Why is my Package just stopping when going from one Execute SQL Task to another Execute SQL Task
I have one flow constraint going for my one Execute SQL Task to another Execute SQL Task. It's executing #1 and successfully and just stops there rather than continuing on to Execute SQL Task #2. Why would it just stop? My constraint is NOT conditional...just
a straight ole flow constraint.
Any help is greatly appreciated and Thanks in Advance for your help.
PSULionRP
Hi PSULionRP,
First make sure the color of the Precedence Constraint is green (Success) or blue (Completion) other than red (Failure). Then, make sure the Execute SQL Task is not disabled (right click the executable, and “Disable” option is available in the right-click
menu).
Regards,
Mike Yin
TechNet Community Support
Similar Messages
-
Outlook 2010 not responding, hangs, freezes or stopped working when going from one email to another
Hi all,
I have an issue with one of my clients running Office Pro Plus 2010 32bit on windows 7 pro with exchange 2010 service pack 3 where they have voicemails coming in as .wav files and have a rule set up to automatically going into a sub-folder call
"voicemails". I have deleted all the voicemails except for 5 for testing purposes (as there was over 800 messages and thought this could of been the culprit). When opening these voicemail emails, outlook doesn't respond for about 1-2 minutes and
then opens the email eventually, then I can open the .wav file. The .wav files are approximately 50kb to 200kb in size. All other attachments seem to open quickly with the rading pane on or off.
Troubleshooting Steps I have done;
- Install the latest updates
- Check to make sure Outlook is not in use by another process
- Investigate possible issues with add-ins
- Check to see if your mailbox is oversized
- Repair your Office programs
- Repair your Outlook Data files
- Check to see if your antivirus software is up-to-date or conflicting with Outlook
- Create a new user profile in Outlook
- Created a new .OST
- Perform a Selective Startup to determine if another program is conflicting with Outlook (for advanced user)
- Create a new Windows user profile (for advanced user)
- Started in outlook /safe mode
- Turned off chached mode
- Checked error logs and receive a Outlook Hang error ID: 10001
Since doing all the above troubleshooting, I have found out the same problems occur within a Terminal Server Session (Server 2009 R2 with Service 1) running Outlook 2010 Professional Plus.
One thing I notice is that when I click on one of the email messages, where is usually says "connected to MS exchange", it is saying "requesting data from exchange".
The above is happening with another user so this is not user specific.
If you need any other info, just let me know.
Thanks in advance.Hi,
Logon OWA and check if the voicemails can be played fine, make sure the mails are good.
If you have installed the improper drivers for any devices or hardwares, this kind of issue may occur. Actually some devices which seem to have nothing to do with the issue may also be the culprit, like a printer or some audio devices in this case.
Try restore the system to an earlier date if you have backup.
If you have got the logs, you may post the complete logs here, it may help to determine the cause of the issue.
Regards,
Melon Chen
TechNet Community Support
Thank you very much for your reply. I could access in OWA successfully with a quick response and used this as a workaround. There was not too many logs to go from.
It looks like there was a server that was decommissioned around 6 months ago and just a test thought I would start this up to see if our voicemail server had any relationship with it - once I started this server up, voicemails
were opening quickly will all users. I am not sure if our voicemail software (Cisco Unity) is pointing to our old server or if has anything to do with DNS entries but will need to dive into this further as we cannot have the old server online for too
much longer.
If anyone would have an inclining as to what this could be, please let me know.
Thanks again. -
Premiere Pro CC 2014 Stops Responding When Going From One Project To Another
I'm running Pr CC 2014.2 - 8.2.0 (65) build - on Windows 8.1 (don't get me started.) I can work in a single project all day with no problems whatsoever. But if I have to switch to another project, Premiere stops responding. It won't let me End Task and re-open Premiere, I have to reboot. This happens each time I have to switch projects. I uninstalled and reinstalled Premiere to no avail. I've tolerated it for a couple of months now but it's getting to the point where I can't anymore.
Help, anyone?Hi,
Logon OWA and check if the voicemails can be played fine, make sure the mails are good.
If you have installed the improper drivers for any devices or hardwares, this kind of issue may occur. Actually some devices which seem to have nothing to do with the issue may also be the culprit, like a printer or some audio devices in this case.
Try restore the system to an earlier date if you have backup.
If you have got the logs, you may post the complete logs here, it may help to determine the cause of the issue.
Regards,
Melon Chen
TechNet Community Support
Thank you very much for your reply. I could access in OWA successfully with a quick response and used this as a workaround. There was not too many logs to go from.
It looks like there was a server that was decommissioned around 6 months ago and just a test thought I would start this up to see if our voicemail server had any relationship with it - once I started this server up, voicemails
were opening quickly will all users. I am not sure if our voicemail software (Cisco Unity) is pointing to our old server or if has anything to do with DNS entries but will need to dive into this further as we cannot have the old server online for too
much longer.
If anyone would have an inclining as to what this could be, please let me know.
Thanks again. -
Hello Community
A forestA and
a forestB exists on the network.
In forestA, active directory has an administrator.
In forestB, activre directory also has an administrator.
There is a trust reletionship between the 2 forests.
When the administrator for forestA accesses resources
in forestB, how can I make sure that the administrator in
forestA does not have administrative permissions in foresB?
Thank you
ShabeautThey do not have access by default unless if you delegate that to them. For high secure environments, you might consider implementing a Selective Authentication: http://technet.microsoft.com/en-us/library/cc755844(v=ws.10).aspx
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password -
When switching from one page to another, browser timeouts and have to refresh
I know I am antiquated, however, I have dial up still. I have never had this problem until recently. When going from one page (even in email) the browser does not load and I have to refresh or it will sit there giving no error and doing nothing. Resetting fire fox does not work.
Check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
You can also try to disable IPv6
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.
You can check the Network tab in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K) to see if that gives any clues about the cause.<br />
You can click an entry to see the response headers and check the Timings tab in the right pane.
*https://developer.mozilla.org/en/Tools/Web_Console
Note that your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
you can check its content with a plain text editor if you didn't create this file yourself.
The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
*http://kb.mozillazine.org/Preferences_not_saved -
why do I get this message when going on a website The requested URL was rejected. Please consult with your administrator. Your support ID is: 1074107325772756576. I have only experienced this while trying to go on the Michael Kors website. How do I stop this from happening?
That's a problem on the web server, not on your computer.
-
I have downloaded the song "Bruises" by Band of Skulls and it plays to about 1.20 remaining and then just stops and goes to the next song. How do you fix this?
I removed the song from the itunes library and then added it again, but the same issue still exists.
I'd report the problem to the iTunes Store, then.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
Why has my new IPad stopped saving pictures from Facebook. Worked originally and problem may have started when I downloaded OS 6.
You are correct that the behavior started when you installed iOS 6 - but as Chetan6518 explained - you now have to configure it in the settings.
Along with the suggestion above, there is also a Photos setting in Privacy and that gives access to approved apps for photos as well.
Last of all, make sure that you haven't set a photos restriction in Settings>General>Restrictions>Privacy>Photos -
I was using HeyWire to text my friends but it just stopped receiving texts from the friends in Grand Rapids, MI. So anyone can help me????
Suie,
Thanks for reaching out to us about it and we do really appreciate the feedback so that we can work on any issues that may be present. There was a period of maintenance with our servers and this is probably why you were unable to receive messages from a particular contact. I would close, and reopen the app and attemp to exchange messages with this contact. If you are still having issue please email us @ [email protected]
Thanks for using HeyWire! -
I have many songs on my iphone that play half way through and then the sound just stops, when I look at my phone the song is still playing, just no sound. Any help on how I can fix this?
Could be a defective SIM. Try a new one from your carrier.
-
Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?
In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.
-
When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, RichIn order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.
-
Why are my emails not deleting from all devices when deleted from one? I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong? Thank you.
It depends on the type of email account you are using, not on iCloud. If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices. If you are using a POP (POP3) account, it won't. (iCloud email, Gmail and Yahoo are all IMAP accounts.)
-
Print issues when going from develope to print
In LR5 when going from Develope to Print, I loose the picture and the print tab is greyed out. Never had this problem before, did I do something wrong
Make sure the source remains the same - check the filmstrip.
The only suggestion is to place the batch for editing and printing into a collection or (temporary) quick collection and access the images from there in both modules. -
Why cant i pick up 3g when away from wifi on my iphone 4
why cant i pick up 3g when away from wifi on my iphone 4
Lousy 3G coverage from your carrier maybe? What did they say when you reported the problem to them?
Maybe you are looking for
-
Having a problem with creating/using a primary key on a view
I have a problem with a primary key on a view I created the view and primary key as follows: CREATE OR REPLACE FORCE VIEW "MDD"."ROCK_LU" ("DESCRIPTION", UNIQUE ("DESCRIPTION") RELY DISABLE, CONSTRAINT "ROCK_LU_PK" PRIMARY KEY ("DESCRIPTION
-
Use multi-touch to close more than one app at a time in the multitask bar!!
Is this a new feature? I was always annoyed that I had to tap each red x one at a time to close an app on the multitasking bar, so I decided to try and tap several at a time and voilà! It works! I've been able to tap two at a time. Let me know if any
-
trying to convert from 3gs to new 4s and settings and text threads didn't transfer. Where do I find the process to try again?
-
Windows.ApplicationModel.DataTransfer. How share image and link in same post ?
How share image and link in same post ?
-
New Nintendo 3ds xl + Majoras Mask 3d (Order Status says cancelled)
Hi, I pre ordered the New Nintendo 3ds xl + Majoras Mask 3d. I got an email saying my order was recieved and Best Buy would send me tracking information on the products. However, when I check my order status it reads cancelled for both products. I di