Why is my mouse jumping up,down,side to side all over the page?

This has been happening for a week. The mouse is jumping very fast; up,down,side to side, I can't find it sometimes; I cannot control it!
== This happened ==
A few times a week
== about 5 minutes ago again

Jumpy Trackpad
http://support.apple.com/kb/TS1449
Go step by step and test.
1. Restart
2. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after  testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
  4. Reset PRAM:   http://support.apple.com/kb/PH14222
5. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
    Click the spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select  Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the  time remaining estimate.
    Last 1 minute may take longer.
  If this does not solve the problem, you may have to take the computer to the Apple store
to have it checked out.
Best.

Similar Messages

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • My magic mouse keeps jumping all over the page

    Hi, my magic mouse keeps jumping all over the page and random apps keep appearing on my screen when I'm in facebook and it keeps sliding onto my dashboard screen.

    Thanks so much for replying Barry.  Did what you said but took me 6 attempts to be able to reply to you so unfortunately did not work.  Have to wait over a week to get into Apple store so I guess I've just got to wait.  This is my second magic mouse and its driving me crazy.  Touch pad also playing up but thanks for the advice and have a good day.
    Megs

  • When printing a web page the type is spaced out all over the page, why?

    when I try and print a web page out on firefox it spreads the words out all over the page so it is unreadable. I never had this problem until recently.

    This is a regression that was introduced in Firefox 4.0 beta 12. It is fixed in 4.0 release candidate 1, which is now available. Go here: http://www.mozilla.com/en-US/firefox/4.0rc1/releasenotes/ and click on the green button "Firefox 4 rc free download". Note that you should do a custom install and change the install directory to the directory where your beta version is located. Alternatively, you should receive a notification that an update is available from within the beta version. Follow the instructions to download and install the update, and once you are running the release candidate, your printing problem should be fixed.

  • My cursor is jumping all over the page

    For no apparent reason all of a sudden I can not control my curser with my touch pad on my MacBook Pro
    Tried cleaning it tried rebooting it but still I am not able to control the curser
    Any ideas

    Hello Fred,
    It certainly can be inconvenient and frustrating when your trackpad is acting erratically.  I recommend reviewing the following article for an issue like this:
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/ts1449
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My mouse keeps jumping all over the place and i dont know why!

    My trackpad doesnt allow me to fully control the mouse on the screen! it keeps jumping all over the place and i dont knw why! i updated my computer yesterday and it was working fine but by the end of the night it started to not function properly again.                   

    A fairly well known flaw that occurs to some trackpads. See here: http://support.apple.com/kb/TS1449

  • Does anyone know why my mouse cursor jumps all over the screen at times?

    Does anyone know why the mouse cursor jumps all over the screen at times, especially if I am playing solitare?  Is it Yahoo games or my Apple?

    Is this a Magic Mouse you're talking about?
    If so there's already discussions about this here and maybe related to it, here.  Also google something like "jumping magic mouse" and there's no end of discussions on this topic

  • Why is my mouse jumping around?

    My mouse keeps moving randomly all over the screen but I don't even touching my macbook

    Jumpy Trackpad
    http://support.apple.com/kb/TS1449
    Go step by step and test.
    1. Restart
    2. Shut down the computer.
        Clean the trackpad with moist not wet microfiber cloth.
        System Preferences > Point & Click
        Try turning off three finger dragging and then turning it on after  testing.
    3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
      4. Reset PRAM:   http://support.apple.com/kb/PH14222
    5. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    6. Close all windows and quit all applications.
        Click the spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
        Select Disk Utility from the drop down. When the Disk utility window opens up,
        select  Macintosh HD, then First Aid.
        Click Repair Disk Permissions button.
        Ignore the  time remaining estimate.
        Last 1 minute may take longer.
      If this does not solve the problem, you may have to take the computer to the Apple store
    to have it checked out.
    Best.

  • Why is my page or connection jumping all over the place after my recent update to firefox 5.0

    I came back from a week away and when I got on the internet firefox had updated to 5.0 and ever since then my pages just jump all over the place Why?

    Hi Aish,
    I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
    I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
    In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
    I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
    My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
    Can you please get back to me with an answer to this? I would be very greatful!
    Marc.

  • Why is the webpage jumping all over the place with parallax scrolling?

    Hi all, I'm getting a little frustrated here... I've built a looooong (10,200 pixel) parallax scrolling site, when I click 'Preview' it plays like a dream, but when I render the HTML, view in browser or publish to business catalyst to view, it just jumps all over the place. I realise that the page is extremely long, I'm thinking it could be that but just need to clarify it before I rework it all and maybe find out after, that it was something else that was causing it to happen.
    Your views would be greatly appreciated!

    Hi Aish,
    I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
    I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
    In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
    I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
    My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
    Can you please get back to me with an answer to this? I would be very greatful!
    Marc.

  • Mouse is Jumping all over the screen...

    I have been having all kinds of problems with my mouse. The one on my computer will at times not respond to touch... I thought I had fixed that by wiping it down but it still isnt great...
    Then my mouse started having the cursor jumping all over the screen... I ended up going and buying a Magic Mouse as the guy at the store said my mouse was going bad... Well I have been great with the magic mouse for about 24 hours and now it is starting to do it again...
    Any ideas of what I should do?

    Buy a Logitech Bluetooth mouse!! I have had no problems with my Logitech...it seems like more people have problems with the mighty mouse and magic mouse. That is my opinion. I have this mouse:
    http://store.apple.com/us/product/TQ089LL/A?fnode=MTY1NDA1Mg&mco=MTA4MzgwNzg

  • Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date shows up incorrectly.

    Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date/time shows up incorrectly. It started happening after I updated to OS X Mountain Lion.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • My screens keep jumping all over the screen and changing size while I am trying to work why?

    My opened pages keep jumping all over the screen and changing sizes while I am trying to work - what is causing this?

    Madafk wrote:
    .... - I really love this Mac but it is taking a bit of getting use to
    Cheers
    You may find these Links helpful in enjoying your Mac...
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    Find Out How (Video)
    http://www.apple.com/findouthow/mac/

  • When in organizer how do I keep my cursor from jumping all over the place?

    When I am working in Organizer 12, My cursor jumps all over the place and the screen keeps repositioning itself.  It is infurating and I can't get any work done. New desktop iMac using Marevick 10.9.1  and wireless mouse and track pad both slowed to lowest level.  Also tried using a tethered mouse but no different.  Anyone else have this problem.  Is it an Apple problem?

    Is it a 'Magic Mouse'? If so that's why, there are many reports that it is badly behaved in the Elements Organizer. If not, do you have another mouse you could try it with (to rule out a hardware problem)?
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Satellite C600 - Cursor jumping all over the screen

    I was just issued the Satellite C600 and I cannot type without my curser jumping all over the screen. I've followed the advice from other threads with no success. "FN+F9" does not disable the touchpad, and there is no touchpad tab under Mouse Properties. In fact, when I search the whole computer for "touchpad" there is no response.
    Please advise!

    Hello
    Why you try to disable the touchpad?
    On Satellite C series there is a BIOS update that will solve this cursor jumping issue. There are already a lot of threads here in forum:
    http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm
    Check this!!!

Maybe you are looking for

  • Error configuring and starting Managed Server in WebLogic 10.3

    Hi, I am able to configure and start the Managed Server on windows environment. I am trying to configure Managed Server on linux environment. I am configuring the Managed Server with custom keystore. When I configured the Managed Server I specified t

  • Time Machine couldn't complete the backup due to a network problem

    Firstly apologies for the long post, I've been bottling these problems up and could now use some expert advice. I have a MacPro (10.6.3) with four internal drives (320GB system/apps. + 3x 750GB data, images etc) and a MacBook Pro (10.6.6) with a 320G

  • HR Form Editor - how to display text on payslip

    Hi Experts, I have an issue in HR Form Editor ( TCode PE51). In the earnings window of a payslip I have a wage type 2041(Ticket Fare Payment). At the time of evaluation if there is a value for this wage type then some text message has to be displayed

  • Itunes is getting all MPEG Download I Try to down

    I try to download any MPEG file , that should be treated by Windows Media Player (i.e.) , and Itunes get the control and I could not see the images...Does anybody had this problem?

  • Reinstallare iphoto per os x 10.9

    buongiorno, ieri ho formattato il mio mac mini ora mi ritrovo senza iphoto e non riesco più ad installarlo perché la versione del mio mac è antecedente al os x 10.10. come posso fare? avevo salvato tutte le foto e fatto il backup ma ora non so come r