Why is my Muse homepage shifting left, leaving a blank gap on the right?

Hello,
I've had this problem since I started using Muse. When the homepages of sites I build are viewed on a tablet, they shift left, leaving a blank gap along the right side. Strange thing is that it only happens on the homepage, and the header (which is on the homepage master) stays perfectly centered. I've searched everywhere for answers and the only thing I can find is that there may be an element outside of the page. However this is definitely not the case with my files (neither on the homepages nor the homepage masters). I zoomed out and selected all, but nothing falls outside the page.
Here is the link to the site (in progress):
CONJURE DESIGNS • A CREATIVE DIRECTION, GRAPHIC DESIGN, & BRANDING AGENCY LOCATED IN NEW HOPE, PA | CONJURE DESIGNS
Here is the screen shot of how the home page looks on a tablet:
I wish I could upload the file is 18.5MB, after stripping out everything but the homepage.
Any help would be greatly appreciated.

The brain background fill image above the SERVICES heading is in a fixed size rectangle that sticks beyond the left and right edges of the page. If you make this rectangle 100% width and position the fill image centered, I believe that will address the gap at the right of your page in mobile browsers.

Similar Messages

  • When I enter full screen for a game or video using Firefox the whole "screen" moves to the left, leaving a white space on the right side of my monitor, but the mouse still acts like the image is where it should be, why?

    I have the latest Firefix update, and I am using Windows 7 Home Premium. It's annoying, specifically for games because I have to make sure the cursor is to the right (by a certain amount) of the item I wish to click. This issue is only in Firefox, I have tried in Internet Explorer *shudder* and there is no problem, I do not have any web browsers currently installed.

    Create a New Profile as a test to check if your current profile is causing the problems.
    -> Basic Troubleshooting: Make a New Profile
    * https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
    -> If that New Profile works then you can recover your Bookmarks and Passwords from the Old Profile.
    -> Recovering important data from an old profile
    * https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
    Check and tell if its working.

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • Background shifts to the left and begins to repeat on the right

    I've been using motion for a good while now for a long project I'm working on, and I've been having a consistent problem that I can only correct by saving, closing, and reopening my files. I have a bunch of layers, each with a background exactly the size of the canvas, and sometimes, at random (but always in sync with some button I push, like play, or the restart button, or what have you) that background becomes about five or ten pixels off center, to the left, and the clipped portion of the image repeats on the right. I've tried repositioning it but it doesn't work. It's clearly a glitch.
    Anyone know of a fix? It's annoying and a bit time consuming.

    Here's an excellent explanation of fixed resolution by Special Case:
    http://www.motionsmarts.com/tutorials/nutsandbolts/fixedres.html

  • How can I have multiple fields on the left and one large field on the right?

    I'm trying to conserve space on a form.  I have five "pass/fail" fields on the left and would like a large free text field to the right.  This will be an area to comment on the "pass/fail" section.  When I add the multi-line text box, it moves all my "pass/fail" mulitple selection boxes.
    Any advice?

    Sorry FormsCentral doesn't allow a fields to spam over multiple rows.
    Gen

  • I have to buttons that I cant remove. The button is on the left side of tabs and on the right side of the tabs. These arent back and forward buttons. When I go to customise they arent shown. How to remove it?

    I have two buttons that I cant remove. The button < is located on the left of the tabs and > is located on the right of the tabs. These aren't back and forward buttons. How can I remove them?
    [https://picasaweb.google.com/dookeybre/DropBox?authkey=Gv1sRgCLyTs7iUlqXE2QE#5594570123175636338 photo of the problem]

    Those buttons are used to scroll through the tabs if you have too many to display. If all of the tabs that you have open are visible, the buttons should not be displayed. If they are displayed all of the time there may be a problem with the theme that you are using.

  • Why would adobe muse recommend hosting on BC for form functionality, if the server does not support PHP!

    I am adding custom landing pages to a business catalyst site and the coding came back as unsupported.

    BC is a .NET system. BC handles much of what you need without any server side coding. In fact you cannot use server side coding on BC.
    Read some of the KB docs if you if you need form functionality as they have it built in. You want to build a site with PHP then look at other options for hosting.

  • Left hand doesn't know what the right is doing

    I ordered fibre optic broadband, tv & phone over 2months ago, after waiting 7weeks, 6 engineering no shows, 3 cancelled orders, 9 million different reasons why is hasn't been done and 3ton of BS - I do have tv and phone but have been given a copper connection that is far to slow for the needs of my home. I was told that the copper connection was only a temp arrangement to get me through until my street cabinet was updated to take fibre optic ( the box is currently inside the boundaries of a live building site and won't be aces sable for at least 8 or more months).
    I have since found out from someone in sales, another in customer care and 3 open reach engineers that I CAN have fibre optic but it needs to come from a different "box" and after asking around the street where I live I've found out that no less that 3 other houses have HAD installations of fibre optics that I have been told is unavailable!!! WTF is that all about - if it's unavailable to me then why is it being installed to others in my street??
    Since no one in the complaints dept is able to sort this out or even listen to what I have to say I guess I'm just the one who gets shafted with 1year wait for installation.

    as you are ordering fibre to cabinet your existing copper line is still used between your home and the street cabinet
    it is also possible your cabinet is possibly ful and awaiting upgrade use this checker and post back the results edit out you phone number though http://www.dslchecker.bt.com/adsl/ADSLChecker.TelephoneNumberOutput
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • The left speaker has lower volume than the right speaker of my pavilion g4-1202ax..

    please help me with this problem..
    the left speaker has low volume..
    but the balance is equal..
    what should i do??
    is any one there wants to help me?? 

    I tried tightning the cables to the computer too.

  • Table every row in new pages leaves a blank page at the end.

    Hi All,
    I have a nested table in a output form.
    All I have in this form is a nested table nothing else.
    as per the requirement to have every new row in a new page, I set the after parameter to next page / next content area for the parent row pagination.
    Now the result is if I have 5 rows, it creates 6 pages document where each row in each page and the last page is blank.
    I understand that the after parameter is intended to move to next page immediately after publishing each row, but how can I stop it at the last instance. or how can I overcome this blank page issue.
    If somebody has already gone through this, please share the solution with me.
    Thanks in advance,
    Sai

    After a long and annoying series of attempts and consulting your links, nancy, there has been no change. The page breaks works in internet explorer and google chrome but when i go to print in safari there are all type of blank page scattered about. Please open up this link in safari, http://onlinedevelopments.com/backend/csrSafetyServices.php?
    then go to print, and see the problem. I don't know what to do.
    idC=1157&id=947&vW=c&aD=3&vP=L5sJWFYsMs

  • My screen view is not face on i have massive expanse of white on the left and all info now on the right, it looks weird and have lost the moving right side curser button

    my web pages have all skewed to the right, happened after i copied sent emails by pressing alt gr, prt sc, and copy to word

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    *Firefox > Preferences > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    See also:
    *[[/questions/871531]]

  • Muse mobile version shifting left

    Hello,
    My site I designed for my client looks great and I love Muse! However when I view it on phone and tablet it is shifting left.
    All looks good but the shift. I reviewed my artwork to make sure no graphics were floating out there and everything is clean.
    I also created a phone version which it is not picking up. Please take a look and let me know what I can do to fix this issue.
    www.farmtoforkloudoun.com
    Thanks you,
    Vicky Quick
    QUE graphics

    That was not it.
    However I did fix it. In brower fill the tab that says "scroll" and the box that you can check called "motion", it was checked. I removed it and now it fits nicely in my mobile window and does not shift left anymore!  Also my site on desktops does not shift left to right either which is the way I want it.
    Somthing I would of never thought of but I was trying everything to get this to work.

  • Why does Firefox sometimes put the New Tab "+" button to the left of my open tabs instead of to the right?

    ''dupe of https://support.mozilla.org/en-US/questions/932160''
    [Re-posted with additional details when I thought this post had failed. Please respond to the other post and ignore this one. My apologies for the duplication.]
    In some windows, seems more likely after a crash recovery (but not sure there's a connection), Firefox puts the New Tab "+" button to the left of my tabs instead of the right. This is annoying, because once you're used to clicking it to the right of your open tabs, it's confusing to sometimes find it to the left.
    If I go into Customize mode, it still shows the "+" tab on the right, but as soon as I close Customize, it's really still there on the left edge of the screen.
    Why does this happen and can I stop it? I have seen no reports of this problem posted by others, but it's been happening for me since at least Version 12 and not fixed by version 13.0.1.

    This may be related to session restore.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=774943 bug 774943] - Session restore puts "+" button in the wrong spot and hides first tab
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=714382 bug 714382] - Leftmost tab is hidden when reopening browser window
    <i>([https://bugzilla.mozilla.org/page.cgi?id=etiquette.html please do not comment in bug reports])</i>

  • Why do 2 websites pop-up as one, i.e. PayPal on the left (narrow column) & Mozilla on the right, "glued together"

    Ofter upon opening Mozilla, a narrow (3 to 4" column) website appears on the left side of screen. To the right of that, a wider screen appears. In this current case, a 3-4 inch wide column of PayPal appears. Right smack dab next to that on the right side is a full screened Mozilla. By continually clicking, I can make the narrow col (PayPal) appear over to the right side which is what I want. But I do not want the narrow column of PayPal to appear at all. I want it to go away. Where did this style come from? It is useless and annoying. Thank you for any help to solve this problem - much appreciated.

    Bookmarks that open in the side bar (left side) is the default for bookmarks that are created via a link or button on a website to add a bookmark for that site.
    *Check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).
    *In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    *'''''Make sure that''''' "Load this bookmark in the side bar" is not selected (un-check it).
    If both pages display when Firefox is first started, check your Home Page setting. Firefox can be set to open multiple Home Pages, using the keyboard character "|" to separate them.
    *Set your Home Page - https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page

  • Why can't I change the right margin in Pages?

    I am using Pages 5.5.2 under OS Yosemite 10.10.2 on an iMac. I chose "Informal Letter" as the style, because I am trying to write a SIMPLE letter. It says the right margin is set to 0.5 inches, but the program WILL NOT allow the text to go beyond 6.5 inches. I have turned on the ruler and when I click in the paragraphs there is a blue upside down triangle in the upper ruler showing the limit of the text. If I click on that I can move it to the left, but it WILL NOT let me move it to the right. It forces the text to end at 6.5 inches from the left margin leaving a huge blank area on the right side of the page. This is ridiculous! In WORD it is extremely easy to move the right margin to the limits of the printer. Why won't Pages allow me to move the text limit of the line past the 6.5 inch mark?
    HELP!

    Hi Bush,
    what you suggested does not work. I set the right margin to 0 in the Documents settings, but still can only move the blue triangle to the left.
    Yes, I agree that there is a bug in the Informal Letter template.
    Peter wrote:
    Better to create your own template from the Blank template or use one of the other templates.
    A hint that might help you (in templates other than Informal Letter)
    My advice is the same as Peter's. Give up on the Informal Letter template and create your own template from Blank in Template Chooser:
    You will find that Document Margins and Insets on the Ruler actually work!
    Regards,
    Ian.

Maybe you are looking for