Why is my viewer black?
Why is my viewer black? I cannot get any motion operations or effects to work when double-clicking on a photo or video clip. Can see it in the canvas, but the viewer remains black. FCP 5.1.4 Preferences deleted. PLENTY of room on the hard drive This is a Power Mac-just before intell processor.
>Do you think I need to uninstall?
What, because you pressed the W key by mistake? That's a bit drastic.
Load something into the Viewer and press W again.
Similar Messages
-
Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Why Table or View does not exist???
Hi to all. I have an issue with my Business Objects. I have a relationship between two entities with the following cardinality:
EntityA 1......* Entity B, the relation is a composition and the IDs for them are DB Sequence.
I have created the corresponding views and the view link and they all work fine in the Application Module. Also, in the View Object for the EntityA ( ViewObjectA ), I have created a View Criteria, a nested one, with two attributes: the first one is an att from the*ViewObjectA* and use a value from a bind variable (Integer), and the second one is an attribute from the Entity B son and it's value is static (1). I tested with the query button and says OK. When I run the AppModule for test the ViewCriteria, I got this error: ORA-00942: table or view does not exist . And for my sorprise, I checked the query resultant and it's wrong!! Please see an example below:
SELECT Att1,Att2 FROM EntityA WHERE ( ( ( (EntityA.att1 = :id ) AND (EXISTS(SELECT 1 FROM EntityBNQ1 EntityBNQ1 WHERE ( (*EntityBDNQ1.att1 = :id*) ) AND ( EntityA.att1 = EntityBDNQ1.att1 ))) ) ) ) AND (EntityA.att1 = EntityBDNQ1.Att1))) ) ) )
As can be seen, the name of the tabla for the EntityB has NQ1 attached, and I don't know why. The view link works perfectly, as also the create operation for both ViewsObjects.
Please can anyone tell me what I'm doing wrong, if I have a mistake? What should I do??
Thanks in advance.
PS: In a new application, I created a Business Components from DataBase, and it works my WiewCriteria. I just can't believe that I should start all over again.
Thanks in advance again.Hi and thanks for the answers. Apologize for my forgetfulness of the version. It's 11.1.1.5.0 and ADF Business Components 11.1.1.60.13
I created a new Application and I made a Business Components From Table with only the two Entities mentioned before. Once configured (Put the ID as a DBSequence), created the views an the View Criteria and it's just all fine.
Hear is fragment of the XML from my EntityA (the god one). The first part it's the key attribute, the second one its the key.
This is the god working version
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="Person"
Version="11.1.1.61.92"
DBObjectType="table"
DBObjectName="EntityA"
AliasName="Person"
BindingStyle="OracleName"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access"/>
<AttrArray Name="_publishEvents"/>
</DesignTime>
<Attribute
Name="EntityId"
ColumnName="EntityA_ID"
SQLType="NUMERIC"
Type="oracle.jbo.domain.DBSequence"
ColumnType="NUMBER"
TableName="EntityA"
PrimaryKey="true"
IsUpdateable="while_insert"
Domain="oracle.jbo.domain.DBSequence" //Different
RetrievedOnInsert="true">
<DesignTime>
<Attr Name="_DisplaySize" Value="39"/> //Different, but don't think it's important
<Attr Name="_SequenceStart" Value="1"/>
<Attr Name="_SequenceName" Value="EntitiA_SEQ"/>
</DesignTime>
</Attribute>
...This is the bad working version
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityA"
Version="11.1.1.60.13"
DBObjectType="table"
DBObjectName="EntityA"
AliasName="EntityA"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="criminal.model.entities.filiative.EntityAImpl">
<DesignTime>
<AttrArray Name="_publishEvents"/>
<Attr Name="_codeGenFlag2" Value="Access"/>
<Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<Attribute
Name="Entity_ID"
IsUpdateable="while_insert"
DefaultValue="@0" //Different
ColumnName="EntityA_ID"
SQLType="NUMERIC"
Type="oracle.jbo.domain.DBSequence"
ColumnType="NUMBER"
TableName="EntityA"
PrimaryKey="true"
RetrievedOnInsert="true">
<DesignTime>
<Attr Name="_SequenceStart" Value="1"/>
<Attr Name="_SequenceName" Value="EntityA_SEQ"/>
</DesignTime>
</Attribute>
... Hear is the constrain (the god one) related to the key att:
<Key
Name="EntityAEntityAIdCheck10">
<DesignTime>
<Attr Name="_DBObjectName" Value="EntityA_EntitAy_ID_CHECK_10"/>
<Attr Name="_checkCondition" Value='"EntityA_ID" IS NOT NULL'/>
<Attr Name="_isCheck" Value="true"/>
</DesignTime>
<AttrArray Name="Attributes"/>
</Key>
...Hear is the constrain (the bad one) related to the key att:
<Key
Name="EntityAEntityAIdCheck10">
<DesignTime>
<Attr Name="_isNotNull" Value="true"/>
<Attr Name="_DBObjectName" Value="EntityA_EntityA_ID_CHECK_10"/>
<Attr Name="_checkCondition" Value='"EntityA_ID" IS NOT NULL'/>
<Attr Name="_isCheck" Value="true"/>
</DesignTime>
<AttrArray Name="Attributes">
<Item Value="model.EntityA.EntityA_ID"/>
</AttrArray>
</Key>
...Hear is the XML of the EntityB The differences are the same that in EntityA
the key att:
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityB"
Version="11.1.1.61.92"
DBObjectType="table"
DBObjectName="EntityB"
AliasName="EntityB"
BindingStyle="OracleName"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access"/>
<AttrArray Name="_publishEvents"/>
</DesignTime>
<Attribute
Name="EntityBId"
ColumnName="EntityB_ID"
SQLType="NUMERIC"
Type="oracle.jbo.domain.DBSequence"
ColumnType="NUMBER"
TableName="EntityB"
PrimaryKey="true"
IsUpdateable="while_insert"
Domain="oracle.jbo.domain.DBSequence"
RetrievedOnInsert="true">
<DesignTime>
<Attr Name="_DisplaySize" Value="39"/>
<Attr Name="_SequenceStart" Value="1"/>
<Attr Name="_SequenceName" Value="EntityB_SEQ"/>
</DesignTime>
</Attribute>
...this is the bad one
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityB"
Version="11.1.1.60.13"
DBObjectType="table"
DBObjectName="EntityB"
AliasName="EntityB"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="model.EntityBImpl">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access"/>
<AttrArray Name="_publishEvents"/>
<Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<Attribute
Name="EntityB_ID"
IsUpdateable="while_insert"
ColumnName="EntityB_ID"
SQLType="NUMERIC"
Type="oracle.jbo.domain.DBSequence"
ColumnType="NUMBER"
TableName="EntityB"
PrimaryKey="true"
RetrievedOnInsert="true">
<DesignTime>
<Attr Name="_SequenceStart" Value="1"/>
<Attr Name="_SequenceName" Value="EntityB_SEQ"/>
</DesignTime>
</Attribute>
...the key (the god one)
<Key
Name="FkEntityB">
<DesignTime>
<Attr Name="_isCascadeDelete" Value="true"/>
<Attr Name="_referencedKey" Value="EntityA_PRIMARY_KEY_10"/>
<Attr Name="_isForeign" Value="true"/>
<Attr Name="_DBObjectName" Value="FK_EntityB"/>
</DesignTime>
<AttrArray Name="Attributes">
<Item Value="project1.EntityB.EntityBEntityBId"/>
</AttrArray>
</Key>
...the bad one
<Key
Name="FkEntityB">
<DesignTime>
<Attr Name="_isCascadeDelete" Value="true"/>
<Attr Name="_referencedKey" Value="EntityA_PRIMARY_KEY_10"/>
<Attr Name="_isForeign" Value="true"/>
<Attr Name="_DBObjectName" Value="FK_EntityB"/>
</DesignTime>
<AttrArray Name="Attributes">
<Item Value="project1.EntityB.EntityBEntityBId"/>
</AttrArray>
</Key>
...Sorry if is too long.
What might be wrong? It's that enough to determine the error?
Thanks again.
PS: I did try look for NQ1 as kdario said and nothing was found. I had already done regenerate the association as 969750 said and still habe the same error. -
Why Does Live View In DW Not Work With BC Template?
The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??
Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
Re: Why Does Live View In DW Not Work With BC Template?
created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Why is the view of the clip different then the view of the project?
why is the view of the clip different then the view of the project?
Yes you are correct, it is with the setting of the properties.
Where do i report this then if it is not with the SDK but the manual setting of properties.
Also, how do i alter this ussue with the SDK, what are the commands, does it have to be done only by Javascript? -
Why does the view window all of a sudden expand the content of the page I am viewing so that I have to go to "view" and click actual size??
Then a few minutes later, it goes back to expanded again, it is driving me crazy. how can I stop this????
Thanks for any help.There could be a number of reasons, first thing to check is if you are clicking Command + or Command -. The Command 0 keystrokes restore Safari to the actual size. You can also reset Safari by Safari - Reset.
-
Why cant i view adobe tv content on firefox?
why cant i view adobe tv content on firefox?
ive...
reinstalled firefox
reinstalled flash player
adjusted flash player global settings
lots of people are having problems with this. why isn't adobe helping?Hi Jeff,
I am not certain what "the HTML5 player" is.
To repeat my earlier question:
"Why doesn't Adobe address this? Searches reveal that there is a plethora of people having the same problem." See this link (https://www.google.com/search?q=adobetvdoesntworkonfirefoxsite:forums.adobe.com&lr=&hl=en&as_qdr=all&biw=1920&bih=748)
I could search help pages all day long if I didn't have to, y'know... work. This is obviously a problem to which Adobe needs to research the solution.
I am within the requirements of the service stated on the AdobeTV page, yet it doesn't work. Is it too much to ask that Adobe throw me a bone here?
Sorry if I sound frustrated, but I spent hours of my time a couple of months ago, the last time I wanted to use AdobeTV, trying to figure this crap out and finally just gave up.
Cheers,
Paul Fisher
Sent with Sparrow (http://www.sparrowmailapp.com/?sig) -
Why is the viewer distorted and discolored
Why is the viewer distorted and discolored? The second picture is a screen shot of the master file.
Does it appear on the clips if you open them outside of FCP X?
Try trashing the preferences.
Corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
Also trash the Layouts Folder.
With FCP X shutdown, hold down option key and select Go>Library>Application Support>Final Cut Pro . . . trash the Layouts Folder. -
Please explain
why to use view WITH OBJECTHi,
Please have a look the below link:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14220/objects.htm
Regards -
Why my notebook sometimes blacks out, in windows 7, when I watch video online or just browse some web pages which contains quite a lot pictures?
1. I am not sure whether it is the problem of the graphic hardware, relevant softwares or the system itself.
2. I am not sure whether browsing a webpage with a lot pictures would make the graphic hardware, or other hardwares if possible, massively burdened and then just crash.
3. Or if possible, is the reason that the heat dissipation doesn't work well?
I am looking forward to any replies that might be helpful. Really appreciated.it could be heat, not enough RAM, but you don't tell us enough.
There is no reason to assume this is anything other than running Windows natively btw.
Browser of course matters probably the most.
I like IE10 now, but use to use FF until recently. I'd like Chrome except for a few concerns I have over using it, it can eat up a lot of RAM and it builds up HUGE disk cache if you don't clear history and cache on exit and run CCleaner regularly ( good for all browsers )
So assuming 64-bit and 4GB or more and core i5 or better...
Also make sure Wiindow has 10GB of free space or more.
Biggest concern is what happens afterwards and whether you have run a check of your hard drive (chkdsk on startup) or if the problem cascades and gets progressively worse on top of the first - like do you have to do hard restart or able to bring up Task Mgr and kill or better yet, Resource Mgr and see if you have any thread locks.
Safari is not well versed in multithreading and handling what you want to do and are doing. IE9 isi usually good but I found it could not handle a lot of tumblr photo streams and sites. Try Chrome. With Firefox, use noscript, blashblock and see how it goes. -
Help!! Why is there a black part in the X when I try to delete my app? It's covering up the supposed to be white space around the X button
Try:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since they all line up on the left site that could be a hardware problem or maybe a software glitch. I have never seen that problem posterd here before -
How to Save Section to be a dxf document? why Save Section View button is not on?
dear ..
i use adobe Reader xi version 11.0.0 , when i want to use Save Section View button , i fine this button is not on?
my question is :
how to Save Section to be a dxf document? why Save Section View button is not on?
hope to hear your reply !thanks!
best regards!
charles
e-mail: [removed]Hi Sandesh,
Please provide the complete code from print & save button.
Thanks & Regards,
Balamurugan G -
I am from russia and i cant understand why my iphone 4g(black) can not sync..The computer gives an error saying that the synchronization can not be executed because you can not save a copy ... What should I do?
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
HT201210 why it IPAD still black out and fail to switch on again after restore?
Help!! can I get a replacement since I bought this only end April!!! why is IPAD still black out and fail to switch on again after restore? I restore 3 times and still same black out happens,... this is so frustrating!!
tried that but it is now at Error1611, so will need to have them look into the hardware !!! thanks for advice !
-
Sending videos from iphone 4s to pc. Why do I get black screen but have sound
Sending videos from iphone 4s to pc. Why do I get black screen but have sound?
Ok I checked and unchecked the playback via camera yesterday and I got black screen both times.
I could delete the imovie prefs when I go over there today.
I'll try another FW cable but it worked perfectly for importing but what the heck I've got one I'll try it.
Yes camera was set to play and not record.
Plenty of free space -- 131 GB.
I'm pretty sure it's in NTSC DV format, but it's someone else's computer so it could have been changed by someone screwin' around not knowing what they're doing making changes.
PowerMac FW800 (G4), iBook 1.42 G4 SuperDrive Mac OS X (10.4.10)
Maybe you are looking for
-
I love using Image Capture, but every time I launch it, it automatically does a previes of my scanner's flatbed. Most of the time, I don't use the flatbed. I use the feeder to scan multiple pages. My question is this: Is there any way to turn off
-
Is it possible for widgets in dashboard to float over other windows?
I'm trying to assess features in Mavericks in comparison to Snow Leopard (the OS I'm most familiar with). I usually read the Missing Manual for the new OSes, but haven't gotten to all areas yet - it's a big book! Is it possible for widgets in dashbo
-
I want to get rid of my guest user account. It will not let me delete it from the user
I did not have the guest user account available and then after I changed some of my setting for my mail, I noticed that when I logged back in the guest user icon was present. I do not want to have this guest user account on my log in screen. I trie
-
Cash Disc in pymt advise need to post thr f-28 when doc# does not match
Hi The below is the scenerio for posting incoming payment following by our client 1) Creation of payment advise (FBE1) 2) Posting through F-28 by giving payment advise no. in f-28 In payment advises amount field will be Gross amount, Payment amount a
-
HI gurus, we have vendor as customer. I have created vendor master and customer master, and I defined the customer number in vendor master. but I didn't find fine "CLEARING VENDOR WITH CUSTOMER" indicator in Vendor master screen. I'm using ECC6