Why is my tv show displaying incorrect summary artwork for the season when each episode as correct artwork?

In iTunes 11, I have a TV Show with correct artwork for every episode. However, iTunes displays a completely different image for the "summary" image displayed on the main TV Shows page. Why is that?

Similar Messages

Why PDF's with transparency display incorrectly?

Hi everybody
I used this script ( http://www.adobe.com/devnet/digitalpublishingsuite/articles/dps-pdf-to-indesign.html ) to create a magazine based on pdfs but I have a big problem.
The imported pdfs with trasparent elements display incorrectly but only in the vertical position as you can see in the images, in the horizontal and menu, display correctly.
I don't have control of the pdfs because the publisher send it already ready.
I used the v.22 for this pubblication because I can't update the app now but I installed the latest DPS tools.
Thanks in advance for help.

I know this is an old thread but i'd like to answer because it'll be helpful for someone looking for answers like I was today ;-)
This is an expected behavior for a PDF article. PDF Articles only supports transparency effects such as opacity and multiply, blending modes are not supported. However the same content if uploaded as a PNG/JPEG article should work fine.
It's also documented in this best practices document here Digital Publishing Suite Help | Best practices for creating overlays

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

I have recently started downloading video files. I have downloaded a season of a tv show. The season had 9 episodes. Three downloaded fine and the other 6 will not. When i try to download them i get a message saying error -34 The disk you are attempting t

I have recently started downloading video files. I
have downloaded a season of a tv show. The season had
9 episodes. Three downloaded fine and the other 6
will not. When i try to download them i get a message
saying error
-34 The disk you are attempting to use is full.
Remove files and empty recycle bin to create space. I
dont understand why it keeps doing this. I have lots
of space on itunes and my computer is not full
either.What can i do? How can i prevent this? Is
there a problem with my computer? Thank you!

have a look at this support article.

How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

Hi TheGuru146,
It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
iPod nano (7th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
-Jason

E Recruiting-Display current holding position for the Internal Candidates

Hi
Is it possible to display current holding position for the Internal Candidates?
Thanks inadvance.

Hello,
Yes it is possible to display the employees current position. You did not however specify 2 things - where do you want to display the position and what version of E-Recruiting are you using.
From EhP4 there is a BAdi ERC_TRXLIST_CDCYL which you can use to enhance the lists of assignments to requisitions to also show the position for Recruiters. You will then configure the additional column in SPRO under nodes "Define Column Pool for Candidate Selection" and "Assign Columns for Candidate Shortlists". You can also copy and modify the smartforms for example HRRCF_CANDIDATE_PREVIEW for recruiters and modify to include the position and then configure the developed smartform. Position will be available in HRP1001 with a 008 relationship to CP object.
Regards

15" Retina Display MBP or wait for the 13"?

I'm upgrading from my current HP laptop which is about 4 years old now and is as slow as a laptop gets. I don't know whether to get the current 15" retina display MPB or wait for the 13" to be released and get that since i'm only a 10th grade student and the portability and size may be more convenient but i'm not sure if the 13" would be too small or the 15" would be too big. A teacher at my school has a 13" and from what i've seen, it doesn't look as big as i'd want my personal laptop to be but at the same time, the 15" looks too big in the videos i've watched. Please help!

If you really want to hear some screams and howls about how unusable Photoshop is with the rMBP, visit the Photoshop users forum... you'll get an earful!
Although Adobe showed a Retina version of PS in June at the WWDC where the rMBP was announced, they've issued no statements as to whether - or when - it's going to go 'live'. Most heavy-duty PS user are using eternal monitors anyway so it doesn't affect them too much - just that they don't have a portable machine to edit photos.
But, as I said, Apple apps look great - if you can get by using only Apple apps, then the rMBP is a winner. If you're going to use third-party apps, however, it's just not ready for prime time.
Clinton

My laptop is stolen and hasn't showed up in my cloud for the past week but the name of it is changed. How do I get it's last known location?

My laptop is stolen and hasn't showed up in my cloud for the past week but the name of it is changed. How do I get it's last known location?

That"s part of my problem, I dont get that option.
I get iTunes store and that's about it.
I've thought about "erasing/resetting" all settings but I'm afraid to do it. Or am I
missing something in iTunes?
Help please!
Joanne

Why can´t I find my 5d Mark ii in the finder when I connect it with my mac?

Why can´t I find my 5d Mark ii in the finder when I connect it with my mac?

Because it is not a mass storage device that would appear in the Finder. It uses the Picture Transfer Protocol (PTP) to interface with a computer. It can be accessed using an application that uses PTP, such as Image Capture, iPhoto, Aperture, or Canon's software. These applications also support more camera-specific features than the Finder would, such as tethered shooting and possibly camera clock synchronization.

My phone is on recovery mode and when i try to restore it then it shows device is not eligible for the request

my phone is on recovery mode and when i try to restore it then it shows device is not eligible for the request

Hi, are you doing it through Settings or via iTunes? If doing it through Settings, try plugging it in via USB and updating with iTunes. Hope this helps.

Why do I keep getting an error "insufficient data for an image" when opening a document

why do I keep getting an error "insufficient data for an image" when opening a document in Adobe Reader XI 11.0.06

I am also having this problem, especially with scanned documents. Since I need to download scanned documents in my work this is a big problem!Sometimes I can read but not save the document, sometimes one or two of the pages will be blank from the start. I have the latest version of Adobe Reader XI (11.0.10). I tried reducing the page zoom, a suggested workaround on this page: Acrobat: “Insufficient data for an image” error after updating to 10.1.4 or 9.5.2, but that did not help at all. FWIW I use a Windows 8.1 PC with 4 GB RAM. I usually download PDFs from the internet using Firefox.

When I updated by iphone with IOS7, my calendar entries did not follow the icloud. I am only showing pre set calendar entries for the year?

When I updated by iphone with IOS7, my calendar entries did not follow the icloud. I am only showing pre set calendar entries for the year and lost all other calendar entrie and it will not take any new entries. They show up in my outlook, but not on my iphone, which they did before I updated my software to the new i0s7

Before syncing, select each calendar on your Mac and back it up by going to File>Export>Export. If anything goes missing, you can use these to restore your calendars.
Have you tried simply force closing the calendar app on your iPhone? To do this, double-tap the home button, locate the calendar app, then swipe up on the image above the app icloud to close it and tap the home bottom. Then test your calendar again.

I am trying to Download the free Maverick 10.9.1 and it's sitting there showing "downloading" but nothing indicates for the last 15 minutes that it is really doing it? Anyone out there has ideas to hare?

I am trying to Download the free Maverick 10.9.1 and it's sitting there showing "downloading" but nothing indicates for the last 15 minutes that it is really doing it? Anyone out there has ideas to share?

When I downloaded it, it appeared as if nothing was happening but it actually was being downloaded! It took quite some time to download. I suspect the internet speed affects how quickly it moves.

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Display discounts and surcharges for the same vbeln in the same row

hi experts
i have to display one discount and surcharges for one vbeln, posnr and one material,
i have used konv-kschl for condition type and konv-kwert for condition value.
in my output the conditions what i have given for discounts and surcharges its matching and displaying in different lines for the same vbeln and posnr. usually i should get one line of outputfor one vbeln, but iam getting 3 times repeated
(one without discounts, surcharges,
second : same vblen, posnr with discounts,
third : same vblen, posnr for surcharges )
please modify the internal table and conditions below what i have given in my object.
DATA : BEGIN OF it_konv OCCURS 0,
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kwert LIKE konv-kwert, "Condition value
kbetr LIKE konv-kbetr,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF it_konv.
LOOP AT it_konv INTO wa_konv.
CASE wa_konv-kschl.
WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
wa_konv-discounts = wa_konv-kwert.
WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
OR 'ZS01' OR 'ZS02' OR 'ZS03'.
wa_konv-surcharges = wa_konv-kwert.
WHEN OTHERS.
DELETE it_konv WHERE kschl = wa_konv-kschl.
ENDCASE.
MODIFY it_konv FROM wa_konv TRANSPORTING discounts surcharges.
CLEAR wa_konv.
REFRESH wa_konv.
ENDLOOP.
As per one of the abap expert who responded to my query is the following.
DATA : BEGIN OF it_konv OCCURS 0,
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kwert LIKE konv-kwert, "Condition value
kbetr LIKE konv-kbetr,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF it_konv.
DATA : BEGIN OF wa_konv OCCURS 0,
kposn LIKE konv-kposn,
discounts LIKE konv-kwert,
surcharges LIKE konv-kwert,
hkunnr LIKE knvh-hkunnr,
kunnr LIKE knvh-kunnr,
END OF wa_konv.
move '1' to it_konv-knumv.
move 'ZD01' to it_konv-kschl.
move '1200' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
move '2' to it_konv-knumv.
move 'ZEXP' to it_konv-kschl.
move '1300' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
move '3' to it_konv-knumv.
move 'ZEXP' to it_konv-kschl.
move '1400' to it_konv-kwert.
move '0010' to it_konv-kposn.
append it_konv.
LOOP AT it_konv.
MOVE-CORRESPONDING it_konv to wa_konv.
CASE IT_konv-kschl.
WHEN 'ZD01' OR 'ZD02' OR 'ZD03'.
wa_konv-discounts = IT_konv-kwert.
WHEN 'ZEXP' OR 'ZEXW' OR 'ZCAF' OR 'ZCAP' OR 'ZCAQ'
OR 'ZS01' OR 'ZS02' OR 'ZS03'.
wa_konv-surcharges = IT_konv-kwert.
ENDCASE.
COLLECT WA_KONV.
CLEAR wa_konv.
ENDLOOP.
But to try according to the above, i dont have the values for kwert, i know only the condition type (KSCHL). based on this how can i solve my problem
please clarify
thanks in advance

Refer to the suggestion given by Naimesh here Can we modify a sub-total in ALV making use of function GET_GLOBALS_FROM_SLVC_FULLSCR and the method GET_SUBTOTALS. You can see the parameter ep_collect01 refered in case of subtotals. Can you please check ep_collect00 for grand total in your case.
As said about EP_COLLECT00,here goes a classic example Modify grand total in ALV GRID
BR
Keshav
Edited by: Keshav.T on Sep 21, 2011 9:39 AM

Why is my tv show displaying incorrect summary artwork for the season when each episode as correct artwork?

Similar Messages

Maybe you are looking for