Why is my video jumping?

my problem is this.
i am recording gameplay from my xbox using a hauppauge hd pvr and eyetv.
it all is working fine, however, the footage i record playes perfectly well in imovie 11.
but when i export it into final cut X,  to jazz it up a bit, the video still plays but is a little jumpy. its as if your watching a tv and the signal starts to break up.
why is this happening?
i am importing the game footage at 1080i if that helps.

Hey Adam,
I found the Fixed Resolution button - I couldn't see it because I'm actually in 3D mode because I've got a lighting effect on the scene, and the Fixed Resolution setting only seems to be an option in 2D mode.
I switched to 2D and now it's all clean - so thanks a lot!
I've marked this question as answered.
Tx,
Wayne

Similar Messages

  • Connecting iPad to Projector - Panasonic PT-D5700 - Video "Jumps"

    When connecting the iPad and iPad 2 via VGA connector to a Panasonic PT-D5700 projector, the video "jumps" at a regular interval of about 1.5 seconds in between each jump.
    Has anyone else had issues connecting to projectors?
    I was able to find a work around - I took the VGA connection from the iPad into an aux input on a document camera, then used the output from the doc cam and that seemed to clean up the signal and did elimate the jumping.  I have made this work with one brand of document camera, but not on another.
    The VGA out of the iPad to a Plasma or LCD has worked with no issue, so I can only assume it is some sort of refresh or signal mismatch between the iPad and the projector.
    If anyone has any info to share it is appreciated.
    Thanks

    That's no guarantee. Check this list and make sure your mini is supported.
    http://support.apple.com/kb/HT3235
    If your Bose can switch HDMI, why not get a DVI to HDMI cable and use that between the mini and the Bose? The picture quality will be lightyears better.

  • HT202020 Why are certain videos that I have taken with my iPhone 4 not supported by Aperture.

    Why are certain videos that I have taken with my iPhone not supported by Aperture?  That's weird.  I expect that since both iPhone and Aperture are Apple products, file support should be seamless between the two. 
    Also, iPhone 4 does not appear as Camera Model in the metadata of the unsupported video file in Aperture .  But other videos I have taken with the same iPhone 4 appear in Aperture and the Camera Model appears correctly.  Why is that?

    Have you done some cleaning and cleared caches on your Mac? Maybe the  com.apple.xpchelper.cache file is missing. Check the folder /System/Library/Caches/
    Re: Import video to Aperture library on Mountain Lion https://discussions.apple.com/message/19304702#19304702
    If this file should be missing, you need to restore it from a backup or reinstall it by reinstalling your system.
    Regards
    Léonie

  • Why would my video clips be running too fast when played on the monitor panel?

    I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
    My main question is: "why would my video clips be running too fast when played on the monitor panel ?".  This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline.  I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline.  They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes.  I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
    The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ?  Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
    After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips.  They are in their original state.
    Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
    Help would be greatly appreciated.

    Yes, that is what the problem was.
    Although the video camera on my Nokia N8, mobile was capturing at 25fps,
    for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps.  Once in Interpret Footage I was able to change the fps to 25.
    Thanks for the help.

  • Why are my video edits not being saved on Photoshop CS6?

    Why are my video edits not being saved on Photoshop CS6?
    I made a TON of edits in a video group, then duplicated that group into another file... and all my edits are gone.
    I spent hours working on this, so please let me know what the hell happened and how I can make sure it never happens again...
    also--why would CS6 come with such a devastating feature?!?! Who came up with this???

    Welcome to the forum.
    I did not see any reference to Save, Save_As, or Save_As_a_Copy. Did you use one of those?
    Good luck,
    Hunt

  • HT3775 why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

    why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

    why some times video and audeo files are not opening in my Mac? sir plz advise me the application i need to download.thanks.

  • Why are my videos not playing the right way up

    Why are my videos not playing the right way up

    I took four video clips while on a trip this week.  Two are oriented the right way (playing wide on the device and imported correctly).  The other two are Tall and not oriented right.  Orientation is 90 degrees to the right.  I don't know why this is happening on occasions.  Even some pictures I took did the same **** thing.  It's weird.  And I can't figure it out.  The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

  • Why is the Video clip jumpy?

    Why is the Video clip jumpy? I have just installed Premiere Elements 12 in a brand new computer:
    Acer Aspire V5
    CPU AMD Dual Core Processor a-4 APU with Radeon (TM HD Graphics 1.0 GHz)
    4GB DDR3 memory
    500 GB HDD
    Windows 8.1
    The file types are AVI, AVCHD, and MOV files

    northgal
    Lots of ways to go on this. But, I think starting with a definition of the source media and how you are setting up the project is going to be the path to success. So, we need to zero in on questions/answers related to what I wrote earlier
    The properties of the source media need expanding up beyond "file types are AVI, AVCHD, and MOV.
    a. What are the video and audio compression of the files with the .avi file extension and what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    b. What is the file extension for the file with the AVCHD video compression. Again, what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    c. What are the video and audio compression of the files with the .mov file extension and what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    You asked how to go about that. The best way is to run each of the file types through a video properties read out program such as MediaInfo
    http://mediaarea.net/en/MediaInfo
    Latest versions of that MediaInfo have been problematic in that you need to be on guard for any unwanted toolbars and installed "extra" programs (bloatware).
    OR
    We would not necessarily get more information, but we would get enough to put us in a good position, if we run the types through gspot utility (good for codec and basic information)...less bloatware concerns
    http://www.headbands.com/gspot/
    The dialog that you would get from gspot would look like
    Once we know the video and audio codecs, frame size, frames rates, interlaced or progressive frame rates, etc. that we are dealing with, we on a good course to set up the project settings to match those properties, independant of whatever export choices we have in mind. That we will address later after a successful import and edit.
    OR
    A third choice for getting at this information is less productive but can be a good last resort...knowing the brand/model/recording settings of the camera from which these files came.
    Please review and then let us know if you can gather the file properties information details requested.
    We will be watching for your results.
    Thank you.
    ATR

  • Why is the video inside FCP 6 slightly darker than the OS

    Why is the video playback inside FCP 6.0.5 slightly darker than wehn I play the same Quick Time file just inside the normal OSX10.5?
    I'm using a Cinema HD 23" monitor running at 1920x1200 and display profile is Cinema HD Calibrated
    Thx
    Kevin

    It is darker because that is a more closely representational GAMMA as to what you will see on your external broadcast monitor. QT lightens the gamma to ensure that most computer monitors can see the footage. As stated, if you want the gamma to appear darker, enable FCP COLOR COMPATIBILITY in the QT preferences.
    WHY does it look more like what you see in FCP when you view this on a PC? Well, that is the monitor that PC is using. Take this file, put it on 10 PC all with different monitors and you will see 10 different gammas. The monitors themselves can be set to certain DISPLAY PROFILES (look in your DISPLAYS section under COLOR)...so you can have a HUGE variety of looks.
    The reason is because of the monitors and the computers driving them.
    Shane

  • Why is the video buffering when downloading

    why is the video that I am downloading buffering on my imac.

    Probably because your Internet connection is too slow. What speed is your connection? Your computer is running much faster than your connection can provide the movie data.

  • Why is the video I took with my iphone5c clear but when I email it it is blurry

    Why is the video I take on my IPhone5c clear but when I email or post to Youtube it is blurry?

    DId the Sprint people possibly set this code?

  • Why does the videos looks so slow

    why does the videos looks so slow only in the internet

    Many reasons, like what format they are, for instance Flash Videos will be slower.
    Any links to the slow ones?
    Which exact Mac do you have?

  • Video jumps into corner when full screen enabled

    When I try to switch a video (it doesn't matter what format) into full screen mode, the video jumps into the upper left corner of the screen so that only a corner of the video can be seen. I have tried reinstalling Media Player, and my graphics drivers are up to date. Any ideas on how to fix this?

    what features make adope playe better then media player? and which formats dose it supports?
    Download Islamic Books

  • Why does my video keep stopping at all stages as i'm watching a video

    why does my video keeping stopping at all times

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Why does my video suddenly freeze when playing ?

    why does my video suddenly freeze when playing ?

    Which app are you using to play the videos?  Which version? 
    Are these offline or browser videos?  Both? 
    Videos flash based? 

Maybe you are looking for

  • Video and audio files from dvd using FCP

    Hi Trying to get footage from a dvd using fcp. I can import the clips ok using file >import but they have no audio with them and the audio folder on the dvd is blank...any ideas???????? cheers

  • Cannot print a documet using Adobe Printer

    It tries and then I get the message: "Acrobat Distiller has encountered a problem and needs to close." I can print most other stuff, but certain forms will not print and I get this error every time. These forms are produced in another software progra

  • BB phone giving a lot of problem

    The blackberry phone which I purchased in month of February is giving me a lot of problems. The entire scenario is that on I purchased the Cell phone on 16th February 2012 and the very next day my phone was dead and when I went to the service center

  • Cannot redownload trial after system restore

    I had downloaded CC along with Photoshop, Illustrator, and After Effects as trial versions, and they launched fine with no problems. However, my computer went through a system restore (to an earlier date) and now those programs are no longer on my co

  • Is "impdp" hung?

    Hi Env: Oracle 10gR2 (10.2.0.5) OS: RHEL 5.8 64-bit I started the "impdp" job around 5:40pm yesterday as follows: nohup impdp ID/'PWD'@DIS DIRECTORY=dp_dump_dir parallel=6 DUMPFILE=EXPORT_%U.DMP NOLOGFILE=Y schemas=[schema-list] > /dbexports/exports/