Why is my MM Message stuck in my Outbox?

I have a Nokia 6230i. I have constructed a text message and inserted a jpg photo, size about 20KB. When I press send it asks for a number, I supply it and it goes to the Outbox, where it stays. How can I get to send (transmit) it? Any help would be appreciated.

Have you sent MMSs previously with this handset & SIM?
Sounds like you need to get the settings again from your network / service provider.
If they have a decent online system, they should be available from there... if not, try the Nokia site, or give your operator a call.Message Edited by richcowell on 10-Jul-2006
08:17 AM
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

I've noticed several messages stuck in my outbox.

I've noticed several messages stuck in my outbox. I haven't received any kind of error messages. I have to gmail accounts that this is affecting. Sending from my iPhone works, but not from my macbook pro apple mail client. Ive tried rebooting mail, rebooting the computer, and renewing the DHCP lease to no avail. Anyone have any ideas?

Hi docloco,
Welcome to the Apple Support Communities! I understand that have messages that are not sending from your MacBook Pro. I understand that this is happening to two different gmail accounts. This makes me think that it is not an outgoing username or password issue, but maybe an outgoing mail server issue. I suggest confirming the outgoing server settings with the following article. You can confirm the settings on your computer in Mail > Preferences > Accounts.
Mail Settings Lookup - Apple Support
https://ssl.apple.com/support/mail-settings-lookup/
If the settings are correct and the issue continues, I suggest using the article below to isolate the issue to get it resolved.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
I hope this helps,
-Joe

I have two messages stuck in my outbox

There are two messages stuck in my outbox. Nothing has changed in my server configuration which I checked. Should I delete them and start again?

Mail uses a mail Receiver and a mail Sender. They are fairly independent. The settings for one can be fine while the settings for the other are a mess.
Mail > Window > Connection Doctor ...
... will give you insight into whether this is a connection (and therefore a configuration) problem.

Messages stuck in Outbox in Outlook

We are running Exchange 2007 SP1 and Outlook 2007 SP2.
We are increasingly recv'ing reports of users having messages stuck in the Outbox folder of their Outlook client. The messages are also visible in OWA, although the strange thing is that the messages do seem to have been delivered.
There seem to be a multitude of posts about this issue, but nothing concrete - does anyone know if MS has found a fix for this?
I can see this:
http://support.microsoft.com/kb/948984.
However, it states:
"In this scenario, when you log on to the online account that uses this personal folder, the Outbox folder indicates that there is a message that is waiting to be sent. This message is visible only in Outlook Web Access. The message is not visible in Outlook 2007"
- The difference is that we see this in Outlook 2007 as well.
Anyone?

Hi Yoshi,
1. Would you please let me know whether your customer has same scenarios described by the KB (Move Sent Items from OST to local PST file) when the issue occurs?
2. Whether the issue always occurs and can be reproduced? If the issue can be reproduced, please let me know the steps which reproduced the issue
3. If the issue can always be reproduced, please let me know whether the issue occurs if you use OWA to send email or use Outlook Online Mode to send email.
~~~~~~~~~~~~~~~~
Mike Shen
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]
~~~~~~~~~~~~~~~~

Messages stuck in outbox in Mavericks

there are 3 random messages stuck in my outbox on the retina mb pro running 10.9.4. they won't sent after all tries including restarting computer. anyone have any ideas? everything else is working as intended in mail. Many thanks for any suggestions!
ptkmac

From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send one of the messages and post the text that appears. Anonymize any personal information before posting.

ABAP Outbound Proxy: some messages stuck in CRM system

Hi all,
we've a strange issue with a ABAP Outbound proxy we've generated in our CRM 5.0 system (asynchronous interface).
Sometimes messages stuck in the CRM system. They are in status 'Scheduled' (green flag) in SXMB_MONI in the CRM system. When I have a look at the corresponding queue, there's no message within. Status in SMQ1 and SMQ2 is fine, too. All queues are registered. When I reprocess such a message manually in SXMB_MONI in CRM with the restart button, they're sent fine to XI.
Please note: it's NOT a general issue with that outbound proxy. In most cases the messages are sent immediately, just in some cases the messages stuck and I don't know why.
Is it possible to restart such messages automatically? I just know the report RSXMB_RESTART_MESSAGES, but that one just restarts messages in Error status. But the ones we have aren't in error status so they cannot be selected with that report.
Any idea where could be the problem / we should check?
BR
Holger

On which SP r u working correctly. May be an SP upgrade could help.
Regards,
Prateek

Messages Stuck In Outbox Vanished Into Thin Air

I sent a bunch of important messages to my e-mail when browsing Safari, but for some reason they weren't going through and were stuck in my outbox.Now all of a sudden all those messages are nowhere to be found in my mailbox, and I know I didn't delete them.Would an update wipe them all out?Is there any way to recover them?I don't understand why all of a sudden they are gone.I have looked everywhere for them.

I had an excellent Apple support agent named Luis who helped out. Re-installed the account partially. Discovered that there is in fact a bug in Yosemite. The mail client in mac will not save the outgoing server address and confusion amongst different mail account happens, added to outbox messages stuck. Hopefully Apple will correct bug in later OS X version. Case number 753401346

Messages stuck in AQ

DB version: Oracle Database 10g Enterprise Edition Release 10.1.0.3.1
A small number of messages stuck in a queue table when our messaging system load is high.
The 'state' column has value '3' in all these rows. What does that mean ?
Why they are stuck over there ?
thanks
We got following rows when query the queue table:
SQL> select * from trans_t_2;
Q_NAME MSGID
CORRID
PRIORITY STATE
DELAY
EXPIRATION
TIME_MANAGER_INFO
LOCAL_ORDER_NO CHAIN_NO CSCN DSCN
ENQ_TIME
ENQ_UID ENQ_TID
DEQ_TIME
DEQ_UID DEQ_TID RETRY_COUNT
EXCEPTION_QSCHEMA EXCEPTION_QUEUE STEP_NO
RECIPIENT_KEY DEQUEUE_MSGID SENDER_NAME
SENDER_ADDRESS
SENDER_PROTOCOL
USER_DATA(STORE_ID)
USER_PROP()
AQ$_TRANS_T_2_E 495DCB163CD07743E040A8C039014231
:EMAILDRIVER:
0 3
0
0 0 0 0
26-MAR-08 03.22.56.895319 PM
WIRELESS 34.16.7968
0
TRANS_Q_2 0
0
TRANS_STORE_OBJECT(738922)
AQ$_TRANS_T_2_E 495E82B0D97B33BBE040A8C0390145BC
:EMAILDRIVER:
0 3
0
0 0 0 0
26-MAR-08 03.22.56.914877 PM
WIRELESS 2.34.522909
0
TRANS_Q_2 0
0
TRANS_STORE_OBJECT(738924)

Hello,
The messages are not stuck they have expired and been placed in the default exception queue AQ$_TRANS_T_2_E. The messages will have been put in the queue for the EXPIRATION_REASON given in the AQ$TRANS_T_2 view. The messages will have been placed in the exception queue by the qmon processes for that reason and when designing your application you need to consider the possibility that messages may be placed in the exception queue and what you intend to do when they are placed there.
When examining the state of messages in the queues associated with a queue table you should be querying the view AQ$TRANS_T_2 and not the underlying objects. The view interprets the underlying values for you and gives consistent information generated from all the objects associated with a queue table.
Thanks
Peter

Message stuck in queue: Sequence already terminated

Dear all,
in my scenario I splitt a message and send it to two receivers.
Sender RFC
Receiver (both) : JDBC
The first message stuck with error message:
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Sequence already terminated.</SAP:AdditionalText>
I set parameter QRFC_RESTART_ALLOWED = 1 in sxmb_adm.
But in SMQ2 I still see error: XI Error ERROR_OBJECT.INTERNAL: Queue stopped
Trying to execute the LUW, I received following status error:
Function module does not exist or EXCEPTION raised.
But I could not see any error description that helps me dealing with this error.
Any ideas why it stucks?
Regards
Chris
Edited by: Christian Riekenberg on Sep 8, 2011 2:48 PM

Hey, thanks for that! It is very intersting to see how that works. Looks like the outgoing mail queue can change "on demand", like when you left only one account active. This means that the ability to send emails from any of the accounts regardless of where it came in is just a programming step away...

JMS messages stuck as Pending messages

          Hi.
          I am trying to write an application to process huge amounts of data. I try to
          process around 1,000, 000 messages [java objects] using a single queue and 8 MDB.
          The strange thing is that in the end there are always 10 messages stuck in the
          pending message category.
          I can also observe that a weblogic thread is stuck. [can see it in the console]
          The stuck thread current description is something like "Connectio27.Session28".
          I have tried to use the QueueConnectionFactory from a EJB using resource reference
          instead of fetching it directly. Even this has not helped. I guess the problem
          is that while loading the messages onto the queues, one of the threads gets stuck
          somewhere.
          I am sing MDB's for processing. There doesnot seem to be any problems on the MDB
          side.
          If I reboot the server the 10 messages get processed successfully.
          Any ideas will be highly appreciated.
          -Sharma


if you waited for a minute or so between each threaddump, it definitly
          sounds like an issue around the database query not returning or there is too
          much data being returned.
          sree
          "Ghanshyam Sharma" <[email protected]> wrote in message
          news:40e2d9d6$1@mktnews1...
          >
          > Hmm, I didnt wait too much between thread dumps. Probably a minute or two.
          >
          > Let me check the oracle stuff.
          >
          > Thanks a Lot.
          >
          > -Sharma
          >
          > "sree bodapati" <iwillreply@thenewsgroups> wrote:
          > >Threaddumps dont seem to show much except for it looks like both execute
          > >thread 13 and 12 are stuck reading from oracle , you may want to see
          > >what
          > >query is being sent to oracle by instrumenting you MDB code see that
          > >query
          > >properly returns. The threads are runnable but they dont seem to move
          > >, what
          > >was the duration between each thread dump ?
          > >
          > >/
          > >sree
          > >
          > >
          > >"Ghanshyam Sharma" <[email protected]> wrote in message
          > >news:40e2ce39$1@mktnews1...
          > >>
          > >> Hi Tom.
          > >>
          > >> I am attaching a thread dump of the server on windows, when I have
          > >20
          > >messages
          > >> stuck as pending with MDB's having not-supported transaction attribute.
          > >>
          > >> I hope this helps in debugging the problem. Please let me know if
          > >something is
          > >> needed.
          > >>
          > >> Thanks everyone.
          > >> -Sharma
          > >>
          > >>
          > >> Tom Barnes
          >
          ><[email protected].bea.com>
          > >> wrote:
          > >> >As I wrote below, a thread-dump of the WL Server that hosts
          > >> >the stuck MDB might help explain things.
          > >> >
          > >> >Sharma wrote:
          > >> >
          > >> >> Hm, this is confirmed. I pumped in one million messages a few time
          > >> >with and without
          > >> >> file stores to differe the performance, but every time I get a clean
          > >> >slate :)
          > >> >>
          > >> >> Looks like having required transaction attribute somehow removes
          > >this
          > >> >problem.
          > >> >>
          > >> >>
          > >> >> But still I do not understand why messages were getting stuck with
          > >> >not-supported
          > >> >> attribute. Tom is it possible to understand this. The
          > >phenomenon/Reason
          > >> >behind
          > >> >> this may show up somewhere else :)
          > >> >>
          > >> >> -Sharma
          > >> >>
          > >> >> Tom Barnes
          >
          ><[email protected].bea.com>
          > >> >> wrote:
          > >> >>
          > >> >>>The default is no transactions. I also find it curious
          > >> >>>that this helps. I wonder if tx timeouts are helping here...
          > >> >>>
          > >> >>>Sharma wrote:
          > >> >>>
          > >> >>>
          > >> >>>>Surprisingly I could process all one million messages if I
          configure
          > >> >>>
          > >> >>>the MDB's
          > >> >>>
          > >> >>>>as folowing.
          > >> >>>>
          > >> >>>>Default-transaction=required
          > >> >>>>Transaction-typr=container
          > >> >>>>
          > >> >>>>When I was getting the problem, I had nothing for these settings.
          > >> >I
          > >> >>>
          > >> >>>do not know
          > >> >>>
          > >> >>>>what is the default, probably Not-supported ???
          > >> >>>>
          > >> >>>>Let me try my testing a few times and than confirm to you guys.
          > >> >>>>
          > >> >>>>Tom Barnes
          >
          ><[email protected].bea.com>
          > >> >>>>wrote:
          > >> >>>>
          > >> >>>>
          > >> >>>>>Since you narrowed the problem down to the MDB side, can
          > >> >>>>>post a thread dump of the server when it is stuck? That
          > >> >>>>>might help diagnose the problem.
          > >> >>>>>
          > >> >>>>>Ghanshyam Sharma wrote:
          > >> >>>>>
          > >> >>>>>
          > >> >>>>>
          > >> >>>>>>Infact The thread which is stuck is not the loader/message
          producer
          > >> >>>>>
          > >> >>>>>thread. It
          > >> >>>>>
          > >> >>>>>
          > >> >>>>>>is a thread handling message driven beans. My producers end up
          > >populating
          > >> >>>>>
          > >> >>>>>the
          > >> >>>>>
          > >> >>>>>
          > >> >>>>>>JMS correctly.
          > >> >>>>>>
          > >> >>>>>>This is 81sp02.
          > >> >>>>>>-Sharma
          > >> >>>>>>
          > >> >>>>>>"Ghanshyam Sharma" <[email protected]> wrote:
          > >> >>>>>>
          > >> >>>>>>
          > >> >>>>>>
          > >> >>>>>>>Hi.
          > >> >>>>>>>
          > >> >>>>>>>I am trying to write an application to process huge amounts
          > >of
          > >> >data.
          > >> >>>>>>>I try to
          > >> >>>>>>>process around 1,000, 000 messages [java objects] using a single
          > >> >>>
          > >> >>>queue
          > >> >>>
          > >> >>>>>>>and 8 MDB.
          > >> >>>>>>>The strange thing is that in the end there are always 10
          messages
          > >> >>>
          > >> >>>stuck
          > >> >>>
          > >> >>>>>>>in the
          > >> >>>>>>>pending message category.
          > >> >>>>>>>
          > >> >>>>>>>I can also observe that a weblogic thread is stuck. [can see
          > >it
          > >> >in
          > >> >>>>>
          > >> >>>>>the
          > >> >>>>>
          > >> >>>>>
          > >> >>>>>>>console]
          > >> >>>>>>>The stuck thread current description is something like
          > >"Connectio27.Session28".
          > >> >>>>>>>
          > >> >>>>>>>I have tried to use the QueueConnectionFactory from a EJB using
          > >> >resource
          > >> >>>>>>>reference
          > >> >>>>>>>instead of fetching it directly. Even this has not helped. I
          > >guess
          > >> >>>>>
          > >> >>>>>the
          > >> >>>>>
          > >> >>>>>
          > >> >>>>>>>problem
          > >> >>>>>>>is that while loading the messages onto the queues, one of the
          > >> >threads
          > >> >>>>>>>gets stuck
          > >> >>>>>>>somewhere.
          > >> >>>>>>>
          > >> >>>>>>>I am sing MDB's for processing. There doesnot seem to be any
          > >problems
          > >> >>>>>>>on the MDB
          > >> >>>>>>>side.
          > >> >>>>>>>
          > >> >>>>>>>If I reboot the server the 10 messages get processed
          successfully.
          > >> >>>>>>>
          > >> >>>>>>>Any ideas will be highly appreciated.
          > >> >>>>>>>-Sharma
          > >> >>>>>>
          > >> >>>>>>
          > >> >>
          > >> >
          > >>
          > >
          > >
          >

Hello I am just wondering why there is a message of error 1004 when i tryed to make the update on my apps. Does someone know what it means?

Hello I am just wondering why there is a message of error 1004 when i tryed to make the update on my apps. Does someone know what it means?

Yes, many know what this means. You can too. Just type in "error 1004" in the search box at the top of this page. Or, just look to the right. You'll find many links in the "More Like This" box.
Always good forum etiquette to search for previous posts on the topic before posting.

HT1687 why is my voicemail messages not displaying ?

why is my voicemail messages not displaying ?

Voice mail, including visual voice mail, is a carrier feature. Contact your carrier and ask them.

Why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

Reboot the machine.

Why am I getting messages such as "The command "Image Size" is not currently available" when trying to run an Action that has always worked in the past and when the particular Commands do work if used by themselves?

Why am I getting messages such as "The command Image Size is not currently available whenever I try to run an Action that uses the particular command (and which has always worked fine previously) and when the particular command works fine when used on its own?

I would think that image size would always be available when there is an active document in Photoshop. The only time I remember seeing messages like that where they should work was during the five month period when Adobe released CS6 with so many bugs which took Adobe five months to fix. During those five month messages like that that should not have happen were common when action switch between documents. Adobe would start processing the next Action step before the document switch completed, Any step that required an active document could fail with a mess stating the command is not available.
Are you by some chance using CS6 version 13.0 CS6 without any updates. Use Photoshop menu Help>About Photoshop. If it shows CS6 version 13.0 you need to update CS6. .

Mails/Alerts-triggered for messages stuck in queues and failed in moni

Hi,
I have two doubts.
1) Messages are getting stuck in smq2 of my ECC and PI system. I have to manually push them. Is there any mechanism in which we can get alerts/mails when messages get stuck in queues.
I have already gone through the blog /people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors and I have implemented it in ECC system. But no mails were generated.
2)Is there any method in which I can get alerts/mails when a message fails in sxmb_moni of ECC system?
Thanks and regards,
Siji

Hi Sanjeev,
I made a report with the following code in it and executed it. So I think that should work even if the job for it is not scheduled. There were messages stuck in queue. But no alert was generated. I had also created alert category in ECC.
Thanks and regards,
Siji

Why is my MM Message stuck in my Outbox?

Similar Messages

Maybe you are looking for