Why is my named anchor link not working

Can someone please help.
I am a novice at Dreamweaver - but my website works well with almost all links working.
Situation :
The problem lies on the following page www.ozonesystems.co.uk/airunits
There are 7 links in the table which point to Named Anchors
While browsing in Internet Explorer, all links work perfectly
While in MozillaFirefox or Google Chrome, only the fist 2 links work. The remaining 5 links do not redirect me to the appropriate section (anchor) on the page. There is no error message.
Can anybody please help with this problem?
Thanks - Roy Marnewick

Hi Jon
Many thanks for your reply and comments.
I am a real novice. I used ApDiv's only because I had a problem in getting images and text to reside where I intended them to be placed - and this was the only way which I discovered would achieve the result I required. I do not want to re-invent the wheel, so I will just live with problems which may appear to those using different size text, and hope there are minimal visitors doing this!
I will visit the link which you have provided to resolve the minor errors. Thanks for the link.
It is good to hear that (hopefully) the problem is not as widespread as I thought it might be as you did not experience a problem while browsing with Firefox36 and Chrome40. I will try and clear the browser cache as suggested - do not know how - but will try and find out.
Thanks & Regards
Roy Marnewick

Similar Messages

HTML anchor links not working (won't scroll down to content). Why?

Hi.
We have a portlet that simply pulls in an external web site so it can be viewed and accessed within our portal.
The navigation bar within this website using HTML anchors ("a href='#stuff' and "a name='stuff'") to let the user jump/scroll to a particular part of the page. The anchors work when the web site is viewed outside of the portal but don't work when the site is within the portlet window.
Anyone know why that is, and if there's a way to get those anchors to work?
Thanks.

Never mind: I figured it out.
Because of the way the anchor links in question were generated, they contained the entire URL of the current page with the anchor attached to the end of it. So when the portal rendered the URL, it rendered it in its normal JavaScript style:
javascript:void(pt_999.refresh('https://servername/portal/server.pt/gateway/...pagename?urlvar=foo#anchor'));
Once I changed the anchors to only contain the anchor itself ("a href='#anchorname#'), the portal did not convert the URL, allowing the anchor to work on the normal page.

I am using Muse v7.1 Build 329 anchor links not working

Hi
I am using Muse v7.1 and have found that anchor links from buttons and from text boxes fail to work in IE v10 but all work fine with Chrome.
I have seen comments from others that if I use a space in the code it will work but the whole point of Muse is that I don't need to code in Dreamweaver.

Hi
I have uploaded the html output to http://www.cloud-online.co.uk/index.html
The links that were not working locally in IE seem to be working OK when on a server.
I had only been testing the results locally until now. Attached are the output from the Muse file.
best regards
Tim Wallis MInstLM, MCSE
Managing Director
TWS Computer Services Limited
cid:[email protected]
e. [email protected]<mailto:[email protected]>
t. 01892 888251 m. 07733 265275
w. www.tws.eu.com<http://www.tws.eu.com/>
cid:[email protected]<http://www.twitter.com/twscs>
P Save a tree...please don't print this e-mail unless you need to
This email and any attachments to it may be confidential and are intended solely for the
use of the individual to whom it is addressed. Any views or opinions expressed are solely
those of the author and do not necessarily represent those of TWS Computer Services Ltd.
If you are not the intended recipient of this email, you must neither take any action based
upon its contents, nor copy or show it to anyone.
Please contact the sender if you believe you have received this email in error.

ANCHOR LINKS NOT WORKING!...STILL :(

Well another Muse update has come out and to much disappointment the same issues still exist with anchors. They do not work in Safari 6 running Mountain Lion, or iOS. Anchors in iOS have been an issue since the Muse Beta days... so I am now starting to doubt a fix for anchors in Safari.
What is so frustrating is how an addition to the "Hyper link" Menu that allows for the downloading of files has made its way in, yet a bug in the exported Javascript file from muse that controls the scrolling of anchors has yet to be resolved.

This problem should be fixed! Im using Anchors too in a vertical scroll page ive been working on for quite some time. The idea was to make it suiteable for not only safari, firefox etc but also ios devices. Now the whole site is unusable and since im doing this for a client my job is at stake. I went from dreamweaver and wordpress since i thought muse was a great tool concidering my background in visuals. I have also convinced others to convert to muse... quess i shouldnt. This problem or Bug seems to be here to stay. I've seen on the forum, several times, that a the Muse team are working on a fix but nothing is happening!
Now with the new release i was sure that this bug would dissapear in ios and Mountain Lion, but as desmo848 said... nothing.
Can the muse team give us an approximate answer on when its likely that this will be fixed? I have waited for a long time now and maybe i should just give up, leave muse and rebuild everything in another software.
Perhaps you could provide us with a temporary workaround, if there's one... some code.. until this is solved?

Iweb: Why do navigation bar page links not work live when published?

Why do the navigation bar page hyperlinks not work when site is published? There are no objects or boxes over. Works fine until published live. Help!!!

this image: http://extravorganza-events.com/extravorganza/Home_files/droppedImage.png
has a large transparency section above the visible (lower section), crop off the transparency section.

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Edge links not working

Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
The hosts file is in /private/etc/hosts and can be accessed through the terminal:
sudo nano /private/etc/hosts
If you see a bunch of adobe servers in there, that is your problem.

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
I came home, banged the phone against the wall and it worked.
Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Fresh Install HCM 9.1 but Links not working. Help please

Dear All,
I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
I downloaded all software from eDelivery.
HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
First Try:
Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
Second Try:
Installed Virtual Box.
Installed Windows 2008 R2 and applied the SP1.
Installed everything all over again.
Ensured the PTWEBSERVER password similar the username.
Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
Tried to login again, no error message and everything looks fine but... links not working.
Logs also looks normal to me.
Does anyone ever encountered similar issues before?
Does this is a normal behaviour before tools patch 85211 being applied ?
Thanks,
aLuNa
My APPSRV Log:
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

alunwawa wrote:
Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
Nicolas.
PS: @Jim, thanks for the kind words.
My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

Purchased Lightroom 5 and Download link not working. Please advise

I have Purchased Lightroom 5 followed the download instructions and Download link not working.
I get a dialog box stating that I have Explorer 4 and I need a later version.
I am in fact running Explorer 10.
Please advise.
Bob Spree
England

Please see http://forums.adobe.com/thread/1229333 where this topic has been discussed.

Why is my apple ID password not working on ipad2 after updating to iOS6?

Why is my apple ID password not working after upgrading to iOS6?

Who knows?
Settings>iTunes and App Stores>Tap your ID and sign out. Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Go back to the settings and sign back in again and see of it works now.
If it doesn't work, post back with some information that might help us help you. Describe what you are doing in some detail and it might let us better understand why this is happening.

Links not working correctly in PCUI for CRM

Hi All,
We are implementing mySAP CRM 4.0 through PCUI on Portal
EP6 SP14.
I have integrated the CRM Business Package 60.2 in Portal.
Proper User has been created in the backend and assigned Sales Manager Role both in the portal and in the CRM backend.
We are facing problem of links not working in the CRM Contents. When we click on the links in the CRM Portal Contents ( BSPs) we dont get the desired application opening.
When we click any links in the BSP's ( Activity Links in Opportunity Management BSP ) we get a blank page popped up.
I have the screen shots with me. Any one responding can get the screen shots from me.
Thanks in Advance
Rohit

Rohit,
Have you maintained configuration in (transaction CRMC_BLUEPRINT_C --> Navigation (URL Generation) --> Assign Object Method to Role)? Be sure that the role that you are using is present and ID Page/Service field correctly points to the pcd url for your portal.
When testing, it may be helpful to set parameter CRM_URL_BUFFER_OFF = X on the user profile (SU01) to turn off the url buffer. That way changes made above are immediate.
Best Regards,
Bernard

Web links not working in iPhone calendar notes. Used to work. Ideas?

Web links not working in iPhone calendar notes. Used to work. Ideas?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Why is my named anchor link not working

Similar Messages

Maybe you are looking for