Why is my midi data not showing up on Logic Pro X?

So i've been working on this project for a while now and for some reason out of no where the midi data is not showing up. every time i click on a region, it doesn't open up the midi data for that track, but instead only opens up the data for a different track. No matter what region i try to open, it always goes to that one specific region, and if i try to click in notes it only puts them in on that region. furthermoer, the MIDI draw refuses to work. it will not let me pitch bend, change note velocities, or anything. Am i missing something obvious or what?? please help, this is one of my favorite projects so far and I don't want to trash it because i can't do anything with it.

Just happened to me. Then realized that I had clicked the "link" button off in the Piano Roll Editor and clicking it back on fixed it.

Similar Messages

Why is my MIDI keyboard not showing up in 'MIDI inputs detected'?

Neither of my MIDI keyboards show up in 'MIDI inputs detected' in Garageband for my iMac. They both work in my older macbook, and the USB inputs in my iMac work fine for external hard drives and keyboards. The iMac even powers them, lighting the screen on the keyboard, but fails to recognise it in Garageband.Please help.

Yamaha driver:
http://download.yamaha.com/usb_midi/index.html
M-Audio driver:
http://www.m-audio.com/index.php?do=support&tab=driver

Blue Icicle XLR to USB adapter is not showing up on Logic Pro or Macbook Pro.

I've tried Aggregating it in the settings but there's no Microphone or Icicle even showing up. It's Glowing and I've tried the mic with an alternative interface so I know it works. Also there is no Driver for the product it is supposed to be plug and play. There's no manual either, so troubleshooting is out the door.
Please help!
I'm using a Yeti Bluebird Mic with the Blue Icicle yet they are nowhere to be found!
Here is a screenshot of both:
Please help this is so frustrating

Previous? But is is selected as both in- and output...? ...and that can only be if it is plugged in...
same goes for your Icicle... it doesn't show up if it's not plugged in... so... try at least two more things: 1. Use a different USB port, in fact, try all, and (temporary, to troubleshoot) unplug any other USB device. 2. Try a different cable. 3. Reboot with the icicle plugged in.

Plugin GUIs not showing up in Logic Pro 8

Eg Multipressor only shows settings sliders....no interface view.
Any ideas?
Cheers
Sty

Stuart Duncan3 wrote:
Eg Multipressor only shows settings sliders....no interface view.
Any ideas?
The View dropdown?

Record enable button not showing up in logic pro x?

it is checked under the "configure track header" box and even has a blank space for it ("input monitoring" button is slid to the right), but is invisible. checking and unchecking "record enable" slides the "input monitoring" button right and left. this isn't an issue with the built-in mic on my comp but does become an issue with my m-audio fast track. i have the fast track set as the input and output and can hear the microphone through the monitoring (although i don't think any added effects are present in the microhpone monitoring). it just cannot record. what? is this a driver issue or something? logic displays the interface correctly with the name and everything. thanks for any help.

Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

Nexus2 doesn't show up on Logic Pro X

So i installed the Nexus2 like instructed by ReFX, but its not showing up in Logic. I did the licence USB thingy, transferred content folder onto hard drive etc etc. I checked vst and the component folder, and nexus2 was there. But its not showing up on logic pro x. Help?? Ive restarted my computer and re-installed it like over 10 times now, but it just doesn't seem to work. Many thanks!

Check Logic Pro X's Audio Unit Manager.... (LPX's menu bar / Logic pro X > Preferences > Audio Unit Manager.... ) and see if it's listed there..
1) If it is not there you have not correctly installed the plugin or... it's not the 64bit AU version that you have installed... Check you have downloaded and installed the 64bit AU version.
Note: Logic Pro X only supports 64bit Audio Unit (AU) plugins and not older 32bit AU nor any other plugin types like VST and RTAS etc...
2) If it is shown there, it will have a status message next to it....
a) Successful Validation - You are not looking in the correctl place in Logic Pro X.. Create a Software Instrument track and then select that track and in the track strip.. click on the Instrument Button and look under the AU Instruments section at the bottom of the popup menu that appears...
b) Failed Validation - Select the plugin and click on reset & rescan selection button. If it still fails validation contact ReFX for assistance...
c) Crashed Validation - See (b)
d) Couldn't be opened - See (b)

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Why my old emails are not showing on the blackberry

Hi Guys,
I have just bought Blackberry Curve 9360. Can somebody, please tell that why my old emails are not showing on the blackberry. May be it has not synchronized my whole mailbox.
Kindly advise how can I do that.
Regards... Murtaza

Old emails, in what manner? As in previous to installing the account on this device?
Did you use the Device Switch Wizard found in the BlackBerry Desktop Software?
How did you move your old emails over from the old device to the new?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

LSMW - Read Data not showing in Converted Data

Hi,
I am using LSMW to load data from a flat file (via recording). I have it working except I have one issue. When I display the data in read data all fields are showing. No errors popup when I select convert data. When I select display converted data the last few fields are missing. Any ideas why or how to fix this?
Any help is appreciated as I do not know how to proceed.
Thanks,
Annette
Edited by: Annette Ameel on Dec 4, 2008 5:37 PM

HI Bush,
Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem

Why is my texing keyboard not showing on the screen? I have the latest version sw of 6.0 on a 4S

Why is my texing keyboard not showing on the screen? I have the latest version sw of 6.0 on a 4S

Double tap Home button, delete Messages from the multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Why is my site Title not showing in Firefox?

Hello
On my site at http://fbibiz.com/, the page Title flashes briefly in the Title bar, but then reverts to 'Mozilla Firefox'. The title tag is in place (correctly as far as I can see).
Any suggestions, please, as to why my page Title is not showing correctly?
Thanks,
Jon

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Why will my iphone 5c not show up as a device on my itunes?

why will my iphone 5c not show up as a device on my itunes? this is the first time it has ever happened ?

Here is the troubleshooter:
http://support.apple.com/kb/TS1538

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

Why are my five websites not showing up in my CC browser window - CC Account Panel?

Why are my five websites not showing up in my CC browser window - CC Account Panel?
I have a full account!
g

Gmpulaski which web sites are you referring too? Is it the five Business Catalyst sites included with your membership?

Why is my midi data not showing up on Logic Pro X?

Similar Messages

Maybe you are looking for