Why is my raw files from my Nikon D5300 completely overexposed in Apertue 3 but ok in View NX 2? Do I just have to wait for an update/patch from Apple?
Can anyone answer the above question?
Thank you.
Are you shooting RAW and using in-camera settings, like Active delighting in your Nikon? Then the RAW files will appear in Aperture very different from the JPEG previews that your camera is showing you, and also from the results in Nikon's own software.
Don't use in-camera setting, if you are shooting RAW, because Aperture will show you the naked RAW file, without any effects applied.
See Keith Barkley's user tip for a full explanation:
The Big Three: Setting your camera for the best Aperture RAW results
Just in case, that your images are not only overexposed but also desaturated , have a look at this thread:
Aperture corrupting RAW images
Similar Messages
-
Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.
In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it. -
I cannot get Elements 12 to recognise and load NEF files from my Nikon D5300. I have downloaded and installed the latest DNG coverter software 8.7.1 but Elements still refuses to load any NEF files.
regards Ian.Hi,
You shouldn't need to use the DNG converter unless you are using the MAC app version. The D5300 should be supported by Camera Raw 8.3 which should be compatible with Photoshop Elements 12.
In the editor go to Help -> About Plug-in -> Camera Raw to see which version you have loaded. The latest for Photoshop Elements 12 is 8.5. If you have an older one then go to the Help menu and select Updates.
If you are up to date, then you may have use old Nikon software to access the NEF files and that is known to corrupt them so that Photoshop Elements can't read them.
Brian -
Lightroom changes colour in my RAW files captured with NIKON D300
Dear All! Lightroom changes colour in my RAW files captured with NIKON D300. Some of the images are completely ruined. I am sure Adobe must be aware of this problem. What could be done? Is there a solution? Many thanks for your help. Regards, Stanislav
You want "something different" but this "something different" is quite hard to define.
I want a result which reflects the result on the camera. Have the feeling the display
of the D800 is not the greatest, at least (not only the color issue which is often discussed)
but also the exposure. Often I think I would need to compensate it, but then afterwards
on the computer the non corrected version looks most of the time better.
I think its interesting to see how allergic people react when the word jpeg comes up.
This is also just a rendered result, just by the camera. There are many options in my cam.
I like the vivid setting with some modifications. And that gives me a result I like.
And if I like the result, why shall I spend way more time to replicate it?
I do not talk about that I would want the jpeg, I only say that what I get color wise out of the
box is how I would like to look at it. I still want the capability to fix for example exposure in image,
but I want the base the version I got from the jpeg view (or how the Nikon raw software could do).
On Lightroom I did not manage to have a profile that looked as appealing to me.
It also consumes way more time in my workflow to fix all pictures manually and results might differ.
To work on an image you need a starting point, I do not say the jpeg look is always perfect and
what I want all the time, but most of the time it is.
You say yourself you use profiles. So why should there not be a profile which automatically adjusts to the camera settings.
Its so frustrating to see a look which you like (the preview image when the pic is first accessed) and
then Lightroom switches to its own rendering which is flat and which I do not like.
For me its clearly something Adobe and/or Nikon should fix, like the mentioned "auto correct to preview look",
Nikon profiles/settings/raw-details in Lightroom or for example a Nikon import module. -
I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS. I heard there was a plug-in to download for this, but cannot find it. Help?
You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
The DNG Converter can be found, here:
http://www.adobe.com/downloads/updates.html -
When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.
Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
Also what is the version of ACR in the title bar?
Gene
Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved". -
Hello, bridge CC 2014 is not able to show RAW files of my Nikon D4s. What can I do about it?
Make sure the Adobe Camera Raw (ACR) Plug-In is updated to ACR 8.6.
That camera has been supported since ACR 8.4. -
So... how long do we have to wait for a RAW update for the Nikon D600 camera?
Adobe releases Camera Raw every 3 or 4 months. The D600 itself was launched only about 1 week ago. I'm sure its not included in ACR 7.2 RC yet. Nikon J1 is included though. I guess you're gona have to wait for it. Maybe 7.2 final release will have it or 7.3 should. Adobe employees/ product team will not commit to a time for Camera Raw releases.
However, you can use the software Nikon would've given you to convert your images as TIFF and import them into Lightroom/ Photoshop if you're in a hurry. It would be nice if your camera supports DNG conversion out of the box! This way, you wont need a Camera Raw from Adobe.
Anyway, you could file a 'Feature Request' to Adobe here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Good luck. -
Nikon D5300 images overexposed on import
When importing RAW images from my Nikon D5300 into Aperture they are all well overexposed.
The images are perfectly exposed in JPEG format and on camera playback.
I have installed all available updates, in particular Digital Camera RAW update 5.02 for the D5300 to no avail.
Same problem occurs in iPhoto.
Is this just a bug and I have to wait for a fix?Are you using any in-camera settings? Then check Keith Barkley's User Tip:
The Big Three: Setting your camera for the best Aperture RAW results
Another work-around for overexposed Nikon D5300 raws has been reported in the iPhoto Forum: Try the 14bit TIFF format: See this long thread: https://discussions.apple.com/message/24517562#24517562 -
Why my Firefox always lack and why I have to wait for minutes to open a page?
Dear customer support officer,
Why my Firefox always lack after I have update with Window 7 Service Pack 1? ... and why I have to wait for minutes to open a page?
I discovered from the "Task Manager", every time when Firefox is lack, it took up 100% of my "CPU Useage".
Below, kindly find my version spec for your investigation convenience. Many thanks in advance for your prompt support : )
Sincerely yours,
Charmayne
Application Basics
Name
Firefox
Version
5.0
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.852
true
[email protected]
Java Console
6.0.20
true
{CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
Java Console
6.0.22
true
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
true
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
true
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
true
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
RealPlayer Browser Record Plugin
14.0.3
false
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Modified Preferences
Name
Value
accessibility.blockautorefresh
true
accessibility.typeaheadfind
true
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.google.com/webhp?hl=en
browser.startup.homepage_override.buildID
20110615151330
browser.startup.homepage_override.mstone
rv:5.0
browser.tabs.loadInBackground
false
dom.disable_open_during_load
false
extensions.lastAppVersion
5.0
keyword.URL
http://mystart.incredimail.com/?loc=ff_address_bar&a=ICetqQnqJ0&search=
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1311818987
places.history.expiration.transient_current_max_pages
64401
places.last_vacuum
1298980389
print.print_printer
Microsoft XPS Document Writer
print.printer_Microsoft_XPS_Document_Writer.print_bgcolor
false
print.printer_Microsoft_XPS_Document_Writer.print_bgimages
false
print.printer_Microsoft_XPS_Document_Writer.print_command
print.printer_Microsoft_XPS_Document_Writer.print_downloadfonts
false
print.printer_Microsoft_XPS_Document_Writer.print_edge_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_left
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_right
0
print.printer_Microsoft_XPS_Document_Writer.print_edge_top
0
print.printer_Microsoft_XPS_Document_Writer.print_evenpages
true
print.printer_Microsoft_XPS_Document_Writer.print_footercenter
print.printer_Microsoft_XPS_Document_Writer.print_footerleft
&PT
print.printer_Microsoft_XPS_Document_Writer.print_footerright
&D
print.printer_Microsoft_XPS_Document_Writer.print_headercenter
print.printer_Microsoft_XPS_Document_Writer.print_headerleft
&T
print.printer_Microsoft_XPS_Document_Writer.print_headerright
&U
print.printer_Microsoft_XPS_Document_Writer.print_in_color
true
print.printer_Microsoft_XPS_Document_Writer.print_margin_bottom
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_left
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_right
0.5
print.printer_Microsoft_XPS_Document_Writer.print_margin_top
0.5
print.printer_Microsoft_XPS_Document_Writer.print_oddpages
true
print.printer_Microsoft_XPS_Document_Writer.print_orientation
0
print.printer_Microsoft_XPS_Document_Writer.print_pagedelay
500
print.printer_Microsoft_XPS_Document_Writer.print_paper_data
1
print.printer_Microsoft_XPS_Document_Writer.print_paper_height
11.00
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_type
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_size_unit
0
print.printer_Microsoft_XPS_Document_Writer.print_paper_width
8.50
print.printer_Microsoft_XPS_Document_Writer.print_reversed
false
print.printer_Microsoft_XPS_Document_Writer.print_scaling
1.00
print.printer_Microsoft_XPS_Document_Writer.print_shrink_to_fit
false
print.printer_Microsoft_XPS_Document_Writer.print_to_file
false
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_bottom
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_left
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_right
0
print.printer_Microsoft_XPS_Document_Writer.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.default_personal_cert
Select Automatically
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce G102M
Vendor ID
10de
Device ID
0873
Adapter RAM
512
Adapter Drivers
nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version
8.15.11.8631
Driver Date
7-1-2009
Direct2D Enabled
Blocked on your graphics driver. Try updating your graphics driver to version 257.21 or newer.
DirectWrite Enabled
false (6.1.7601.17563, font cache n/a)
WebGL Renderer
(WebGL unavailable)
GPU Accelerated Windows
0/1upgrade your browser to Firefox 8 and check
* getfirefox.com -
I recently had to completely restore my laptop, so I lost the music on my itunes. It's still on my iphone, but how can I keep the music I already have and continue to add more music from the newly set up itunes again? Is there actually a way to do this? I can't help but wonder what the stupid icloud is for if my music is still somewhere in the 'cloud' but it's zero help for restoring music when it's lost on a computer....any help even a site that get's around apple would be great!
It has always been very basic to always maintain a backup copy of your computer.
Have you failed to do this?
If so, not good, you can transfer itunes purchases from the iphone to your computer. File>Devices>Transfer Purchases
You can also redownload some itunes purchases in some countries:
Download past purchases - Apple Support -
i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.
Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
I have just bought a new I pad Air and I tried to add to my I tunes account and it said I have to wait for 90 day why?
also I cant play any music from my libery when my computer is not logged into I tunes Help PleaseHave you already logged into one account on it and used iTunes Match, automatic downloads and/or download past purchases from that account ? If you have then it will be associated to that account for 90 days, as mentioned on the page that you posted from. If you can't wait for the 90 days to complete then you can try contacting iTunes Support and see if they can remove the association : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?
See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2 -
When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.
Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.
Maybe you are looking for
-
Mini DVI to Video converter, red tinge
I recently bought a macbook, and so far I'm very satisfied with it (aside from the heat problems, which aren't that bad imo.) A few days ago, I recieved a Mini-DVI to Video converter in the mail to use with my six-year old television. Previously, I h
-
Who can solve my problem?
Is there some tooling, app that can monitor, report what apps at what time are using connectivity by Internet/WLAN, MMS, packages? I've got a problem: blocking all the connectivity or setting it to manual, still I found on a daily basis, almost alway
-
What does "You do not have sufficient access privileges" mean?
Hello Gurus! I am wondering what does "You do not have sufficient access privileges" mean? I have a G$ with 2 internal hard drives. One has OSX 10.3.9 loaded on it and the other has OSX 10.4.7 loaded on it. When I boot up in 10.4.7 and try to access
-
Lightroom and Photoshop stopped working when I switched from Lightroom5 to LightroomCC.
I am getting a missing dll (MSVCR110) error. How do I fix this problem.
-
Brand New DUAL 23inch monitors HELLLLP!!!
Hello All, I have a dual quad core mac pro with 8 gigs of ram and two 23inch monitors..my primary monitor seems fine but my secondary one is sometimes flickering in certain secitions and color will not match no matter what i do...if i open somethin t