Why is my phone displaying a pink screen and has appeared to be dead?
I tried to upload some photos today and for some reason it tried to synch with itunes and iphoto then went dead. Please tell me there is hope. How do I revert it back to working again?
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore your iPhone > iTunes: Restoring iOS software
Similar Messages
-
Why if you open multiple applications, my phone became a white screen and can not do anything
why if you open multiple applications, my phone became a white screen and can not do anything ?
Mohe2192 wrote:
i just open 3 application and than my handphone become white screen ?
That is not normal. Very few apps are actually running in the background. What troubleshooting steps have you taken? Have you reset the phone by simultaneously pressing the Home and power buttons until the apple appears? Restored from back up? Restored as new? -
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store. -
My Iphone 4 has a cracked screen and has made it impossible for me to unlock my pin. I an giving the phone to a friend but want to know if there is a way I can ensure all my data is wiped off it before I do. Can anyone help? I have upgraded to a iPhone 5 so Im not sure if the old one would have automatically wiped the old phone. I have lots of emails and messages I wouldnt want peo
Have you synced this phone, with iTunes, while the passcode was enabled? If so, plug it in, iTunes running, & hit the Restore button on the Summary Pane. This will also erase the phone.
However, if you have not synced, while the passcode was enabled, you will not be able to do this without first enereting the passcode. If that's the case, try recovery mode:
http://support.apple.com/kb/HT1808 -
Why my ipodmy ipod displays do not disconnect and wont sync but can be restored?
why my ipodmy ipod displays do not disconnect and wont sync but can be restored?
If it is a problem than I have it too. Mine does the
same as long as I don't stop the device via the
little green arrow icon (USB manager) down by the
clock.
I never really need to use the Ipod when it is hooked
into the PC because everything is done through
iTunes. I just thought it said "do not disconnect"
because it was associated with both iTunes and the PC
as a hard disk.
If I stop the device or "eject" the iPod, it goes
from do not disconnect to the normal menu tree.
So when you take the USB cable out of the iPod, it goes back to normal?
If that's what you mean, mine does that too.
It's just that I read that if you remove the USB cable from your iPod while it says 'do not disconnect', it can wipe all your music.... -
Why would my phone say that my sd card has been removed when it hasn't?
Why would my phone say that my sd card has been removed when it hasn't?
Try to remove it and plug it back in. SD cards are not the most robust things. I have had several die on me. You can try to plug it into another device and see if it's readable. If it's not, it has likely died.
-
I have this iPod Nano 6G. I try to erase and sync it. It told me that I have to restore it. My Nano displays a white screen and said that do not disconnect. I press ok in itunes and tells me error occurred 1439. What should i do? :(
Hello dreyc,
The following article provides information and troubleshooting steps that can help resolve this error.
iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
http://support.apple.com/kb/TS1372
Cheers,
Allen -
My phone keep blinking the screen and the unlocked...
hi everyone,
my phone keeps blinking the screen and locked the phone automatically. I tried to use unlocked key to unlock it, but it seems like doen't work. I happened this after updated the new firmware (v30 one) . during the update process, it didn't come out any failure message. however, when it got into the restart process , the phone starts the problem.
plz help!!!!!
I removed the battery , sim card, and memory card already,
Attachments:
10000541493262.gif 804 KBtry code number 2, make sure you back up all your data and stuff, read carefully if this does not work the only option for you is to take it to nokia care to have them have a look.
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery.... -
My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs. I reset with remote ...same result....Any ideas?
If they are the instructions I think you might have seen, they are for the Apple TV 2.
Unfortunately I think your Apple TV may have failed.
You might try removing ALL the cables for a while and trying again, but I think you may be out of luck. -
Hi
I've just reset my iPhone 4s as I was planning to sell it on. After the normal stuff you see on a reset I've been left with a phone that just has the apple logo on the black screen and it appears to be frozen and wont do anything?? any ideas?
I've tried holding down top button and round button which makes it go off but as soon as you push top button again it comes back and again its frozen.
Thanks for any ideas in advance?You need to put your iPhone into recovery mode to restore it: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?
The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
Everymac.com says:
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2*)
Details:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100. -
Display driver stopped responding and has recovered successfully
Hi everyone!
I sometimes have recently been encountering this error 'Display driver stopped responding and has recovered successfully' .
This is the version of ATI RADEON Graphics adapter.
This problem is happening recently (let me say about five months ago)
I really don't know what may be causing this problem. However, I have created a virtual machine before about only 3 days with these settings:
Host machine has Windows 7 home premium (64Bit), and the mount of memory available is as follows:
Physical Memory
Memory Usage 34 %
Total Physical 5.95 GB
Available Physical 3.89 GB
Total Virtual 12 GB
Available Virtual 9.43 GB
Guest machine has Windows 7 home prmium 64bit, and the mount of memory available is as shown below, I really needed to this RAM memory size because the Windows 7 got very slow with less than this size.
Host machine has Graphic adapter with memory size of 6GB
guest machine hat his video adapter settings below, because I really needed to this video memory size.
But, as I said I have been facing this error for about five months before VM was created. Thus, I don't think that the problem is related with VM's video display.
Also, sometime when visiting some sites containing video files needing Adobe Flash player, I was faced with that error and the browser got non-responding and then, it got closed.
It would be highly appreciated if you could help me with this.dindin wrote:
Hi Cooperator ,
As I see , your catalyst is from 2011.You can use AMD Driver Autodetect Tool.The AMD Driver Autodetect Tool is designed to detect the model of the AMD graphics card and the version of the Microsoft® Windows operating system installed in your computer. If a new driver is available, the tool is designed to help you download it. After a successful download of the driver, the tool will provide you an option to install it.
Download page:
http://support.amd.com/en-us/download/auto-detect-tool
After that ,open Catalyst control center, and set your programs to performance that you want to run.
It should solve your problem , this error comes when graphic card need more time that win register alow (about 2sec) , and with right drivers , it shoul fix it.
Wish you good luck and all the best!!!
<<<-------***
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thanks a lot,
When I tried downloading the tool from that link you provided as circled in this screen shot below
After amddriverdownload_installer was downloaded, I run it, then another wndows showed me
Then after download completed,
this show me.
I found the tool cannot be downloaded due to incompatible hardware/software on my computer,
Although tool couldn not be downloaded, there are some files in this locatin after clicking install.
As aside, this window below showed me while downloading the tool, then I don't know what let it show me.
Is it OK or should I uninstall it if it were installed
Also, AMD Gaming evolved was installed without asking my permission.
It is installed as 'Raptr.exe' in this location 'C:\Program Files (x86)\Raptr'
Also, whenever my Windows 7 got started, this windows showed me, although I didn't set any account for this, there is accont longins as you see in this screen shot belw.
This raises another question which is what created this account shown above? -
IQ504 'display driver igfx responding and has recovered'
The error message ''display driver igfx responding and has recovered' is poped up after screen turned black out repeatly.
I reinstalled the new updated Intel display driver according to HP support FAQ guide for this issue, but it did NOT work.
HP support center said to me to use recovery disk. But I already tried to return my IQ504 to the factory status which did not work also.This error is typically found in Vista, Games (or intensive graphical applications), the video hardware, and available resources. It is not isolated to any particular manufacturer other than the graphic technology used. My opinion is that onboard intel graphics seem to occur more, followed by nVidia, and then ATI.
The workaround is to reduce the amount of resources that are being used by the system. TouchSmart have more software running in the background than any other PC I know. If you are a gamer or work with a lot of graphics I would use the steps in this document to make sure the TouchSmart application removes most of itself from memory when closed.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01545946&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
You can also use this document to make your TouchSmart run cleaner - however, don't mess with Aero if you want to continue using the TouchSmart application:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00815926&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you. -
Satellite A500-1GH - display driver stopped responding and has successfully
My laptop is the A500-1GH and I bought it 2 days ago...
My problem is that for the fourth time the monitor went black and then recovered and I'm getting the message "display driver stopped responding and has successfully recovered". My graphics card is the Nvidia GeForce 330.
I would appreciate it if someone knows what should I do to fix this
Thank you in advanceHi Guys,
I have experienced _*both*_ problems with my A500/O2J with the NVIDIA GeForce GT 330m graphics card. Only purchased it Monday 15th February. Everything came factory installed except Office Professional 2007.
Set it up on Tuesday and it happened within 2 hours of set up, then again on the Wednesday. On the first 2 occurrances the display went black and recovered after a few seconds with a message along the lines of "graphic card driver has stopped responding and has successfully restored" then today (Friday 19/2) the screen went black and didn't come back on. I thought it had gone in to sleep mode but pressing the power button did nothing. After about 20 minutes I got the Blue Screen saying the system was shutting down to prevent unecessary damage and it then proceeded to restart.
I'm computer illiterate when it comes to this technical stuff and rang the place of purchase who told me to ring Toshiba (133 070). Of course being in the West they are closed so I will have to wait until Monday (1st day back at Uni).
Not off to a good start....so i hope this problem can be rectifed quickly and without too much fuss.
My computer specs are as follows;
A500/O2J
Intel Core i5 processor
Windows 7 Home premium (32 bit)
4GB memory
500Gb Sata storage
NVidia GeForce GT 330M graphics
Karmon/Kardon speakers
Everything came factory pre-installed except printer and Office Professional 2007 but both were installed after the problem occured the first time.
Message was edited by: janette73 -
[W500 and Windows 7] ati display driver stopped responding and has recovered
Hi,
I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
In the details of the driver, the following can be seen:
Driver Date: 28/04/2009
Driver Version: 8.612.0.0
The card is recognized as a 3650.
Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
Thanks in advance,
gillI have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button.
It's really annoying.
It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.
Maybe you are looking for
-
Ipod skips only with songs purchased from ITunes
My Ipod skips with a handfull of songs that I purchased from ITunes. They play fine on my laptop, but my Ipod wont play the entire song. Some play for 2 minutes others play for 20 seconds. I can't get anywhere with help topics, and I went through the
-
Hello there, i'm new on pls/sql, so i wanted to do a procedure which execute a grant select on all tables from a specific schema, the name of the schema is TESO, and i'm creating that procedure in ASILVA schema. The problem is when i try to execute t
-
Excel cannot open the file because the file format or file extension is not valid
pls help
-
Create table bulk_load as select ename from emp where 1=2
The Above Query will create a new table using the strucure of old but there will be no data.. Kindly explain me what is meant by "where 1=2"? Is it referring the table or column or for just testing the query??
-
Applicant Number Ranges are getting skipped
Hi, In my client's production server while entering initial applicant data the internal number ranges are getting skipped. For Example someone has done Initial Data Entry for the Applicant, the Applicant number generated is 40. Then in the next entry