Why is my stage not refreshing when I draw something on it in Flash CS6?

I just did a fresh install of Flash CS6.  Now when I open my .fla to edit it, the stage will not update to reflect my changes unless I scroll the stage up or down.  For example, I draw an oval on the stage.  The oval won't actually render until I scroll the stage or try to move it using the move tool.
Has anyone else experienced this or have any ideas?
Thanks in advance for your help!

I haven't experienced this yet and I've used it on as low as a 4GB laptop with quite a few apps loaded.
If esdebon's issue is you'res as well then as soon as it happens again, close all other applications, wait a few seconds (commit purge of cached pages of memory) and see if it happens.
You might also want to reduce the number of history states in Edit->Preferences->Undo. It's set to 100 levels by default. Change that to 50 and see if it helps. Sometimes changes are extremely complex and can rack up memory quickly. You might even want to turn it down to 25.
Let us know if either of those help.

Similar Messages

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Why does i photo not launch when i click on icon in dock?

      Help why does i photo not launch when i click on icon in dock?

    The icons in the Dock are aliases. If iPhoto isn't launching from the dock the alias may be broken. What you can do is first test to if iPhoto is working by launching the app from the Applications folder. Once you have determined iPhoto is OK then remove the old Dock icon by holding it down and dragging it to the desktop, it will disappear in a puff of smoke. Then go to the Applications folder and drag the iPhoto icon to the Dock and test it.

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

  • Why does the alarm not work when the iphone 4 is turned off

    why does the alarm not work when the iphone 4 for is  turned  off works fine when on most other phones work when off

    The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

  • Why does the mail not work when i updated my 5s to iOs 8?

    why does the mail not work when i updated my 5s to iOs 8?

    Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

  • Image does not refresh when I undo

    This seems only to happen when using my Wacom. A lot of friends have the same problem.
    The viewport/canvas does not refresh when undoing a paint stroke done with my Wacom Intuos4 Wireless. But when I make a new paint stroke or zoom in or something else that requires the viewport to refresh it looks correct. I am using Photoshop CS5.1 (Production Premium CS5.5). I am running Mac OS X Lion on a MacBook Pro 13" 2011.
    Anyone else having this issue? It seems like a nasty bug to me.

    OK, I have done some testing and this happens on three friends computers. What we have in common is Wacom Tablets (different kinds, intous3, intuos4, bamboo and intuos4wl), Photoshop CS5.5, OS X Lion and Macbook 13" 2011.
    However, another friend just bought a new intuos4wl for his Macbook Pro 15" late 2008 (MacBook Pro5,1) thats running Snow Leopard. So far this seems to only happen with wacoms + cs5.5 + lion. And another friend is running CS5 on a MacBook Pro 13" 2011 without problems.
    I would say that the problem is PS CS5.1 in conjunction with Lion and Wacom tablets. Scratch what I said earlier about external monitors.

  • Why sender agreement is not necessary when IDOC is a sender?

    Why sender agreement is not necessary when IDOC is a sender?

    Hi Chiru,
    The IDOC Adapter is implemented in ABAP and reside directly on the Integration Server (ABAP Stack).
    You cannot define a sender IDOC channel in directory due to the fact that the IDOC adapter does not run in J2EE Adapter Framework but is an "built in" adapter.
    I hope this clarifies.
    Regards.
    Praveen

  • Exchange 2010 SP3 - RU3 RU4 Public Folders issues ( not refreshing ) when grouping by Categories for "(None)" Group

    After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
    Thx

    Hi,
    From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
    As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
    grouping by flag.
    Should you need more assistance, feel free to tell me.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • Why does photo information not available when you email a photo?

    Why does photo information not available when you email a photo?

    How are you mailing from iPhoto? If you have iPhoto set to mail using Mail.app, you can set what will be included, when you mail with Share > Mail:

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • Why does the stage layout change when native menu added

    I have a program that was fine till I added a native menu to it. After adding the menu I have a space on both the left and the right of the stage. If I draw a shape at x=0, y=0 it appears about 40 pixels to the right of the window border. If I remove the menu the space still occurs what is going on?

    Adding the menu shrinks the effective size of the stage. This happens because in the app descriptor, you set the outer size of the window, not the stage size. When you add a menu, the space for the menu is created by removing space from the stage, not by increasing the height of the window.
    You see the bars around the app because you have the stage scalemode set to something other than noScale.(noScale is NOT the default.) The other scale modes attempt to keep most or all of the app in view when the app is not the same size as the stage (which happens when you add a menu to a window). The space around the edge is the result of the runtime scaling your content into the available space When you remove the menu, this space should be returned to the stage -- and does in my tests, so I can't explain why you don't see the scaling go away. Perhaps you are drawing your content based on the reduced stage size so you still have extra space after the menu is removed.
    The stage align property determines how the content is positioned on the stage when it is scaled down. The default is center which distributes space to either side when the stage is scaled horizontally, which is why the origin effectively moves away from the left side of the window. If you used the an AlignMode of top left, the origin would stay in the top left corner.
    In general, I recommend setting the stage scaleMode to noScale in an application, unless you have a specific need for one of the other scale modes. Even then, you can still scale things programmtically using logic appropriate to the situation. The other modes were designed for use in a browser where the SWF author may not have control of the stage and so must choose the least-bad compromise. In an AIR app, you have control and so don't need to make that compromise.

  • Report does not refresh when link to page

    I have a report on page 1 with a column link to a report on page 2.
    The link sets items on page 2.
    If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
    If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
    I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
    The items on page 2 are select lists and text (always submit when enter pressed).
    How can I get the report on page 2 to auto refresh without the user having to click the Go button?
    Message was edited by: kgamble
    kgamble

    I can't post the pages (site reasons) but here's the debug.
    All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
    I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
    Any ideas?
    Thanks
    Kathryn
    0.00:
    0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
    0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
    0.02: alter session set nls_language="ENGLISH"
    0.02: alter session set nls_territory="UNITED KINGDOM"
    0.02: NLS: CSV charset=WE8MSWIN1252
    0.02: ...NLS: Set Decimal separator="."
    0.02: ...NLS: Set NLS Group separator=","
    0.02: ...NLS: Set date format="DD-MON-RR"
    0.02: ...Setting session time_zone to dbtimezone
    0.02: NLS: Language=en-gb
    0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
    0.03: ...Supplied session ID can be used
    0.03: ...Application session: 8392008407576157812, user=PENTESTER
    0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
    0.03: Session: Fetch session header information
    0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
    0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
    0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
    0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
    0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
    0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
    0.05: ...Metadata: Fetch page attributes for application 129, page 8
    0.05: Fetch session state from database
    0.05: Branch point: BEFORE_HEADER
    0.05: Fetch application meta data
    0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
    0.06: Clear cache: request=RP
    0.06: ...Resetting pagination for page
    0.06: Clear cache: request=8
    0.06: ...Clearing Cache for Page 8
    0.06: Nulling cache for application "129" page: 8
    0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
    0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
    0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
    0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
    0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
    0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
    0.08: Computation point: BEFORE_HEADER
    0.08: Processing point: BEFORE_HEADER
    0.09: Show page template header
    0.09: Computation point: AFTER_HEADER
    0.09: Processing point: AFTER_HEADER
    0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
    0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
    Home New Complaint
    Existing Data
    Logout |
    Complaints Complainants
    0.14: Region: Complainant Search
    Complainant Search
    0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
    SD Number
    0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
    0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
    NI Number
    0.16: Region: criteria_go
    0.16: Item: P8_GO BUTTON
    0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
    0.17: Region: Complaint Search
    Complaint Search
    The list of complaints must match ALL of these specified search criteria:
    0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
    Start
    0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
    End
    0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
    0.20: Item: P8_TARGET COMBOBOX
    Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
    0.22: Item: P8_RECUR COMBOBOX
    Recurrent? -- All -- YES NO
    0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
    Payments -- Select -- YES NO
    0.23: Item: P8_IDR COMBOBOX
    Type of Complaint -- All -- IDR Other Complaint
    0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
    0.23: Computation point: BEFORE_BOX_BODY
    0.23: Processing point: BEFORE_BOX_BODY
    0.25: Region: Complaints List
    Complaints List
    0.25: show report
    0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
    0.28: determine column headings
    0.28: activate sort
    0.38: parse query as: GENERAL1
    0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
    0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
    0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
    0.39: binding: ":P8_START"="P8_START" value=""
    0.39: binding: ":P8_END"="P8_END" value=""
    0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
    0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
    0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
    0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
    0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
    0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
    0.41: print column headings
    0.41: rows loop: 15 row(s)
    There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
    0.42: Computation point: AFTER_BOX_BODY
    0.42: Processing point: AFTER_BOX_BODY

  • Why is my password not working when i want to update apps?

    Please tell me why my Apple ID is not working when i want to update apps?(just the purchased apps are not working).I now have an acount that dosen't have a card entered.

    For examle i have iGO primo and my password is not working (i already reset it).

Maybe you are looking for