Why is my Macbook so slow, loud & hot even after upgrades?

I upgraded my Macbook a bit over a year ago with a Crucial m4 256 gb SSD, plus 8 gb of RAM compared to the old 250 gb hard drive and 2 gb of RAM. The extra RAM was just for some apps and games, and the SSD was supposed to make the computer silent and cool. At first the system improved a lot, from startup times to overall performance, but ever since this summer, and especially this fall after upgrading to Mavericks, the performance has slumped quite drastically (might even be worse than before the upgrades). Also, there seems to be a lot more RAM usage than there used to be, although I hardly ever run more than two applications at once (iTunes and Google Chrome). Is it the processor (2.4 gigahertz Intel Core 2 Duo), the new RAM, the new SSD, or the new OS/other programs?

I upgraded my Macbook a bit over a year ago with a Crucial m4 256 gb SSD, plus 8 gb of RAM compared to the old 250 gb hard drive and 2 gb of RAM. The extra RAM was just for some apps and games, and the SSD was supposed to make the computer silent and cool. At first the system improved a lot, from startup times to overall performance, but ever since this summer, and especially this fall after upgrading to Mavericks, the performance has slumped quite drastically (might even be worse than before the upgrades). Also, there seems to be a lot more RAM usage than there used to be, although I hardly ever run more than two applications at once (iTunes and Google Chrome). Is it the processor (2.4 gigahertz Intel Core 2 Duo), the new RAM, the new SSD, or the new OS/other programs?

Similar Messages

  • Why is my macbook air getting so hot, fan running, and burning through the battery fast?

    why is my macbook air getting so hot, fan running, and burning through the battery fast?

    I have started to experience my computer getting really hot also. Since one month back in time it has started to get raging hot (up to 99 degrees celsius) just by surfing the internet. Sometimes it stays that hot but most of the time the temperature gets lower after about 15 minutes..
    this has never happend before and i am starting to get worried..
    what is the problem and is there a sollution??

  • Why is my Macbook Pro slow to wake after sleep?

    Why is my Macbook Pro slow to wake after sleep?

    I am having the same issue. I hook it up to the charger in the evening and close the lid. When I go to use it the next time it takes a good 30 seconds or so to wake up. The screen shows the log in screen but typing doesn't work and the cursor is frozen. Sometimes it will even give the rainbow wheel for the cursor, so it seem like it is processing whatever to get going. I also notice that my battery won't be fully charged at anywhere from 95%-99% after being charged a full evening. What can I do to change whatever is happening because it is pretty crappy to charge it all night expecting to have a full battery for the next use, plus the issue of having to sit there waiting for it to boot every time.

  • Why is my MacBook Pro slow? Beach ball

    Boy, I was looking at a discussion of this from TODAY, about a half hour ago, and now can't find it.
    "Why is my MacBook Pro slow?" brings "screen tearing issue" and other things not related to my problem.
    I got and ran Easyfind, and got rid of MacKeeper.
    What else do I need to do?
    I have the beach ball way too often.
    I just made an iMovie, but optimizing it for YouTube is impossible.  Boxes keep getting grayed out; complete hangup.
    Can easyfind help further?
    Thank you.

    Hi Tomo 2,
    Kim Komando said get Sophos, so I did.  I see it found something called Bredo-K on Nov. 22.
    It's now scanning my OVER 5 MILLION FILES.  Seriously, I don't think I need that many.
    Right now about 50% of CPU idle,
    about 1.03 GB Ram free. 
    Sophos is using about 90% of whatever.
    This scanning could take all weekend.  I need to get rid of some stuff.  Hard to know what, though.
    Thanks for any more ideas.
    Jerry

  • Why is my Macbook so slow to open?

    Why is my MacBook so slow to start up? I've recently cleared more space on the start-up disk (currently has 49GB of the 74GB capacity), but it still takes about 2 minutes to start up from cold. Any suggestions?

    Hi Stevie,
    several thing could caused that, like a lot of application that need to be opened during start up, your default boot up destination is not your internal HD (so it will try to look to optical first, "clogged HD", etc.
    Try to optimize and repair permission in your macbook HD using ONYX or MAcHelpMate,
    http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
    http://www.apple.com/downloads/macosx/systemdiskutilities/machelpmate.html
    Try to reset PRAM:
    http://docs.info.apple.com/article.html?artnum=2238
    Open system preference: account : Login item and uncheck application that you don't want to start automatically.
    Good Luck

  • Why is my MacBook really slow since uploading Yosemite

    Why is my MacBook really slow since installing Yosemite?

    If you have less than 4 GB of memory (not 8 GB) as shown in the About This Mac window, Yosemite won't perform well. Otherwise, see below.
    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My macbook pro get very hot when i upgrade it to lion osx, what is the solution?.

    my macbook pro get very hot when i upgrade it to lion osx,and the fans are running very fast; what is the solution?.

    it says user 31%; system 40%; idle 29%; and it's changing rapidly;
    is that what you looking for? pls. expalin more and thnx for trying helping .

  • Why does my iphone 4s gets really hot even though im not using it, battery drain's 2% every 5 minutes.. and its just in my pocket,. what will i do?

    why does my iphone 4s gets really hot even though im not using it, battery drain's 2% every 5 minutes.. and its just in my pocket,. what will i do?

    some thing is runnng in the back ground. Or your email is struck. Deleted all emails and reboot phone and add them one by one. Or your sim cards has problem. Replace sim card. If nothing works drain battery then recharge battery to 100% full charge.

  • MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

    MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
    This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
    After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
    Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
    1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
    2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
    sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
    This will allow you to simply type “airport” in the terminal window to execute the command.
    Type airport –s
    This will display all the networks in your area and what channel they are broadcasting on.
    3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
    The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
    4.) Boot your Mac into safe mode by holding down the shift key while booting.
    5.) Open System Preferences and Click on Network.
    6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
    7.) Create a new location by clicking the + and give it a new name.
    8.) Delete the old location by clicking on the old locations name and click the – to remove.
    9.) Reboot
    10.) Open System Preference and click on Network.
    11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
    12.) Drag Airport to the top of the list of devices then click Ok.
    Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
    13.) Click on Advanced under Network.
    14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
    15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
    16.) Click on the drop down for Configure IPv6 and change it to Off.
    17.) Next click on the DNS tab at the top.
    18.) Click the + to add a DNS Record.
    To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
    Then Type cat /etc/resolv.conf
    (There is a space between cat and /. Without it you’ll get no such file or directory.)
    This should return two addresses. Your ISP’s DNS Servers.
    19.) Add both records to the DNS and click Ok.
    20.) Click Ok then under Network Click Ok.
    21.) Reboot router then Mac
    22.) Fixed my connection issue
    The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
    I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
    Let me know if this helps or if you have any questions.
    Best of luck.
    Message was edited by: erockdabass
    Message was edited by: erockdabass

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

  • Why I am facing signal problem in my 4s after upgrade to os 5.0.1

    Why I am facing signal problem in my 4s after upgrade to os 5.0.1 and how can I solve it

    Hi, i also got the same problem. pls let me know if there any luck.
    01738855651
    Tusher
    Thanks Man

  • Why can't I use effects on camera even after I upgraded to 5.1?

    Why can't I use effects on camera even after I upgraded to 5.1?

    What effects are you referring to?

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Why is my iphone 4 not turning on, even after hours of charge?

    Why is my iphone 4 not turning on even after hours of charge?

    Try holding both the home and power buttons at the same time until the Apple boot logo appears. If it doesn't appear after 15 seconds, this probably won't work.

  • Typing has become slow in ipad mini after upgrade to Io7

    typing has become slow in ipad mini after upgrade to io7.
    everywhere in Browsers, mail & everywhr.

    Reset all settings
    Settings>General>Reset>Reset All Settings

Maybe you are looking for

  • Can no longer play music through my car

    I recently purchased a 2010 Cadillac SRX. It had a specific usb for an ipod. I would connect my iphone through this port and it would come up on the pop up display and allow me to selcet songs, etc. Now I decided to update my firmware to 4.0.1 and tr

  • How to get the current node element by its value?

    e.g,: wdContext.current<b>Deal</b>Element().setAttributeValue("<i>deal_id</i>","<i>aaaaaaa</i>"); above code can get the result i wanna. but now i wanna in terms of its node'name to  set attribute vaue of itself. in other words,i have no idea about h

  • Problems with query on a DB using NetBeans Tomcat and MySql

    hi, I've wrote a servlet that receive uername and password from a jsp. By quering to the db the servlet verify if that user is present on the db. I've notice no errors, hovever the page displayed is the same even if the user is present on db or isn't

  • How to hide the default arrow icon of af:tree node

    Hi All, I am using Oracle JDeveloper 11g R2. I want to hide the arrow icon which is displayed by default with af:tree node. The use case is to display custom icons for all the nodes. The problem is that when I am customizing icons of tree node, it is

  • What tables are using in backend to store sxmb_moni messgaes

    Hi experts, I want to know what are the tables used in back end to display messages in sxmb_moni. I am preparing a report to send alerts to few people based on the status of the messages in the pipeline or which are failed and showing as failed messa