Why is my time capsule LED blinking  yellow?

My Time capsule blinks yellow and has not been backing up for 3 weeks.
Any ideas on how to fix it?

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/TS1589

Similar Messages

  • Why does my Time Capsule constantly blink yellow?

    I've reset it dozens of times, green light comes on, and after a few days it starts blinking yellow again.  We use it as our wireless modem.   I'm running OS 10.6.8.

    terrihubble wrote:
    Did the update looks good, I appreciate the help...
    If you start getting server disconnected messages tomorrow.. every few minutes.. go back to 7.5.2 firmware and change the "check for updates" to never.

  • The light on my time capsule keeps blinking yellow. ! mark in toolbar time capsule and it says it was unable to finish backup because back up disk couldn't be found but it also says last back up was successful.

    The light on my time capsule keeps blinking yellow. ! mark in toolbar time capsule and it says it was unable to finish backup because back up disk couldn't be found but it also says last back up was successful.

    Hi jon88906,
    If you are seeing a flashing amber light on your Time Capsule, you may find the following articles helpful:
    AirPort base stations: About AirPort base station status lights (LED)
    http://support.apple.com/kb/ht4600
    Wi-Fi base station: Understanding and resolving a blinking amber status light
    http://support.apple.com/kb/ts1589
    If you are still seeing an alert message about Time Machine being unable to find your backup disk, then this article may be useful as well:
    OS X Mavericks: If Time Machine can’t find your backup disk
    http://support.apple.com/kb/PH14170
    Regards,
    - Brenden

  • Time Capsule light blinking yellow

    I know what this means if it were a street light. What does it mean on the TC? It seems to be working properly otherwise; at least the airport is. I don't have a clue how to check if it is backing up or not??

    WendellJ, welcome to the discussions!
    If everything appears to be normal and you have a blinking yellow light, it is probably an alert for a firmware update your Time Capsule.
    To verify, Open Hard Drive > Applications > Utilities > AirPort Utility
    Click on Manual Setup at the lower left of the pane when AirPort Utility opens.
    The next page is a Summary of your settings. Click on "Status" and another window will open with a message explaining the reason for the blinking yellow light.

  • Why is my time capsule blinking yellow?

    why is my time capsule blinking yellow?

    The Time Capsule is complaining about something.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the amber dot and another window will open to explain what the Time Capsule is whining about....along with suggested actions to remedy the situation.

  • Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber.

    Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.

    Hey jamesarm97 & diegofoto,
    On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
    Apple - Support - System Status
    http://www.apple.com/support/systemstatus/
    If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
    iCloud: Troubleshooting web browser issues with iCloud.com
    http://support.apple.com/kb/TS4050
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    Thanks,
    Matt M.

  • My time capsule is flashing yellow. what does that mean

    my time capsule is flashing yellow. what does that mean?

    It needs attention. Determine the reason by using AirPort Utility. It's in your Mac's Utilities folder.

  • Why did my time capsule stopped backing up?

    Why would my time capsule stop backing up, it is set to delet when the drive is full?

    LaPastenague wrote:
    Many people report that TM no longer deletes old backups as it should.
    That does happen sometimes, but for many different reasons.
    TM should never run out of space
    Yes, it can.  First, remember that it deletes entire backups, not the backups of individual files.  Second, it won't ever delete the last remaining backup.  
    So if it needs to do a very large backup, there needs to be room for the last remaining backup, plus the new one, plus some workspace.  That's why we recommend that the TM drive be 3-4 times the size of the data it's backing-up.  If it's much less than that, and there's a need for a large or full backup, there may not be enough room.
    as i understand how it works, it should simply give a warning that the old backups need to be deleted.
    That's how it worked on Leopard, if you had the "Warn when old backups are deleted" option checked -- the backup would fail if there wasn't room.  All you had to do then was remove the check, but many folks didn't understand that. 
    So, effective with Snow Leopard, the option is now "Notify after old backups are deleted," and that's what happens -- old backups are deleted automatically when necessary, and a notice is sent only after the new backup completes.
    It seems that after an upgrade install of the OS.. TM ceases to have the ability to delete old backups.. it simply runs out of space and refuses to backup.
    Normally not.  Some have turned out to be users who actually did a "clean install," erasing their internal HD.  If you do that, and don't use either Setup Assistant or Migration Assistant to put your data back (and transfer Computer Settings), the erased drive is treated as a different one.  In that case, TM will do a full backup, so requires a lot space.
    However, effective with Mountain Lion, TM does add more space for "padding" than before, sometimes quite a bit more, so a drive that was barely large enough on Lion or earlier may be too small now.
    EDIT:  A good way to figure out what's going on is to look at the log messages, either by using Console and filtering for backupd, or via the widget in #A1 of Time Machine - Troubleshooting
    Message was edited by: Pondini

  • HT2341 When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?

    When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?
    Also, I apparently have to replace my battery. Could the problem have any relevance to a dead battery?

    Have you held the power button down for 10+ seconds?  That should turn it off.
    Ciao.

  • My time capsule is blinking amber

    It just started doing it, and I can't seem to get anything to connect to the internet. It shows in the airport utility, but its blinking in there as well, and the internet light is yellow.

    Go ahead and hook up the Time Capsule again as it is normally configured.
    Click the Apple icon in the upper left corner of the screen and then click Software Update to see if there are any updates for AirPort Utility.
    You want to be using AirPort Utility 6.3.1, which is supposed to fix some bugs, like the disappearing Time Capsule.
    If you have a Mac laptop, try temporarily connecting an Ethernet cable from the Mac to one of the LAN <-> ports on the Time Capsule to check if AirPort Utility can "see" the Time Capsule that way.
    If yes, click directly on the amber dot and a message will appear with more info about the issue.

  • My time capsule is blinking orange and I can not get it to stop.  I have done a hard reset and unplugged it but it continues to blink orange.  This all started because the time capsule stated it was delayed in backing up so I thought I would try to reset.

    My time capsule stated that it was delayed in backing up so I decided to do a hard reset on the time capsule.  Now I am getting a blinking orange light and I can not get it to go back to green.  I have had to hard wire the modem into my computer for connection.  I need some help please.  Thank you.

    Assuming it is not simply broken, a slowly flashing LED probably means the TC is not receiving an IP address from the modem. Make sure you power down your modem whenever you change what is connected to it.
    Having to unplug the Ethernet cable from the TC and plugging it in to your Mac repeatedly so that you can communicate is tedious enough, but endeavor to add the power cycle exercise to that action.

  • After upgrading to lion Time Capsule is solid yellow

    Hi
    After upgrading to lion I am experiencing a lot of problems with time caspule
    1. backup fail: it starts and than fails (error message and yellow warning triangle)
    2. unable to connect to TC disk, neither from airport utility, nor from Finder
    3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
    After a lot of reboot,  reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
    now backup seems to work and I can browse files in Time Machine
    BUT
    Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
    Can somebody help me.
    This all happened after Lion installation. Not a problem before
    Franco

    Hi William
    The disk is the internal Time Capsule Disk. It's a 1Tb model.
    My iMac is localized in Italian
    So I write here the Italian message and a possible translation
    The first error message I get opening Airport Utility is:
    Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
    (AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
    If I press on "Continue" I enter a page that says
    "Problema 1 di 1: Il disco Time Capsule non funziona"
    (Problem 1 of 1: The Time Capsule Disk doesn't work)
    "Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
    (There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
    While if I go to the manual settings and I select the disk,
    on the disk data info I have
    Stato S.M.A.R.T.: Non funziona
    (S.M.A.R.T status: Not working)
    As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
    I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
    I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
    I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?)  and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
    (I can agree on that now, but I was surprised to hear that from them )
    Thank you very much for any help.
    I hope this info helps
    Franco Andrea

  • Why does my Time Capsule want to do COMPLETE backups every time?

    I'm still new to this Time Capsule, only had it about a week, and i'm still trying to figure it out. I have an old LaCie Hd that i was using for my Time Machine backups before, with 2 partitions, for 2 different computers both running different OS's....1 Snow Leopard, and 1 Lion.
    Now i just got this Time Capsule, and i am under the impression that i don't need to partition anything? I can't anyway, as it is a .sparseimage file. But i should be able to back up all my macs to the same Time Capsule HD. But why is it when i want to back up my Snow Leopard OS and/or Lion OS - that it wants to do a complete backup of all 400+ GB of stuff? I don't change any settings, i just let it do its thing, but when i look at it in the Time Machine/System Preferences it is gathering everything up and taking forever.
    Why does it want to keep backing up my entie computer and not just what's new after the first initial backup? Thanks

    tool wrote:
    Now i just got this Time Capsule, and i am under the impression that i don't need to partition anything? I can't anyway, as it is a .sparseimage file. But i should be able to back up all my macs to the same Time Capsule HD.
    Correct.  Time Machine will make a separate sparse bundle for each Mac.
    Why does it want to keep backing up my entie computer and not just what's new after the first initial backup? 
    The first backup of each Mac to the Time Capsule will be a full one (not just the changes since the last backup to the LaCie).  And that's pretty slow over WIFI, so it's a good idea to do the first one via Ethernet.
    Are you saying that both Macs' initial, full backups to the Time Capsule were completed, but subsequent ones are full backups again?  If so, see #D7 in Time Machine - Troubleshooting.

  • Why does the Time Capsule of my neighbour appears and not mine?

    Why does the The Time Capsule of my neighbour appears and not mine?  I tried everything.
    Can I use the Capsule as merely a back up without making use of Wifi?  By connecting by cable to the computer?

    Why does the The Time Capsule of my neighbour appears and not mine?  I tried everything.
    What generation is your neighbour's and what generation is yours??
    Sometimes the changes in the TC and firmware can make wireless fail.. also location is important.. the location of your neighbours might be better than yours.. his also might interfere with yours.. set a fixed channel and try the various channels.
    Can I use the Capsule as merely a back up without making use of Wifi?  By connecting by cable to the computer?
    Sure, but you need to work out how the network is going to work.. if you are still picking up network from wireless.. then set static ip for the TC in a different IP range.. set no gateway (router ip) or dns and it will work just fine.

  • Why doesn't Time Capsule appear in Disk Utility anymore?

    Time Machine gave me a msg that it was unable to back up yesterday due to a problem with an image on my iMac (21.5") drive. It said to repair the external drive I'm using with Disk Utility. I tried the Time Capsule I'm using and which is hooked up and has worked fine for months does not appear.  Why?
    Also got a msg today saying: "backup cannot be complete due to unexpected error. Code -6584"  Never had such a problem before Mt. Lion.
    I see no forum category for Time Machine or Time Capsule.

    You need to verify the backup.
    Hold the option key while clicking the Time Machine icon on the top right menu area.
    But reboot the TC beforehand.. maybe the whole network.
    The error is well known.. see
    https://discussions.apple.com/thread/3123920?tstart=0

Maybe you are looking for

  • My old computer died, how do I transfer stuff from my iTouch to computer?

    My computer died, so I got a new one. I have a whole bunch of apps that weren't free and I can't afford to repay for all of them. It really annoys me how iTunes didn't give an option to sync the ipod to the computer, especially for situations like th

  • Parameters has to act as select-options in module pool.

    Hi Folks, I have to make material number parameters as select-options in Tcode = CS15. & I have to add one more fileld as select-options in the same screen. It's in modulpool. Shall i use SCREEN-EXITS for this? what will be the preferable solutions?

  • Uploading selection data to an ABAP selection screen

    Not sure this is the best place for this question but here goes. When a user is presented with a selection screen from an ABAP they have the option to upload data from a text file.  This works fine for single value lists but I cannot get this to work

  • File System or Database

    Hi, I'm new to KM and was posed a question about a situtation I'm not familiar with.  We are going live in BI and all of our users will be saving BI Links (also known as KM Bookmarks) to our Portal Favorites which are store in KM.  With so many peopl

  • Best Practices in Building/Stage-In

    What are the best practices in building/stage-in process? I tried to use a CVS repository to have employees stage in their projects then a pair of actual builders will check them out and compile, completing the elevation to production. I'm experienci