Why is my podcast not updating correctly?

My podcast, the jaguar tapes: https://itunes.apple.com/nl/podcast/the-jaguar-tapes/id557617194?l=en&mt=2
It's not updating anymore! The new artwork isn't showing up. Also the new episode isn't in there on the correct date.
Can someone please help me out?
cheers Thom

Your feed is at http://www.mothermusic.nl/podcast/JaguarPodcast.xml
It has 13 episodes, all of which show in the iTunes Store. However episode 13 has no date and so appears out of order; the only possible reason I can see for this is that in your 'pubDate' tag you have a comma after 2014, which is strictly not correct.
The media file URL for this episode is
http://www.mothermusic.nl/podcast/Jaguar13.mp3
and there is no file at this address.
The Podcast Image appears correctly on the Store page, and the media file for episode 12 has an embedded image. There is of course no image for episode 13 when subscribing because there is no file there.
If you have a question about your own podcast (as opposed to playing other people's) it's best to ask in the Producing Podcasts forum.

Similar Messages

  • Podcast episodes not updating correctly in iTunes

    Hello,
    I am having a problem with my podcast episodes not updating correctly in iTunes.  The last 5 episodes I published appeared in iTunes at the bottom of the episode list, as if they were old episodes--i.e., they appear as if they were the first 5 episodes published.  They also do not have a date assigned to them as the rest of the episodes do.  They were not distributed to podcast subscribers, possibly because iTunes is not recognizing them as new episodes.
    Here is my podcast feed: http://ic.instantcustomer.com/instantcasts/feed/podcast/5047174b90f14efe542431c2 674b1bd9
    And here is the link to my podcast in iTunes: https://itunes.apple.com/us/podcast/small-business-marketing-minute/id896451432
    The problem began with last Wednesday's episode, which was Episode 30, and has continued ever since.  I did not do anything differently when I published that episode than I did when I published the previous 29 episodes, and those updated just fine, or at least seemed to as far as I could tell (i.e., they appeared correctly on iTunes, and appeared as a new episode for me as a podcast subscriber).  Also, after examining the rss feed, I could not see any difference between episodes 1-29 and episodes 30--34, at least as far as the way the feed was formatted.  So, I have no idea what triggered the problem, and no idea how to fix it.  If I can't resolve the issue then I think I'll have to abandon the podcast, since there's no point in publishing a podcast that doesn't distribute new episodes to subscribers. 
    If anyone can shed light on this problem for me, it would be most appreciated.     Thanks!
    -Kevin

    As you say, in the Store the latest episodes don't show a publishing date. When subscribing in iTunes, none of the episodes show a publishing date, and they are listed in the order they appear in the feed.
    In the feed, none of your episodes has a 'pubDate' tag, which is where iTunes gets the date from. Since most of the episodes in the Store have a date, it looks as if originally your episodes had this tag, but that five episodes back you did something in whatever method you are using to create your feed which removed these tags: the Store is presumably getting the dates from its cache since the episodes haven't changed, but obviously doesn't have the dates for the last 5 episodes.

  • Recordmode data are not updated correctly

    We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
    Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
    We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
    Best regards
    Theodoros

    Hi again,
    the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
    Thanks anyway
    Theodoros

  • Why exchange rate is not displayed correctly when I create the PO in SRM?

    Hi Gurus,
    Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
    But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
    Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
    But when the PO is transmitted to R/3, the exchange rate is the correct.
    My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

    Hi Muthu,
    I'm in Extended classic.
    I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
    Two checks of budget exist:
    1.- When creating PO (exchange rate date of delivery date of the SC's item)
    2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
    If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
    Now my question is: It is a standard behavior? (to take different exchange rate)

  • Windowed CLOCK does not update correctly

    My floating desktop clock [digital with date] is one hour earlier than it should be and will not update correctly on startup. The time shown is correct if I switch to the menubar version, as is the time in the time update slot on the Time & Date tab in Preferences. But the analog clock below the time update slot shows one hour earlier also. Am not sure how long this has been a problem since I haven't traveled to a different timezone in two months. At this stage in the lifecycle of Tiger, these kinds of petty annoyances should NOT be occurring as new issues.
    14" iBook G4   Mac OS X (10.4.6)   768-Mb RAM

    klimew,
    Welcome to Apple Discussions.
    Go to System Preferences>International>Formats>Times
    and explore the Customize...features.
    Since you are new to Apple Discussions, you may not
    have noticed that there is a Tiger Forum. If my
    suggestion is unproductive, you may want to repost
    your question in the Tiger Forums: Finder, Dock & Dashboard.
    ;~)
    Thanks for the info but the answer does not lie in International. It's a bug in my clock and apparently only for EDT for some cities, like New York NY (my closest city for the summer). When I switch to Ottawa Canada IN THE SAME TIME ZONE everything is OK. Weirdski.
    14" iBook G4   Mac OS X (10.4.6)   768-Mb RAM

  • Why is the map not displaying correctly on "find my phone"  I am getting large grid squares on the map

    why is the map not displaying correctly on "find my phone"  on my computer.  I am getting large grid squares on the map.  I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

    Welcome to Apple Support Communities
    It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

  • Why is my playlist not updating as i type in the search window anymore?

    why is my playlist not updating to reflect what i type on the search window anymore? just searches in the same window as you type i want it to reflect and show location on my plylist instead as it did before.

    I have code within the FLA, but I am also using .as files (with classes and such). The code does not update when I try to use it, or will not run. Currently I am getting 4 errors, all of which were related to syntax and have been fixed. I know this because I hit the check mark button at the top of code field and it confirmed that all syntax is okay. I believe the error may be due to a lack of understanding on my part regarding the source path and document classes.
    For example: I am using the code found here: http://www.learningactionscript3.com/download/45/ in the particle_system folder. My .as files and SWF are set up exactly the same as theirs, the example, but I can run theirs without error and mine with a perpetual 4 errors at runtime no matter how I fix it. I have made sure that the source path leads to the .as files being used ("Particle" and "ParticleDemo"), and confirmed that it should work by hitting the check mark next to the Document Class under Advanced ActionScript 3.0 Settings.
    Edit: So in short, yes, I run the SWF and my code not update. If I close out of Flash and open it up again with the same SWF and .as files, then it works. However, this is an extremely inefficient thing to do. I am thinking that maybe downgrading down to CS5 may do the trick, but not sure if it's worth the time.

  • Alter nate color applied in SSRS report is not updating correctly when you export to excel

    alternate color applied in SSRS report  is not updating correctly when you export to excel. Please let me know how can I resolve this issue
    Smash126

    Expression I am using report is
    =IIf(RowNumber(
    Nothing)
    Mod2 = 0,
    "Silver",
    Nothing)
    Smash126

  • ASP timeout value not updating correctly

    MS Server 2000
    MS SQL Server 2003
    Connection timeout not updating correctly.  In Enterprise Manager I updated from 600 to 900 seconds.  I had some connections issues and the solution said to modify the properties of the DB user to grant it 'write' privilege.  It solved the
    first issue but now it is timing out after 300 seconds.  After searching again I saw something about modifying the timeout for the user.  Could this be the solution and how do you do that.
    Classic ASP.  In the code I use:
    Server.CreateObject("ADODB.Command")
    Thank you in advance.

    Hello,
    You can try to using the CommandTimeout property to specify the number of seconds to wait while attempting to execute a command. For example:
    set comm=Server.CreateObject("ADODB.Command")
    comm.CommandTimeout=600
    Reference:http://www.w3schools.com/ado/prop_commandtimeout.asp
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Apple Mail read status does not update correctly

    I have one iMac running Mavericks and using Apple Mail to run three IMAP accounts provided by a local Apple Mountain Lion Server.
    It exhibits two issues:
    Firstly it fails to refresh the view automatically in the message viewer window.
    The header at the very top of the window will update live when a new message comes in so that it says "X Messages (Y Unread)" with the correct numbers. The list of messages does not update unless you switch mailboxes, then switch back again. Then they appear instantly.
    The second and more critical issue is that the read and unread status of messages is not updating correctly at all. Refreshing the view make no difference. Two of the three accounts are shared with 6 other iMacs running Mountain Lion and Snow Leopard. None of these have an issue.
    I have deleted and re-added the accounts several times, I have tried a completely clean new user account. Sometimes the first issue goes away but it returns after a short time.
    The next step would be to erase the whole Mac but I am reluctant to go to the hassle as I have a suspicion that this will not make a difference and that there is a glitch with Mail on Mavericks. I have run all updates.

    Hi Brenn,
    To narrow down the issue, we need more investigation:
    1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
    2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
    3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
    4.Please switch to online mode for shared mailbox and test the issue.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Why my ipad can not update the ios7.1.1

    why my ipad can not update the ios 7.1.1

    Hello there, crivera350.
    The following Knowledge Base article offers up some great steps for if you are unable to update your iOS device:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
    Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
    Plug the device's USB cable into your computer only.
    Hold down the device's Home button as you connect the USB cable to it.
    When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
    iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Use iTunes to restore your device.
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • Table record is not updated correctly after navigate back from detail page

    I have 2 jspx pages one (page A) has a table displaying the employee record, another one (page B) is used to update the selected employee record. On page A, when selecting a record and clicking the 'Details' button I can be navigaed to pag B on which I can modify the record information in a form component. I have one table column 'teamName' which is binding to a LOV at VO layer and on pageB I am using <af:inputComboboxListOfValues> to show a editable LOV list for this attribute, when I input a new value here and save it, I can go back to page A but the team name for this record shows empty, by querying the database I do find the record updated successfully with the changed value. And when I reloaded the page the record can show the new team name value. Why it is not updated in the employee table when immediately navigating back from page B? I have set the table iterator refresh attribut to "always" but still failed. Can anyone help on this issue? Thanks!!
    BTW, for other columns (not LOV) they are ok, the table can show the changed value correctly.
    Edited by: user774592 on Jul 14, 2011 7:56 PM
    Edited by: user774592 on Jul 14, 2011 9:59 PM

    Thanks for reply!
    I did exactly the same as what you said. I d&d the data control Commit operation on page B to generate a 'Save' commandToolbarButton with the action attribute set to 'save' which is the from outcome for navigating back to page A. Is there any business logic I need to write here? Currently I have no.
    Note: In this case I used an editable LOV, I have a requirment that besides selecting a existing value from the lov, user can also input a new value in the LOV. When going back to page A, I do find the LOV list is updated to contain the new vaule. Just the record in the table shows an empty value instead of the new value. Still do not know why.

  • Issue with my podcast not updating to subscribers

    Hi,
    I recently took over podcast duties for our podcast.  And around a month before I took over (mid-march)  I began recieving complaints that the podcast wasn't updating to subscribers.  It seems to be mostly from people using the IOS podcast ap.  I am using it myself, and I can search for the podcast and find it, but as a subscriber the podcast will not update automatcially, or aknowledge that a new podcast has been uploaded.  I am aware that it can take a few days to update from my feed, but it still should alert subscribers when a new podcast is uploaded.
    my page https://itunes.apple.com/us/podcast/branches-a-christian-church/id512745759?mt=2
    Thanks in advance for the help!

    Your feed is at http://www.themim.com/podcasts/branches_podcasts.xml
    The latest episode in it is 29 April, and this shows in the Store and when subscribing in iTunes on a Mac, so all this is normal.
    I don't have an iOS device so I'm not in a position to check if there are any problems there. Your server does handle the required 'byte ramge requests' so it ought to work OK, but if it doesn't I can only advise asking in the iPhone forum - everything in the feed seems to be correct.

  • VO with bind variable defined in SQL is not updated correctly

    Hi Experts,
    I have one simple question here, could you please help answer? Thanks a lot!
    I have 2 pages, the first page displays an employee table, the second page shows some details related to the selected employee. When select one employee and click on the detail button I can be naviaged to the second page and see the details for the selected employee. The vo used on the second page uses a bind variable called "empId" which is binding to a pageFlowScope value 'adf.context.pageFlowScope.empId', and this pageFlowScope value will be populated to the selected empId in detail button actionListener at runtime).
    The question here is, now the first navigating is ok, the detail page can show the correct information for the employee selected on the employee page, but when navigating back and choosing another employee, and then click on the detail button again, the detail page is NOT updated, it still shows the first selected employee information. I do debug the actionListener in the backing bean and the second selected empId does get passed to pageFlowScope.empId, the bind variable in the VO should get the new value, right? but why the second page does not get updated (query using the new bind variable value)?
    Thanks!
    Edited by: user774592 on Jul 20, 2011 11:13 PM
    Edited by: user774592 on Jul 20, 2011 11:15 PM
    Edited by: user774592 on Jul 20, 2011 11:15 PM

    Hi Timo,
    Thanks for you response! The JDev version I used is 11.1.2.0.0. Actually, they are different VOs, the 1st page is EmployeeVO, the second page is ResourceSummaryVO which binds the empId variable in SQL. The ActionListener code is as below.
    public void viewResSummary(ActionEvent actionEvent) {
    // Add event code here...
    DCBindingContainer bc = (DCBindingContainer)this.getBindings();
    DCIteratorBinding empIteBinding =
    bc.findIteratorBinding("SEmployeeView1Iterator");
    //Get employee id from the current selected employee record
    Row currentRow = empIteBinding.getRowSetIterator().getCurrentRow();
    Long employeeId = ((DBSequence)currentRow.getAttribute("EmployeeId")).getValue();
    //Set employeeId as a pageFlowScope object which will be used in ResourceSummaryPage
    AdfFacesContext.getCurrentInstance().getPageFlowScope().put("empId", employeeId);
    empId is defined using Bind Variable Dialog and is referenced in ResourceSummaryVO on the second page. I used the EL expression to defined its value to adf.context.pageFlowScope.empId which will be populated using above code at runtime.
    Again, thanks for your help!

Maybe you are looking for