Why is my screen blue?
Well I was driving down the road and I look at my Ipod and on the main menu, the screen is blue behind where the words are, for example behind Music Photos Videos etc. Does anyone know how to change this back to the normal white background? Please Help..
Try a reset.
For how to do a reset... http://docs.info.apple.com/article.html?artnum=61705
Similar Messages
-
why does my screen turn blue and freeze every time i try to plug in my 'mini display to hdmi' cable into my thunderbolt port in order to use an external monitor? it only works if i turn the computer on with it already plugged in.
Do you have gfxCardStatus installed? Is your monitor set to "Integrated" or "Discrete". You want it set to Discrete to drive the external HDMI display.
Try resetting the PRAM and SMC
<About NVRAM and PRAM>
<Intel-based Macs: Resetting the System Management Controller (SMC)>
Are you sure you have a good miniDisplayPort to HDMI cable?
Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input. -
Why is there a blue line on my screen?
why is there a blue line on my screen?
Please post a screen shot of your display. It will help to determine what needs to be done.
Ciao. -
Why does my screen turn black when I play iTunes while working on iPhoto?
Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
It would be nice if I could solve this problem once and for all.
Thanks in advance for all the suggestions. I truly appreciate your help.
JanThat was easy. Thanks. Jan
Interval Since Last Panic Report: 1949305 sec
Panics Since Last Report: 1
Thu Feb 6 15:29:32 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807867b470 : 0xffffff8000220792
0xffffff807867b4f0 : 0xffffff80002c4794
0xffffff807867b6a0 : 0xffffff80002da55d
0xffffff807867b6c0 : 0xffffff7f81d89ff3
0xffffff807867b800 : 0xffffff7f81d8a694
0xffffff807867b890 : 0xffffff7f81d8b4ed
0xffffff807867b8d0 : 0xffffff7f81d472a1
0xffffff807867ba40 : 0xffffff7f81d8bd6d
0xffffff807867bb00 : 0xffffff7f81d44346
0xffffff807867bb60 : 0xffffff8000655f3e
0xffffff807867bb80 : 0xffffff800065681a
0xffffff807867bbe0 : 0xffffff8000656fbb
0xffffff807867bd20 : 0xffffff80002a3f08
0xffffff807867be20 : 0xffffff8000223096
0xffffff807867be50 : 0xffffff80002148a9
0xffffff807867beb0 : 0xffffff800021bbd8
0xffffff807867bf10 : 0xffffff80002af140
0xffffff807867bfb0 : 0xffffff80002dab5e
Kernel Extensions in backtrace:
com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
BSD process name corresponding to current thread: iPhoto
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 11526391261403
last loaded kext at 23020191300: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver 13 (addr 0xffffff7f8254c000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AGPM 100.12.75
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.GeForce 7.3.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBOHCI 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6 -
Why does the screen on my iPad mini start jumping--larger, smaller--can't close apps. I reboot and still it happens. Any suggestions?
If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
Why iTunes artwork screen saver no longer works with OS 10.7.2?
Why iTunes artwork screen saver no longer works with OS 10.7.2?
Same problem here.. Can't figure it out.. anyone?????
-
Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac?
Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac? If not, what are the alternatives?
JimbobT
ChromaKey, GreenScreen Key, and BlueScreen Key are not included in Premiere Elements Mac.
Some suggest Videomerge as the alternative. I do not. But Videomerge is not THE alternative.
Instead, I prefer the Difference Matte as a substitute for the 3 absent keying effects. Please check out my blog post on that which includes
the how to.
http://atr935.blogspot.com/2013/05/pe11-difference-matte-as-substitute-for.html
The suggestion has met with good results according to the feedback that I have gotten to this.
I am strictly a Premiere Elements Windows user who does not prefer Videomerge even in Windows.
Please review, consider, and let us know the outcome.
Thanks.
ATR -
Why is my screen flashing a file folder with a question mark?
Why is my screen flashing a file with a "?" in it?
There are several possible reasons. Click here and follow the instructions; if the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk.
(120982) -
Why is the screen in my liquify page blank/white? I used to be able to see the picture
Why is the screen in my liquify page blank/white? I used to be able to see the picture I was working on but now it just shows a white page... I have photoshop CS4. How do I fix it?
are you zoomed in too far to see that part of the layer that has content? Does the layer you have selected definitely have content? Try using Ctrl/Cmd 0 to zoom back to fit to screen.
-
Why does the top button always brake why as my screen decided to pop off why is the back of my case bending when I have never dropped it why dose this shity phone keep sending text messages as picture messages this is the worst phone av ever had!!
I know a lot of people with iphone 5 and have never heard them complain about top button always brake and screen that decides to pop off or the back of their case is bending.
That sounds like a phone that has been dropped a numerous times. -
In OO ALV why we require screen in that container?
Hai Experts,
I have a doubt why we require screen to be display data using container,
in Function module alv we dont reqiure the any containter to display the data.
pplz Help me experts.
thanks in advance.Hello
Why do you thing you do not need any container for fm-based ALV lists?
Have a look at fm REUSE_ALV_GRID_DISPLAY_LVC:
if i_screen_start_column is initial and
i_screen_start_line is initial and
i_screen_start_column is initial and
i_screen_end_line is initial.
gt_grid-flg_popup = space.
call screen 500. " <<<
else.
gt_grid-flg_popup = 'X'.
call screen 700 " <<<
starting at i_screen_start_column i_screen_start_line
ending at i_screen_end_column i_screen_end_line.
endif.
ENDFUNCTION.
Both screen (500 and 700) contain a custom control element (GRID1) according to the element list.
Why do you thing in class-based ALV we do not need any containers?
In case of class CL_SALV_TABLE it looks like that CL_SALV_FULLSCREEN_ADAPTER is one of the classes responsible for displaying ALV lists. Looking at method IF_SALV_ADAPTER~SET_METADATA you will find the following fm-call::
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
* I_INTERFACE_CHECK = ' '
i_bypassing_buffer = l_bypassing_buffer
i_buffer_active = l_buffer_active
i_callback_program = 'SAPLSLVC_FULLSCREEN'
i_callback_pf_status_set = 'SALV_PF_STATUS_SET'
i_callback_user_command = 'SALV_USER_COMMAND'
* I_CALLBACK_TOP_OF_PAGE = ' '
This fm belongs to the same function group SLVC_FULLSCREEN like the fm I have mentioned first. And this fm uses the same screens (500 & 700) with the GRID1 custom control.
Regards
Uwe -
Why does my screen come up dark when I press the camera icon?
Why does my screen come up dark when I press the Camera icon? I can neither take pictures nor look at the photos I have saved.
Doulbe tab the home key to see the task bar. Touch and hold any of those icons until they jiggle, then delete them by touching the minus sign. Then reboot the pad by holding the sleep and home buttons until the apple logo appears. Ignore the red slider.
You either have another app open that is using the camera, or you just have too much stuff in memory. The reset process should clear it up. -
Why is my screen zooming in all the time? and what can I do to prevent it?
Why is my screen zooming in all the time? and what can I do to prevent it?
Press the key combination option-command-8 to disable Zoom. If you're using an Apple wireless mouse, open theMouse pane in System Preferences and uncheck the box marked Smart zoom.
-
Why does my screen flicker every 10-15 seconds?
Why does my screen flicker every 10-15 seconds?
like a blinking? do you have the late 08 MBP?
if so go to system, energy saver, and select better performance. Your screen should be flicker free. -
Why does my screen have a circle with contact name
why does my screen have a circle with contact name
it might be the recents feature showing up on the home screen, this can be switched off.Once you’ve completed the upgrade to iOS 8, head to Settings > Mail, Contacts, Calendars. Scroll down until you see the Contacts section and tap on Show In App Switcher. Here you’ll see the options for displaying contacts in the app switcher screen: your iPhone favorites, your recent contacts, or both. Note that if you enable both favorites and recent contacts, your favorites will be displayed first, and you’ll have to scroll to the right to see your recent contacts.
Maybe you are looking for
-
2 lines on family plan now, if we add a third, can we remove one of the other two?
My husband and I have a 2 line family share plan with standard phones (sharing 700 mins/month w/ unlimited text). I'm eligible for an upgrade now (primary line), and he has to wait until June. Our contracts both expire in October. We both want to
-
Counter column in the Receiver file
Hi All, My requirement --> Souce is IDOC and target is a file. In the Receiver file there is one column counter which will indicate the counter for each line... So the Receiver file should be like this FHEAD,0001 THEAD,00002,00001,20081103 TDETL,0003
-
How to check that exception is not thrown for particular exception alone
Hi, I want to check for Exception but I don't want it to throw exception when it is java.net.SocketException. I want to throw message for all other exception. Please let me know how to implement it. Thanks & Regards, Nasrin.N
-
I've used Canon's CameraWindow software for years to import large quantities of photos direct from my SD card, specifically because it renames the files based on date taken and nicely orgnizes them into folders. I save those to an external HD and im
-
Plsql that send an asp page to a determine ip server
hi, i would like to know how i can send an asp page to a determine ip server, with a plsql procedure. My plsql procedure should start, when an e-mail come to my server and read it the plsql procedure should send my asp page. thnkz MC