Why is my Officejet 8500 909a not recognized by eprint?

Trying to use eprint on ipad, but it doesn't find my networked Officejet 8500 909a printer. This printer IS on the approved list, why isn't it being recognized?

Hi videoguy741,
Which method of using ePrint on your iPad for your Officejet 8500 are you trying to use:
Trying to print from the HP ePrint Service app?
Trying to print from the HP ePrint Home and Biz app?
Trying to email the printer using the ePrint service?
Clarifying will help specify the solution. However, the first option is not the most efficient and the third option is not possible on this particular printer. The second option, the HP ePrint Home and Biz app, would be the best option to print to your Officejet 8500 A909a printer from your iPad, over your local wireless network.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • Officejet pro 8000 not recognizing brand new HP black ink cartridge

    Hi. My officejet pro 8000 is not recognizing a brand new HP brand black ink cartridge. The black ink indicator remains lit and it will not print. I have unplugged the printer, but this did nothing. It is wierd, when I open the door where the cartridges are, the light goes out, it only goes on again when I close that door. The printer was working perfectly until this . Any helpful hints? Thanks so much.

    Hello chx2,
    Welcome to the HP Forums!
    I understand your Officejet 8600 is not recognizing your brand new black ink cartridge. I will do my best to assist you! Please make sure this printer is plugged into a direct wall. I just want to see if this makes a difference.
    Next, please follow these steps in order:
    1) Remove all ink cartridges from the printer, then close the door
    2) Remove the power cord from the printer (Do not press the power button)
    3) Please clean the ink cartridges by following this HP document here. (Also, make sure you have completed all the steps from this document)
    4) Wait 60 seconds or more, then plug the power cord back in
    5) Wait for the printer to turn on completely, then install the ink cartridges
    6) Try to print a document
    Please post your results, as I will be looking forward to hearing from you.
    I worked on behalf of HP.

  • Why do I keep getting "format not recognized" error?

    Hello,
    I was trying to play any of the video podcasts from Nick Jr (e.g iCarly, Drake and Josh) for my kids and I kept getting a "format not recognized" error on my APple TV and when trying to play on my PC with iTunes, the video doesn;t play at all. This seems strange to me as these podcasts are rated in the Top 10 under "kids and family" genre so they must be working for others. I was able to play other podcasts in this genre such as the Sesame Street podcast. Any ideas why these Nick Jr. ones aren't working for me?
    Thanks!

    I have been having the same problem - with podcasts AND with Movies and TV Shows bought through iTunes. I was hoping the recent 3.0 upgrade would fix it, but no such luck. While this was an occasional problem with iTunes 8, it seems to have turned chronic with iTunes 9.
    The annoying "solution" that seems to work is to unplug and replug the Apple TV and quit and restart iTunes. Even then, while watching TV Shows or Movies continuously it seems to work, but after any interruption, either due to shutting off the Apple TV or letting it go to screen saver for an hour or so between shows or movies, iTunes loses it from the device list, and the "format not recognized" message returns.

  • Why isn't my ipod touch not recognized by itunes it's a new ipod?

    I just bought a new Ipod touch nano because my old one was old and not recognized by itunes. Now my new isn't recognized by itunes either.

    Hello, priscilla235. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Hp officejet 4680 is not recognized by either wireless or usb connection. Windows 7 OS.

    This printer used to work wirelessly to my Windows Vista Laptop, then I bought a new HP tower computer and now the printer is not recognized by anything, new or old. New computer is an HP Pavilion Elite HPE running Win 7, old computer is a Sony laptop running Vista. I've tried turning on and off everything several times, unistalling and reinstalling all softwware several times, and running the HP Home Network Diagnostic Utility (both basic and advanced tools) several times. I have a Netgear 2.4GHz wireless network router -- Security type WPA2, Encyption type AES and a functioning Netwrok securty key that is not recognized by the wireless network setting on by the wirelsss netwrok wizard on the printer tools application. I don't remember running the network wizard to enable the printer when I was only using the laptop.
    Any help wopuld be most grateful.
    Thanks.

    I just fixed my J4680 printer a couple of minutes ago (see my post).
    Step 1: Unplug your printer
    Step 2: Uninstall the program J4680 and ALL associated HP programs (IRIS, Websmart, etc.). There is a screen to select ALL programs.
    Step 3: Reboot your PC to complete the uninstallation
    Step 4: Plug in your printer 
    Step 5: Download the FULL j4680 package from HP's support website:
    Step 6: Run the Installation. The first screen will ask if you want a Wireless connection so click on that. It connected my printer automatically.
    That's it. My printer is printing and scanning great.

  • Why is logitech 350 usb headset not recognized by my MBP?

    I have a Logitech Premium USB Headset 350 that is not recognized (at all) by my fairly new MBP, which is running OS X Lion 10.7.5. I have run all of the available software updates but the headset it still not recognized as an input or output device (under system preferences). When I plug it into my old PC (Dell Inspiron) it is recognized immediately and works perfectly. Can you please help me with this? I really want to me able to use the headset on my MBP.
    I have emailed Logitech several times and they have been unhelpful!

    Either read the headset user manual or contact the vendor.  You should also try posting in the Bluetooth forum area.

  • Why is an authorized MacBk Pro not recognized in iTunes?

    I'm using a MacBk Pro that iTunes says is authorized, but it is not showing up in my devices. It would be the 4th one as I just reauthorized the iPod because I thought that would help, but it didn't. THe other recognized and showing up in devices are iPad, iPhone and an Mac desktop.
    I'm not sure which community to post to, MacBk Pro? iTunes? Cloud? I feel like such a dolt not being able to figure this out, but I've looked at all I know to look for.
    I've had unfortunate lucky lately in the communities as I've asked a couple of questions in the past week or so and not gotten any response or suggestions. Am I not providing enough information to get support?
    The MacBk Pro is OS X 10.8.5
    iTunes is: 11.4
    Thanks for any help or direction or recommendations, as in where should I go for support?
    ct

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Printer Control iPad app can't find OfficeJet 8500 909g even though HP ePrint can

    The HP Printer Control app for iPad can't find the HP OfficeJet 8500 909g. The printer is properly connected to the wireless network and was found easily by the HP ePrint iPad app (and by my computer's utility and scan apps). But when that ePrint app suggested I use the Printer Control to do mobile scanning, the  PC app still couldn't find the printer.

    Hi,
    This is an expected behavior as only ePrint enabled devices are supported by the HP PRinter Control app, the specific model is not supported as you may listed below within the full chart of any supported products for the different mobile apps:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&lc=en&cc=us&dlc=en&product=3752459#N26...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet Pro L7580 not recognized and unable to install

    Hello everyone,
    We purchased a MacBook Pro and for sometime we had it connected to our HP Officejet Pro L7580 using its usb connection.  This MacBook Pro is running Mountain Lion software with the current printer update.  We moved and relocated our printer to a more suitable room.  In our house we have two routers.  Our main router is Actiontec MI424-WR and the secondary router is  Dlink DIR 655.  The Dlink is connected lan-to-lan with Actiontec. The printer is connected to Dlink router which is downstairs.  I have spent considerable amount of time figuring out why our MacBook Pro doesn't recognize this printer.  We have other computers at home that runs in unix (Ubuntu) and windows (Windows 7) and those computers are able to print, scan, and fax to this computer without problems.  The connections to all computers are the same which is wireless.  I have read a lot post in this community and as well as HP community and it doesn't provide any solution to this problem.  I am able to ping this printer from the MacBook with no problem.  When I install this printer using ip method the scan option is not there.  However if I bring the computer downstairs and install it using usb the scan option appears.  I am thinking that HP didn't provide a driver for scan option if you're connected wireless or ethernet.  But I found out that the current drivers for mountain lion for this particular printer has a scan capability.  I need some help in figuring out what's going on with this.  I would like to be able to scan using this laptop where I don't have to physically connect it to the scanner.  I am completely lost with Mac.

    Apple support:
    Network Printer Troubleshooting
    Reset Printing System

  • Why is it my iPhone is not recognized by iTunes when both are up to date?

    When I check my iPhone 4S it tells me that it is up to date  iOS 6.0.
    Same thing for iTunes 10 but iTunes tells me when I connect my iPhone "cannot be used because it requires iTunes version 10.6.3 or later. Go to www.itunes.com to download the latest version of iTunes."
    I take it I need to go back to older versions of each?
    And if so how do I go about doing that?
    Thanks

    I just wanted to follow up on this.
    According to Apple, Mac users do not have to uninstall iTunes for such things as I described and for the most part that is only needed on Windows machines.
    The conflict was I didn't actually have the right version of iTunes that my iPhone IOS 6 to recognize.
    I was unable to locate the actual page for 10.6.3 but finally found it.
    http://support.apple.com/kb/DL1575?viewlocale=en_US
    As to why my System Software Updater was unable to do this for me is still an unknown, nonetheless.
    Peace out.

  • Hp officejet scanner is not recognized after upgrading to snow leopard

    I tried calling HP twice and was disconnected both time before speaking to someone. The printer works, just the scanner will not work no matter what I do. Any ideas?

    Thanks, but I have fixed it. It is an HP officejet 5610 all in one. I finally found the answer after much searching. The fix was to unplug the printer (power). Turn the computer off for 30 seconds. Reconnect the printer and then turn the computer back on (in that order). Bingo it worked!
    My best,
    Joe

  • HP Officejet 8600 is not recognized by Acrobat 9.5.5 when trying to scan

    When trying to create a PDF document via Acrobat (file/create PDF), Adobe does not recognize my new HP Officejet 8600 print/scan/fax/etc.  Any solutions?

    Make sure you have the latest and greatest TWAIN driver from HP.
    If that does not work output TIFF files from the scanner then use Acrobat to create PDF from the TIFF.
    Be well...

  • Officejet 6500 scanner not recognized after driver upgrade with Mac OS Lion

    I have an Officejet 6500 E709n. Using Mac OS Lion 10.7.5 all software is updated.
    I was having printing issues so I "reset printing system" thru Mac System Preferences and uninstalled my print drivers that originally came with the printer from HP. I am using the drivers updated by Mac OS Lion.  The printing problem was solved! Sadly, I now have no scanning capability. I have followed many suggestions on scanning that I've found here on the forum, but my system no longer recognizes my printer as a scanner. The scan option is not even visible under the "print and scan" window in system pref. (I used to be able to click "print" or "scan" buttons on the printer window but even now there are no buttons giving those options).
    Thanks for your help and time! 

    Hi,
    As I understand from your email that you are unable to scan from the MAC OS X System, this is due to the software issue, so we need to uninstall and reinstall the completed software,
    Please follow the steps below and let us know how it was.
    Step 1:- Run the Scrubber to uninstall the previously installed HP printer drivers
     • Double click on the Macintosh Icon.
     • Click on Application and then on Hewlett-Packard.
     • Click on HP Uninstaller.
     • Select the device and press and hold Control + Options + Command (Apple) keys on the keyboard.
     • Click on Uninstall.
     • You will get a popup window “Are you sure you want to uninstall all HP Software packages”.
     • Click on OK to continue.
    Note: It will remove the software for all HP printers. If you have any other HP printer installed, you may have to reload the software and set up the printer again.
    During the process of uninstall, it might prompt you to enter the password of your computer to continue with the uninstall process. Please enter the password and click on Continue.
    Step 2: Download and install the latest software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-98080-2&cc=us&dlc=en&lc=en&...=
    Step 3: Add a Printer
    1. Click the Apple menu icon, and then click System Preferences on the drop-down menu.
    2. Click Printers & Scanners to open the printer’s folder.
    3. Click the plus sign (+).
    4. Select the product and from the print using option, from the drop down menu select the printer and not Airprinter, and then click the Add button.
    5. Follow onscreen instructions if any.
    6. After a few seconds, the product displays in the Printers list.
    Step 4. Try Scanning through HP Scan Application.
    Click on the Go Button on the top.
    Click on Applications.
    Click on HP Scan.
    Try Scanning and check.
    Also check from Print and Scan.
    Let us know the results.
     I am an HP employee, these posts are according to my knowledge and HP is not responsible for it.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • I updated to windows 10 and now my hp officejet 4630 is not recognized

    A new thing has occurred. Before, I was able to print from my phone and tablet (the purpose of buying a wireless printer) now, for some reason after this windows ten update, my phone and tablet no longer recognize my printer. Someone please help

    I upgraded from windows 7 to windows 10 and now hp officejet 4630 does will not print wierlessly or connected. when i search for updates i get the error message
    "• HP - Printers - HP Officejet 4630 series - Error 0x80240017"
    I've "retried a few times" but it still does not recognize the printer. Even when i attempted to go through hp assistant, it did not recognize my printer.
    Please help. Im a writer, student, and content provider, having a working printer is crutial to me.
    thank you in advance

  • Why is the CC desktop app not recognizing installs of applications?

    CC app is installed but does not recognize any oc the instalations of adobe products ( full suite installed)
    When running updates through the applications they are run through application manager not the CC Desktop app.

    Full Creative cloud suite. Instaled from a file not from the CC desktop app.
    There was still cs5.5 installed on the when CC was installed but thats now been uninstalled. I'm guessing adobe application manager should have gone with it but thats what opens when you run updates through photoshop etc. The Desktop app only shows lnks to download/try all the apps that are already installed.

Maybe you are looking for