Why is my movie sounding static

Every time I try to play a movie the audio is all static! Why and how do I fix it? This is a brand new hp touch screen laptop it should have good sound quality!

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't help, reset all settings. Settings>General>Reset All Settings. you will have to enter all of the device settings again, but you will not lose any data.

Similar Messages

  • Why is my  purchased movie sound low

    why is my purchased movie sound low

    It rather depends on the movie. Films with a lot of loud noises such as explosions are balanced with the speech level quite low, so that the loud noises really do sound loud. The result of this is that the dialogue sounds vastly quieter than a pop music recording, which is usually balanced to the highest possible level all the time. It's just a fact of life.

  • Why would a movie disappear from the store?

    Why would a movie that's been sold in the iTunes Store disappear from the store? It was a $14.99 movie too.

    Thanks,
    I suppose a mistake could have been made, but, other than that, it surely must be that a deal that would have kept it in the iTunes Store, somehow, wasn't done. That I haven't a clue about why is what's so frustrating.
    I find it interesting, too, that there are movies not in iTunes which I would think would surely be there. For example, 25 movies are listed for Tom Cruise but "War of the Worlds" (the only one I want) isn't there. Another missing movie I like to see from time to time is "The Sound of Music" with Julie Andrews (again, the only Julie Andrews movie I want).

  • Movie sound lags

    I purchased iTunes movies and when I try to play them using iTunes on my windows 8 laptop, the audio lags and is staticy.  Any ideas?

    yes - very much expected if your sound was in the timeline
    and set to "Stream". Stream sounds get
    embedded into the timeline and thereby forcing the animation
    to remain in sync with it - once
    removed then the animation is not really in sync with
    anything and it's dependant on the speed of
    the processor during runtime as to ohow fast the player
    renders each frame.
    with streaming sound, the player will actually drop frames if
    it has to to keep up with the audio.
    many developers, if needing to sync animation to time but
    have no need for audio, will "record" a
    bit of dead/empty soundtrack and place it on the timeline -
    repeating and set to stream to keep the
    animation in sync with the frame rate.
    flash is dynamic - it is not pre-rendered, fixed frame rate
    video format - it renders on the fly and
    "heavy" animations and/or slower processors will cause slower
    playback depending. of course the
    differences are very subtle with higher end machines and
    movies that are well optimized.
    --> **Adobe Certified Expert**
    --> www.mudbubble.com
    --> www.keyframer.com
    naplesart wrote:
    > Maybe somebody out there can explain this one.
    >
    > I have the same exact movie clip... both preloaded.
    >
    > Move With Sound
    >
    > Movie Without Sound
    >
    > Why would the movie
    without sound be noticeably... 10 + seconds longer
    > than the movie WITH sound... this makes no sense.
    >
    > Can anyone try and explain this?
    >
    > Thanks in advance.
    >

  • Why is there no sound coming from my mac air book ?

    why is there no sound coming from my mac aribook?

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    14. Make a "Genius" appointment at an Apple Store.

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark?  I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed.  Can someone help me?

    While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark?  I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed.  Can someone help me?

    It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

  • Why there is no sound when i connect my ipod to my pc via bluetooth

    i dont know why there is no sound, even though it worked i believe before IOS 7

    Yes, a computer can connect to/use bluetoothe headpphnes.
    Just what do you mean by " blutoothing with my pc"?
    I do not know what blutoothing means.

  • Why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed.

    why are my movies not showing on my Mac Book, which is the computer that I used to purchase the movie, but showing on my IMAC at home...I am currently deployed so this ***** a bit. Also how do I keep this incedent from happending in the future?

    No, this is not the case. I know where i purchased the movie and I also know movies cant be added to the cloud such as music, TV shows can.  The instance happened during the dowload. I think that depending which computer is up and running and the bandwith allocated on either network, which ever computer that finishes first is the one that gets the movie. Just a thought. So next time I will ensure my IMAC is not running. I think that fixes it.
    Thanks

  • Why are my movies not downloading? there is always coming error 9006 or it pretends that its loading but nothing is going...

    Why are my movies not downloading? there is always coming error 9006 or it pretends that its loading but nothing is going...

    wjdavis wrote:
    I can't remember exactly what I did. I do know that when I started it up, I couldn't find the Setup Assistant on the hard drive,
    No, once a user has been created, you can't run Setup Assistant  (without erasing and reinstalling).
    What do you recommend for fixing this?
    Here's what's happened: 
    When you first start up a Mac and create the first user account, OSX assigns it UID (User ID) #501.  The next one gets #502, etc.  Those UIDs (not the user name) are what control permission to files.
    You can see those numbers via System Prefs > Users & Groups;  click the padlock and enter your Admin password, then select an account and right-click it, and select Advanced Options.  Do not change anything on that window.
    So . . . assume your old iMac had a user 501 with the data you want; it's identified that way on the backups.
    When the Apple Store started up your new Mac, and created their account, it became #501.
    When you used Migration Assistant to transfer the 501 account from the iMac's backups, OSX copied everything there "as is" except it had to change the 501 to 502. 
    The new 502 account has all the right permissions to things now in it's home folder, but the backups belong to user 501.
    Have you added much to the Mac since you did the migration?  Have you done any new backups?  If not, while it's a bit of a hassle, one fix would be to create yet another user account temporarily.  Make it an Admin account.  Log on to it and delete all the other accounts.  Then migrate the accounts from your backups; this time there won't be a conflict, so OSX won't have to change the UUID(s).
    But if you have done new backups, this won't work, since Migration Assistant automatically uses the most recent backup.  There's a way around that, but it's a bit (or more) tedious.
    Clear as mud? 

  • HT1657 why is a movie that I rented on my iMac not identifiable on my Apple TV?

    why is a movie that I rented on my iMac not identifiable on my Apple TV?

    https://discussions.apple.com/thread/4159853?start=0&tstart=0

  • HT1657 why does every movie I download stops half way and says err=-50/err=-39?

    Why does every movie I download stop half way and say err=-50/err-39? I also have internet connection that is really good and it keeps saying to check that

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • HT1600 Why does a movie on my computer take an hour to download to AppleTV?

    Why does a movie on my computer take an hour and more to download to AppleTV?

    You keep changing the subject without closure, however if you did enter the correct password and it wasn't accepted, it was most likely the result of a networking issue with your network and nothing to do with whether or not the Apple TV is intuitive or not.
    I found some movies that I purchased were still on the "cloud".
    Yes, that's how it is supposed to work, movies purchased from the iTunes Store are always available through the 'Movie' feature.

  • Why cant I move my movies that I purchased on my ipad to itunes?

    Why cant I move my movies that I purchased on my ipad to itunes?

    Are they perhaps rentals?  Rentals can not be transferred.  If not, check your iTunes settings:

  • HT204370 how do i get the movie sound to play through the TV speakers, It is connected to my mac bookpro but the sound only comes through my macbook pro

    how do i get the movie sound to play through the TV speakers when watching a movie from Itunes, It is connected to my macbook pro but the sound only comes through my macbook pro.
    Thanks

    Transfer the movie from your iPad to your MacBook then. =)
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296

Maybe you are looking for

  • OEM GRID AGENT

    hi, I have already installed OEM 10g Grid Control OMS on my linux sever which also has EBS R12.1. I want to manage our EBS 11i which resides on another server I downloaded the Linux_Grid_Control_agent_download_10_2_0_2_0.zip file from OTN, and put it

  • Assigning profit center for vendor to vendor transfer (F-02)

    Hi, We are having two profit centers and would like to generate financial statments each profit center wise for which we must assign profit center for each entry passed. Now we want to transfer balance from one vendor to another(which is a normal sce

  • How to do a corba call in jsp ?

    hello sir, i m developing distributed application. JacORB is java orb used as middleware, jsp and tomcat used as web interface. i hava a difficulty how to call corba client method from jsp ?

  • New message opens behind email window

    We are using Windows 7 and Outlook 2010. When opening a new message or replying, the new window opens behind the email and is unseen. Is there a way to make the new window open on top (always)?

  • How to install photoshop plugins

    Hi Can you please tell me how to install photoshop plugins? and where to get free plugins for Cs Thanks