Why is my "sender address rejected by mail server" where do i look to fixzzz/

why is my "sender address rejected by mail sercer"  where do i go to fix?

Without knowing the sender address, it's impossible to say why it was rejected. Was the address in the proper format; did you type it in yourself, or did you use one stored in Address Book?
Be more specific and cite the exact text of the error message (but don't include the actual email address) in your reply.

Similar Messages

  • Sender address rejected by the server

    Stupidly, I tried to send an email to everyone in the address book without splitting them up into smaller groups. I think I have been flagged as a spammer. This is the error message I get:
    This message could not be delivered and will remain in your Outbox until it can be delivered.
    The sender address [email protected] was rejected by the server.
    I am unable to send any emails from Mail. How do I resolve this???

    It looks like you've exceeded the .Mac sending limitations, as described in the following article:
    .Mac: Email Account Specifications
    The problem should fix itself by just letting enough time to pass so that you're within the limits again.

  • Sender address rejected by server smtp.freeserve

    I have minimal [Read NO] understanding of how this all works so please bear that in mind.
    Recently I have been trying to send emails from the Mail App on the iMac version 10.6.8. (I'm guessing that's snow leopard).
    I keep getting the message: sender address rejected by server smtp.freeserve.co.uk.
    I do not understand why this is happening.
    My accounts and mail are all connected and logged in to the internet/server, there are no mistakes in my
    email address or anything so I just don't understand what could possibly be going on.
    Please help, I need possible problems (and explanations) and I definitely some possible solutions.
    Thank you so much in advance.

    You shouldn't post an e-mail address in a public forum.
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Exchange 2010: Sender address rejected: Access denied

    hi friends
    i have been recently experiencing an issue with one of my customer which i send email i get bounce message while i can receive their emails with no issue. i have exchange 2010 installed and im using Anti spam device too. my domain is ok.com
    i try to send from OWA as well but i get the same result.
    Delivery has failed to these recipients or groups:
    [email protected] A problem occurred during the delivery of this
    message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
    Diagnostic information for administrators:
    Generating server: antispamServer.ok.com
    [email protected] #< #5.0.0 X-Spam-&-Virus-Firewall; host mail.abc.com[22.22.22.12] said: 554
    5.7.1 <btv1==14869c83b8f==[email protected]: Sender address rejected: Access denied (in reply to RCPT TO command)> #SMTP#
    Original message headers:
    any idea?
    thanks

    hi
    when i disable the antispam device i get this error
    smtp5.relay.iad3a.emailsrvr.com rejected your message to the following e-mail addresses:
    [email protected]
    smtp5.relay.iad3a.emailsrvr.com gave this error: <[email protected]>: Sender address rejected: Access denied
    Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another
    restriction may be preventing delivery.

  • Just downloaded iOS 7.0 on iPhone and now cannot send email -sender address rejected by server???

    JusJust downloaded iOS 7.0 on iPhone and now cannot send email -sender address rejected by server???

    What happens when you go to the web based mail for your email account?
    Are you able to login and send / receive messages from the web?
    If so, you might need to check outgoing email settings on your iPhone
    Settings > Mail, Contacts Calendars
    Tap on the account you are having an issue with
    Tap on the email address beside the word Account
    Tap on info beside SMTP  (SMTP = outgoing mail server)
    Tap on the SMTP server name again. 
    Make sure server is turned on
    Check settings & port info, password, etc.
    Good luck!

  • E-recruiting: Change of the sender in reject  e-mail for candidate

    Hello!!
    In e-recruiting 6.0 we needed modify the direction of the sender in reject  e-mail for candidate (activity u201Cnotification rejectu201D).
    At the moment, when a notification reject is sent, it appears the personal electronic direction of the recruiter who executes the activity (notification reject). The personal electronic direction (of recruiter) is registered in infotipo 105 subtype 0010.
    It is required that the sender direction is a generic direction (for example: work_with_us@example).
    ¿How I can realise this change?
    Thanks,
    Alicia

    Hi,
    in addition to the two solutions already mentioned I'd like to throw in the following two options:
    Instead of linking a workflow to every activity creation you could build an easy background job which runs once in a while sending the planned simple correspondences and invitations. The result would be the same as the workflow solution the sender is the user under which the job s planned.
    More flexible as not hard build in and development free would be a solution using the open correspondences function. You create a dummy user with the work_with_us@example e-mail using report RCF_CREATE_USER. This user is used to send all open correspondences and invitations manually. Of course this is more processing steps for the recruiters but if you need flexibility this is the price to pay.
    Kind Regards
    Roman

  • Pre won't let me put in an ip address for a mail server name when adding a new account.

    I can type it in, but it won't let me that add the accunt (sign in button doesn't work).  If i put a name in there, it lets me click "sign in".
    is this a known issue?  any workaround for this?  we don't have a qualifed name so i need to use the ip address of our mail server.
    Post relates to: Pre p100eww (Sprint)

    prehelpme wrote:
    I can type it in, but it won't let me that add the accunt (sign in button doesn't work).  If i put a name in there, it lets me click "sign in".
    is this a known issue?  any workaround for this?
    It was a known issue at the time of launch. There was a recent over-the-air update that addressed at least one Exchange sync issue (now allows http:// in addition to https:// access), but I have not read about whether it resolves the IP Address issue.

  • My mail send defaults to wrong mail server. How do I change it?

    My mail send defaults to wrong mail server. How do I change it?

    That was a long time ago. I don't even remember asking the question. I don't have that trouble at the moment.

  • Do we need to enter full email address in Incoming mail server settings on POP Account

    Do we need to enter full email address in Incoming mail server settings on POP Account or just the username? For example does it have to be [email protected] or only jim.nicholas works? How does it affect the way the emails are delivered between laptop (primary device) and ipad ???
    Please need help asap!!
    Thanks.

    For my POP account I have my full email address in the Address field but just my name (and not the '@...') in the User Name under Incoming Mail Server

  • "E-mail sender address rejected message"

    Hello guys.
    I have a big issue with my mobile devices. My Apple ID is [email protected] When I started using iCloud I created a [email protected] email address.
    In Mail on my Mac all works perfectly, but on my iPhone 4 and iPad2 I cannot send mails, but I canjust receive them.
    If I go in settings->Mail or in iCloud settings I see my Apple ID ([email protected]) instead my [email protected] address in the "e-mail address" field.
    It looks like it sends mails from my Apple ID address instead my me.com address.
    I tried everything: I managed my Apple ID deleting my [email protected] address as email address, I deleted my iCloud account from my iPhone
    and then set it up again... but It didn't work.
    Does anyone have the same problem? How did you solve it?
    Thank you!

    i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
    just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

  • IPhone4 when replying or forwarding mail messages i get a message that says Cannot Send Mail address rejected by the server because it does not allow relaying

    When forwarding mail this is what i get
    Cannot Send Mail
    A copy has been placed in your Outbox. The recipent _________________(email address) was rejected by the server because it does not allow relaying.
    Never had this problem before so not sure whats going on. Appreciate any help out there.

    Sounds like there is something wrong with your SMTP server. Try going into Settings>Mail, Contacts, Calendars>select the email account in question, go to the Outgoing server (SMTP) and check the settings. It may be you do not have a username and password in one of the areas. The phone may say optional in a couple, but it is usually mandatory. You can also try a reset on the device, hold the sleep/wake and home buttons together until you see the Apple logo and then release. If neither of these work, then you will need to delete the account, then delete the SMTP server, then add the account back, ensuring you use your username and password everywhere, even when it says optional.

  • Cannot Send Mail  Sender Address Rejected by server (Mac Mail)

    I am getting this message whenever I try to send mail using MAC mail though my cable provider (COX). It has just started. I can send mail fine from a PC on my network and via at ATT wireless card. But not via cable. I have tried all the obvious things and many things discussed in the forum including:
    - Run disk warrior in case there was a file problem
    - Delete user info from cox account
    - Reset modem and router
    - Change outgoing port
    - switched from wifi to Ethernet connection
    In talking to COX, they say they seem to have some undocumented incompatibilities with Mac mail that appear to be intermittent. He said this is common problem.
    I have had this problem one other time and resetting the modem seemed to fix the problem.
    Anybody find a permanent solution to this problem.

    Well I think I solved it. It appears that the outgoing server information dissapeared. The outgoing mail menue is hard to find go to preferences/accounts.
    At the bottom of the page is a pull down menu of different outgoing servers. One of the options is edit. Select this. While my COx account was there the information was no longer there. Filled it in again and everything worked fine.
    I must say it took me a while to find where I could adjust the outgiong mail server. Very poor design on Apple's part!

  • Sender address rejected by service

    I have many times sent images I take on my iphone to myself at home to import into iphoto with no problem. Today I try to do this and I get a message "A copy has been placed in your outbox. The sender address (mine) was rejected by the server". I phoned my server shaw.ca and they say it is a problem with the phone. Why would this work a few days ago and not now. Any comments would be appreciated.
    PS new phone at Christmas
    Thanks.

    Couple things in addition to this guide by shaw..
    http://www.shaw.ca/uploadedFiles/Support/Internet/Email/Setup/Accessing_Shaw_ema il_from_your_iPhone_or_iPad.pdf
    You may have to go into preferences in your shaw email account and enable mobile deveices and also type in your password.  I had to change my password because it wasnt strong enough apparently.  Then changed the outgoing mail server and incoming passwords on my iPhone to the new one I made and it worked.

  • HT1277 Sender address rejected by server

    I keep getting an error message when trying to send mail.  It states: sender address was rejected by server.  I have called my email provider and everything is setup properly according to their requirements.  Why is this happening?  I also have a .me account setup in macmail and am able to send from there no problem. 

    Is it gMail perchance?
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch

  • Error message 'sender address rejected by server' w/MacMail

    I receive email ok but all of a sudden I cannot send email or reply to email using Mac Mail. The error message says:
    Message could not be delivered and will remain in outbox,
    The sender address xxx@xxx was rejected by the server.
    What's up Apple server?
    Thanks
    Chas
    G3 B+W 450 Rev.2-ram 448mb-OS X on Cheetah disk   Mac OS X (10.3.9)  

    The security update didn't break any of my email accounts and I access several with Mail that are not provided by my ISP.
    Is this email account you were having problems sending messages with provided by your ISP - AT&T or other?
    I have a .Mac account and I also access my employer provided POP account with Mail and although I have no problems sending messages with either account and associated SMTP server since both SMTP servers are authenticated and my ISP does not block the use of SMTP servers that are outside of their network or not provided by my ISP on Port 25 as long as the SMTP server is authenticated, I use my ISP's SMTP server to send messages with both accounts when connected to my ISP at home.

Maybe you are looking for