-populate adapter. I am even trying to use a logging class that I see is already in the logs. Code snippet: impo

  • Columns in a 2way Mirror Storage Space

    Hi I have a similar question like J_Rod: http://social.technet.microsoft.com/Forums/en-US/7a37e6ed-7e22-485c-a5d1-6460b2c4d63b/mimicing-raid-10-resiliency-with-storage-spaces?forum=windowsserverpreview Why should I consider using more than 2 Columns

  • Error 8 when compiling the upload program

    When loading data to the Infocube it gives the following error "Error 8 when compiling the upload 227, message: Data type /BIC/CCFBZ found in a ne   "                  It doesnot go any further from thr infopackage also..