Why is my project defaulting to 60p when all my clips are 23.98?

And how do I fix it?
Thanks!

Hi, all clips have the same size and frame rate. They were all shot on the Red Epic in 5k 23.98 and transcoded via Redcine X to Apple ProRes 422 HQ

Similar Messages

  • Confused why my video exports at 640x480 when all the clips are 1280x720

    All of my clips are from a canon 7d shot at 1280 60fps mostly surfing so I can slow it down. I added one clip which is at 640 to the project and when I exported the project in H.264 or any other setting it is only at 640. So I went back removed the clip and tryed to export again and it still only does 640 even though all the clips are now at 1280. I would hate to have to edit all over again. Thanks for any help.

    Thanks I realized I can click the wrench at the bottum right of the inspector box and change the properties back to 1280 so that helped but I couldn't change the FPS they are stuck on 30 not the end of the world. I think I must have accidently put a 640 clip as the first clip when I dropped into the timeline and even though I deleted it, it kept everything at that setting . It would be nice if you could change the properties after the fact.

  • I am using final cut express. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the tran

    I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
    Is there some glitch in final cut express that only allows short clips to be transferred in full?

    Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
    By the way, the other reply I received suggested the following:
    In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
    I did this and it was already unchecked. So this is not the answer...
    The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min)  the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
    I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
    ANSWERS
    how you are ingesting the files
    From external flash drive connected directly to mac using FCE.
    the format of the source footage
    digital via ext flash memory. Frame size :1929X1080 / 25fps
    what camera shot the footage
    SONY HXR NX5
    how you are connecting to the computer
    from flash memory directly via usb
    what version of FCE you are using
    4
    what OS your computer is running
    10.6.8
    what model Mac
    macbook Pro intel Core i7
    what drive you are using for Capture Scratch
    3TB external drive (plenty of room left)

  • Email submit button causing required error when all required fields are filled in

    It looks like if I have more than 1 instance of subform  added,  my email submit button triggers "..at least one required " error message when all required fields are filled-in.
    I toggle subforms between "visible" and "hidden (from layout)".  Any suggestion is appreciated.
    ralph

    The fields that are hidden should have the validate.nullTest property set to "disabled", something like;
    TextField1.validate.nullTest="disabled";

  • HT1338 When all your apps are ⊥o ⊥he la⊥es⊥ versions, how do you manage if ⊥here is an upda⊥e if your apps are no⊥ recognized in AppS⊥ore because you have changed your iMac compu⊥er?

    When all your apps are ⊥o ⊥he la⊥es⊥ versions, how do you manage if ⊥here is an upda⊥e if your apps are no⊥ recognized in AppS⊥ore because you have changed your iMac compu⊥er and you have made a da⊥a ⊥ransfer of ⊥he whole sys⊥em and apps? When you own only one compu⊥er (excep⊥ an iPhone).

    Make sure you are signed in with your Apple ID. Try reindexing Spotlight.
    Spotlight – Re-index

  • How can you reinstall SL on a older mini, I just upgraded to Lion .Since I downloaded it, I made a disk copy for the future  when all the kinks are work out. But would really like to go back to SL for now. I tried my reinstall disk, which didn't work.

    I have an older Mac mini  using SL as my last upgrade and really like it.. Just last week I upgraded to Lion, and do not like it,,,I would like to reinstall SL but do not know how to go about it,,,I did burn a copy of Lion and will reinstall it when all the kinks are worked out..Can someone tell me how uninstall Lion and reinstall SL.....Thx

    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • When using Tab Groups, is less power/memory used or is it the same as when all the tabs are opened in the task bar?

    When using Tab Groups, is less power/memory used or is it the same as when all the tabs are opened in the task bar?

    it's just another View for your tabs which needs less *space* in the taskbar, but same *memory* of your computer.
    exception: if you (re)start FF and restore the last session (with lots of tabs/groups) there is an option in FF-Settings to load the (content of the) tabs only as soon as they are clicked, and not as soon as FF starts. That trick saves memory.

  • Can I apply any application patch when all application services are down?

    Hello All,
    Can I apply any application patch when all application services are down?
    Reg
    Chirag Patel

    Definitely you can. On some operating system (like Windows), if relinking is part of the patch then you cannot apply patches unless Application services are down.
    Whenever we apply a patch, we enable maintenance mode through adadmin, this would stop users from accessing the application during patch installation. However, you still can use "adpatch options=hotpatch" to apply a patch without enabling maintenance mode.

  • Why can't I separate audio tracks when I import clips from an sd card into FCP 7

    Why Can't I separate audio tracks when I import sd card files into fcp 7?

    You need to ask this on the Final Cut Studio forum
    http://discussions.apple.com/forum.jspa?forumID=939

  • When all Task's are completed also complete the Phase (PPM 5.0)

    Dear gurus;
    I need to know if the Project Phase can completed automaticaly, when all phase  task's are completed.
    Someone did this in PPM 5.0?
    *Project Definition
    Project Phase
    Task 1
    Task 2
    Task 3
    Best regards,
    Mariano.

    Hello Mariano Sabiche,
    I have done this in previous versions but I don't think there is any difference in PPM 5.0 in this functionality. This can be achieved by implementing automated workflows by using the triggering events or status change actions.
    So depending on the details of your scenario:
    1. You may trigger this automated workflow upon the status change of the last task in the phase.
    2. You may use "relationships" between various tasks and look for the last task to be executed and then trigger the workflow.
    Hope this helps.
    Please let me know if you need any further details.
    regards
    N K

  • How to recover database when all redo logs are losted

    pls help me in recovering the database when all the redo logs are losted

    In both cases he has to open the database in RESETLOGS option. So try:
    recover database until cancel;
    Then cancel the recovery, and
    alter database open resetlogs;
    If you want to check where your database is at then mount your database and issue:
    select group#, sequence#,first_change# from v$log;
    This will tell you the sequence and SCN of all the online log files then compare it with what it prompted when you issued recovery command.
    Daljit Singh

  • How to remove event listener when all the MoviClip are off the stage

    Hi i am newbie to as3,
        I am creating animation using as3 in which i duplicate the circle ten time,then pushing into an array and giving random motion. When all the duplicate object goes outside the stage then i should remove the event listener. But right now when one duplicate object goes off the stage the event listener is removed. Thanks in advance

    //---------code for creating random bubble movement------//
    var bubbleNo:Number = 10;
    var vx:Number = .3;
    var vy:Number = .5;
    var bubbles:Array = new Array();
    var bubbleRadius:Number = 9;
    var myColor:ColorTransform = this.transform.colorTransform;
    init();
    function init():void {
    for(var i:Number = 0; i<bubbleNo; i++){
              var bubble = new newBall();
    bubble.x = Math.random() * stage.stageWidth;
    bubble.y = Math.random() * stage.stageHeight;
    //bubble.color = Math.random
    //trace("bubble.x=="+bubble.x+"bubble.y=="+bubble.y);
    bubbles.push(bubble);
    myColor.color = Math.random() * 0xFFFFFF
    bubble.transform.colorTransform = myColor;
    addChild(bubble);
              addEventListener(Event.ENTER_FRAME,createBubble);
    //addEventListener(Event.ENTER_FRAME,createBubble);
    function createBubble(event:Event):void{
    for(var k:Number = bubbles.length-1; k>0; k--){
              var bubble = (newBall)(bubbles[k]);
              bubble.x += vx;
              bubble.y += vy;
              if(bubble.x - 18 > stage.stageWidth || bubble.x + 18 < 0  || bubble.y - 18 > stage.stageHeight || bubble.y + 18 < 0){
                        removeChild(bubble);
                        bubbles.splice(k, 1);
                        //trace("out"+bubbles.length);
                        if(bubbles.length <= 0 );
                                  removeBubble();
                                  trace(bubbles.length);
                                  //removeEventListener(Event.ENTER_FRAME,createBubble)
                        trace("all Bubbles cleared");
                        function removeBubble():void{
                                  removeEventListener(Event.ENTER_FRAME,createBubble)

  • Why do Captivate projects have video issues when viewed on an iPad?

    I poste dthis question months ago, and didn't get much in the way of a response, so I am trying again...
    I am publishing projects to be viewed on both PC and iPad (.swf and HTML5).  The PC version works fine on a number of different browsers.
    The iPad version does not play correctly.  I have tried the default Safari browser, as well as Coast, Mercury, and Chrome.
    Slides that are audio over screen captures do not play the audio.
    Slides that are Video play and sound fine.
    Slides that are audio dropped onto the slide play fine.
    My Captivate is version 6.0.1.240.
    My iPad is running iOS 7.1 (11D167)
    Also, when in a project, and I try to "Edit Video Demo", Captivate locks up, and must be closed by the Windows Task Manager.  IS THIS RELATED???
    Any thoughts?
    Thom T.

    I am having the same issue with Captivate 8. I have created a project, imported mp4 movies, save output as HTML.
    All works fine on a desktop or laptop.
    But will not play videos through a browser on an IPAD. I understood that videos and captivate content rendered in HTML5 would play on an IPAD.
    Am I doing something wrong?
    Any help suggestion please?
    Thanks
    Ian

  • WHY is iMovie cropping 640x480 MPEG4 video when I drag clip to project?????

    I don't think I am trying to do anything fancy.
    My Sanyo camera takes VGA resolution video in MPEG-4. When I start iMovie '09 it asks me if I want to import the clip once I pop the SDRAM card in the USB slot. OK. I import the clip. iMovie checks for stabilization. Fine. After the clip is imported I run it and it looks fine.
    I create a project and select standard aspect ratio. I select a clip from the imported video and drag it to the project window. The clip appears but I lose about 30% of the frame area around the frame because it's been cropped by iMovie.
    I check HELP and locate the Project Properties... menu item and under "Timing" I set Initial Video (and Photo) placement to "Fit in frame". I click OK and retry placing a new clip in the project - SAME PROBLEM. I test an exported clip and the clipping is really there in the exported video clip.
    The control settings in iMovie '09 do not seem to work with cropping control. Is there a rather large bug in iMovie or did I miss something obvious? It's just a 640 x 480 video. I would have thought it would be amongst the most common frame sizes aside from 320 x 240 outside of mobile phone video clips.
    Thanks in advance for your help.
    Mike

    aaaaaah, what a relief! I thought I had unwittingly messed up some weird setting. I have to say iMovie is not really geared to the layman. I would never have guessed zooming had anything to do with stabilization.
    AppleMan1958, thank you so much! That fixed it completely!!! Now I can send off my video clip and go to bed!
    Mike

  • If I move a picture from one project to another in aperture why doesn't the jpeg change folders if all my pictures are referenced?

    I started importing all my pictures into Aperture and have been debating whether to use a managed or referenced library.  I'm leaning toward referenced, but before import everything that way, I do a couple of "test drives".
    In Aperture, I moved a photo from one project to another expecting that the jpeg in finder would move from the original folder to the new one, but it didn't.  Anyone know why?  Is there a way to make this happen?  Is it bad that I want this to happen?  Should I just use a managed library.  I like having control of the actual files (thus wanting to go with a referenced library).
    Any thoughts?
    Mark

    In Aperture, I moved a photo from one project to another expecting that the jpeg in finder would move from the original folder to the new one, but it didn't. 
    Mark, Aperture does not store the originals organized by project, but by the date of the Import Session. So moving an image to a different project will not change, were the original file is stored.
    This has a big advantage for backing up the originals. If they never move or change, you do not have to backup the originals other than directly after importing, if your library is referenced. And even incremental backups of a managed library are quicker.
    Is there a way to make this happen?
    You can always use the command "File > Relocate" to move the original files anywhere you want.
    Is it bad that I want this to happen?  Should I just use a managed library.  I like having control of the actual files (thus wanting to go with a referenced library).
    If it is bad, will depend on why you want to have control of your originals. If you just want to know where they are, it is o.k., or if you don't have enough space on the drive with the library and need to split the library across several drives. But it would be bad to move, edit, or access the referenced originals in any way. Let Aperture do the handling,  or you will be risking broken references.
    Aperture has several buil-in ways to show you the original: The "M" key will switch the Browser to the original, "File > Export > Original" will give you an exact copy of the original, or you can relocate the file to another folder.  I simply open the aperture Library in iPhoto, when I want to view my managed originals. iPhoto has a command "File > Reveal in Finder > Original" that will show you also the managed originals in the "Masters" folder inside the Aperture/iPhoto Library package.
    You may want to have a look at Terence Devlin's User Tip:                  How do I access my Photos in Aperture?
    Regards
    Léonie

Maybe you are looking for