Why is my wifi looking for a network all the time after working fine for over a year?
My wifi is connected but it's running slow, it drops completely, netflix runs so slow than it drops..etc. I've had the cable people here twice, once I updated my speed to more than doubled my speed and then I bought a very expensive router. Why does my computer wifi keep looking for networks when its already connected? Also, I've notice that my computer is acting like I've had it for 10 years and I've only had for 1.5 yrs. It's slow! It crashes! I have to sign in twice! It takes for ever to load, then it falls asleep after only a few mins even when its plugged in with full power. I'm so sick of this mac! I'm ready to run over it with my mini van and go back to HP for good!
Oh and the screen is unstable! willy nilly all over the place!
ERRORS:
<airportd[34]> _handleLinkEvent: Got an error trying to query WiFi for power. Resetting state variables<airportd[34]> -[CWXPCConnection performScanWithChannels:ssidList:legacyScanSSID:includeHiddenNetworks:mergeScan Results:maxAge:maxMissCount:maxWakeCount:maxAutoJoinCount:interfaceName:waitForW iFi:waitForBluetooth:token:priority:reply:]: !!! SCAN request received 0.0132 seconds after previous scan request from 1386 (Wireless Diagnostics)
ocal com.apple.backupd-helper[47]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wi-Fi Problems in OS X Yosemite (3)
Wireless Diagnostics
Also try turning off Bluetooth.
Similar Messages
-
Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?
What does any of this have to do with the Apple TV?
-
Microcell stopped working after working fine for over a year
Hi everyone, My Microcell stopped working after working fine for over a year
What happens now is that when it boots up all is green but the wireless network bars LED keeps flashing forever.
I know that as part of the normal boot process it first scans all 3G channels to pick the least conflicting ones before it initializes the internal 3G radio. Typically that takes good 10 minutes. However now it never finishes that scan and gets stuck there blinking green forever. Obviously nothing has changed on my side of things; I don't know whether something has changed in the neighborhood in terms of AT&T area controller or what not. Any help will be very much appreciated. Thak you!Answer ALL the questions below as best you can and we'll try to help you.
MicroCell™ TroubleShooting Questions:
Have you read the Tech Guide first? 3G MicroCell Technical Guide by Otto Pylot
Do you have an active postpaid AT&T mobile account?
Is your MicroCell white or black?
Who is your ISP and is your service ADSL, cable, wireless or satellite?
What are your suscribed download and upload speeds as stated by your ISP?
Have you tested your internet speeds (http://www.speedtest.net/)? Please run the test and post your latency, download and upload speeds.
Have you tested your connection for VoIP quality (http://www.voipqualitytest.com/)? Please run the test and post the results that are listed under the "Advanced" tab.
Are you using the basic connection (modem -> router -> MicroCell) or the alternate connection (modem -> MicroCell -> router/computer)? The alternate connection is not possible with the black (DPH-154) MicroCell as it has no Ethernet output but it can be connected directly to the modem to temporarily test the Microcell without the network connected.
Are all of the cables firmly in place?
Do you have a combined modem/router (gateway) or a separate modem and router? What are the makes and model numbers for your equipment?
Have you met the minimum requirements for router settings as outlined in the Tech Guide?
What other equipment (access points, switches, computers, WiFi components, gaming consoles, etc.) do you have connected to your network?
What does the light pattern look like on the MicroCell (power, ethernet, GPS, and 3G)? Are they all a solid green or is any of them blinking green or red, and if so, which one?
Have you done a hard reset of the MicroCell? See the Tech Guide for instructions.
Have you deactivated and reactivated your Mcell using AT&T's MicroCell website?
Does the ac adapter feel warmer than the top of the MicroCell where the vents are? -
The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?
I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........
-
Airport losing my Network all the time
Good morning,
I have set my network several months ago, it was working perfectly fine in the beginning. Now, this is what is happening all the time: after about half an hour being online, it seems like I am not hooked to the internet anymore. The Airport light is green, the signal level is at the highest, the status says "connected", but if I try to access a page, the bar is blank. No other networks show but if I manually type another network that I know of and that is not password protected, it connects to it, and then I can access my page with no problem.
This is not my network, I don't see why I should use a neighbor's network when mine is just set in the same room as my desktop, and above all why I can't catch it with the Airport that seems to say everything is there.
If I want to go back then to my own network, it has disappeared from the list, and then it says it can join back. It takes sometimes half hours before I can join back as if nothing had happened, and then some time later it does it again.
Any idea why it would do that? is my airport box defective?Thank you for your help, Tesserax, I really appreciate it because I admit I am very annoyed (it is getting worse today, or I am less patient because of my own moods, but it seems to disrupt me from working so much).
I have many other networks, but mine is always with the strongest signal. Sometimes it drops to 50% (the highest is around 85%) and the noise increases (the highest has been 40%), and I see no of the described reasons why. All the other networks that appear are all around signal 44% and below
The only electric cable is the computer cable and the cable from the computer to the printer, could it be that making the interference? there is no way I can hook these somewhere else! The airport is hooked to the modem box and that's where the cable is hooked to my home, so I also do not see how I can avoid having those together. Maybe there is something I haven't understood there.
Also I have not understood how I can change anything in the airport. All those numbers seem to be automatically generated, and I don't see where you have a menu that gives you control to how it is set, if I have to reset something, whether it is in the System's preferences (network) or in the Internet Connect, I don't see any setting menu. -
Anyone know the reason why app store in iOS 6 is crashing all the time?
Anyone know the reason why app store in iOS 6 is crashing all the time?
Tried everything. Reset my iPod touch to fresh version of iOS 6 and still issues. I believe that there is a bug.
APPLE: please FIX ALL THE BUGS IN IOS 6!!!!!! Please do it fast!!!I am having the same problem, but I think I might know what's causing it. I just updated my girlfriend's iPhone 4S (same phone as mine) to iOS 6 and was surprised to find that her app store is working just fine. When I opened hers, however, I did notice that the "Categories" and "Top 25" buttons are totally different; and those happen to be the two buttons that are not working for me. Mine shows the same that yours does, while hers has the "Genius" and "Charts" buttons in the place of the two that are not functioning for me. I believe these old buttons are no longer active and therefor are bombing out when attempting to access them.
Now I said I think I may understand the problem, but unfortunately I have no idea what the solution may be. Hopefully this tread doesn't fade away and our problem gets addressed. -
After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other bluetooth devices. I haven't moved to iOS7 yet. Any ideas?
What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either. -
My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up?? I have the OS X Lion system.
As well as what a brody asked :
- do you need more RAM? (run Activity Monitor and see how much free RAM - green - is available)
- do you Restart fairly regularly, e.g. at least once a week, to clear out any swap or temporary files?
- do you need to do maintenance, e.g. clearing out caches and unused logs, etc? -
I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?
Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
I`m using Open Directory, its been working fine for 2 months. But now all of a sudden this very annoying error keeps repeating itself.
It started happen about a week ago,and after a reboot of the server it was working fine, until now. Now the accounts is gone after 1h or so uptime, and after restart all accounts is there, but soon to be disapeared again. Anyone have any suggestion what to look for? And why did it happen in the first place?
For now theres only one user at the office so he uses my admin account (Local user on the server) to connect to shares etc. But in less then a week there will be much more people at the office, so i will need to sort this out ASAP. Appriciate any suggestions/help. thanks in advance.Open Directory; Password Service Server Log:
(A little shortend, nothing seems wrong there?)
Jul 30 2013 09:51:18 456163us Mac OS X Password Service version 387.2 (pid = 139) was started at: Tue Jul 30 09:51:18 2013
Jul 30 2013 09:51:18 873014us RunAppThread Created
Jul 30 2013 09:51:18 873099us RunAppThread Started
Jul 30 2013 09:51:18 873122us Initializing Server Globals ...
Jul 30 2013 09:51:19 820305us Initializing Networking ...
Jul 30 2013 09:51:19 820361us Initializing TCP ...
Jul 30 2013 09:51:39 735055us SASL is using realm "server.xxxx.no"
Jul 30 2013 09:51:39 735100us Starting Central Thread ...
Jul 30 2013 09:51:39 735109us Starting other server processes ...
Jul 30 2013 09:51:39 735117us StartCentralThreads: 1 threads to stop
Jul 30 2013 09:51:39 735152us Initializing TCP ...
Jul 30 2013 09:51:39 735186us Starting TCP/IP Listener on ethernet interface, port 106
Jul 30 2013 09:51:39 735242us Starting TCP/IP Listener on ethernet interface, port 3659
Jul 30 2013 09:51:39 735265us Starting TCP/IP Listener on interface lo0, port 106
Jul 30 2013 09:51:39 735290us Starting TCP/IP Listener on interface lo0, port 3659
Jul 30 2013 09:51:39 735318us StartCentralThreads: Created 4 TCP/IP Connection Listeners
Jul 30 2013 09:51:39 735329us Starting UNIX domain socket listener /var/run/passwordserver
Jul 30 2013 09:51:39 736296us Finished starting other server processes ...
Jul 30 2013 09:51:39 736313us -- Password Server successfully started --
Jul 30 2013 09:51:39 736321us -- Start time: 21 sec, 287 msec --
Jul 30 2013 09:52:19 502436us GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
Jul 30 2013 09:52:19 516404us GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
Jul 30 2013 09:52:19 865774us GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 870922us GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 879988us GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 892772us GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxo.no$}.
Jul 30 2013 09:52:22 897368us GETPOLICY: user {0xfc35f9dcb0b711e28baca820661e5a32, geir}.
Jul 30 2013 09:52:22 904252us GETPOLICY: user {0x9ae96942a73011e2aac5a8206623cd3d, christoffer}.
Jul 30 2013 09:52:22 916530us GETPOLICY: user {0x523107c8ae7911e28baca820661e5a32, anst}.
Jul 30 2013 09:52:22 964934us GETPOLICY: user {0x5841b68eb09611e28baca820661e5a32, fres}.
Jul 30 2013 09:52:23 12619us GETPOLICY: user {0x148c7f5c916811e28cd3a8206623cd3d, admin}. -
Will not allow me to sign into messenger or FaceTime, saying something about connection, but everything is fine and the Mac book air works fine for the wife>
Hi Alexrichard,
I have an article for you that will help you troubleshoot this sign in issue:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Ipod Touch drops off network all the time
I am using a 2nd generation Ipod Touch to control Itunes on a Mac Mini. I am using the "Remote" application on my Ipod. I do not use the Ipod for anything else but remote control. There is no music on my Ipod.
I have the "stay connected" switched ON under remote settings in my Ipod. But almost every time I pick the Ipod up to use it it says:
"Can not connect to the local Network"
Then it generally does connect in a few seconds after I push a button. But sometimes I have to reboot the Mac Mini to get it to work. (I am not sure why this helps becasue I am using my Netgear Modem/router for my Network - not the Mac Mini....). My music library is on the Mac Mini.
Any ideas?
Thanks!- Connect the iPod to your computer. If iTunes sees the iPod then restore the iPOd.
- Next see if recovery mode will allow iTunes to see the iPod so your can restore it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Then try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Then, let the battery fully drain and then charge and try again.
- Last, make an appointment at the Genius Bar of an Apple store. -
After working fine for over a year, 160 quits working and goes into recover
So, I've had my 160gb iPod for awhile, and it has basically worked fine for a while.
Occasionally, it skips, but I just said whatever, and let it be.
Anyway, today I listened to it frequently, and it started to take about 15 seconds to actually start a song that I picked. So eventually, I became tired of it.
I went to play one song, and it skipped it and the other tracks after it.
I had this problem before, but after converting them to .m4a they worked fine.
However, these songs were already .m4a, so there wasn't too much I could really do.
So, I decided to restart the iPod with the standard Hold on off, select-center button at at the same time thing.
And then I tried to turn it back on, and when I did, it informed me that I needed to restore the iPod.
It showed me a snazzy picture of the USB cable, and explained it to me in a few in a few other languages.
So, I plugged it into the computer to try and get around it, and it informed me that the iPod was in recovery mode?
I've never heard of this, and I ultimately have no idea what to do. I don't want to have to restore, but I guess I'm going to. I'd really like to know why it freaked out on me though.See if this helps.
iTunes has detected an iPod in "recovery mode". -
Illustrator CC 2014 crashes all the time after installing Yosemite 10.10 - why?
Hi there,
as said above my IA crashes all the time.
I am working with Creative Cloud and latest OSX version (Yosemite 10.10). A few days ago I chatted with a team member of Adobe but all recommended was to install a complete new Admin on my MacBook Pro. That would take me almost two days to install and configure all my stuff from the scratch.
Illustrator crashes when ...
I open a ai-file from InDesign to edit it. The splash screen loads but then this appears
It's german, but you all know what it says: "Unexpected failure - ignore / try again / send to apple" If you click on "Send to apple" it loks like this:
I sent it a thousand times to Apple, but haven't heard anything yet.
I open IA regular from the dock
splash screen appears
everything's fine till you click anything (e.g. CMD+N)
then it crashes immediately
What I already did
reinstall IA
reinstall complete suite
cleaned all folders belonging to Adobe
start in safe mode
Thanks for reading all this stuff.
Hopefully anyone has an idea what I can do.
Wisdom of the crowd - here we go.
Best,
JaninaDear adobe & community,
only a few weeks later - it crashes again...
Yosemite 10.10.2
AI latest version
MacBook Pro (Retina, 13", 2013)
I read all support tickets. I checked if there is a drivers for my Wacom (nope). I installed a new admin (AI crashes as well). I updated Java again (no help)
I have no idea what to do.
This is what happening:
- I click on the AI icon
- AI opens with the welcome screen
- Yosemite 10.10.2 / AI newest version (Creative Cloud)
- whatever I click there it crashes and comes up with the following error message (sorry in advance for all the code)
"Process: Adobe Illustrator [1253]
Path: /Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier: com.adobe.illustrator
Version: 18.1.1 (18.1.1)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Illustrator [1253]
User ID: 502
Date/Time: 2015-02-05 11:30:33.307 +0100
OS Version: Mac OS X 10.10.2 (14C109)
Report Version: 11
Anonymous UUID: D6DD2548-AB1C-9CC8-3611-C038C37DB42D
Time Awake Since Boot: 1600 seconds
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000010
VM Regions Near 0x10:
-->
__TEXT 0000000100000000-00000001015c0000 [ 21.8M] r-x/rwx SM=COW /Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_pthread.dylib 0x00007fff8af355c1 _pthread_mutex_lock + 23
1 com.apple.CoreFoundation 0x00007fff86cdb721 CFRunLoopStop + 49
2 com.wacom.WacomMultiTouch 0x000000010ae680dd CMacMultiTouchAPI::~CMacMultiTouchAPI() + 83
3 com.wacom.WacomMultiTouch 0x000000010ae888a2 WacomMTInitialize + 136
4 com.adobe.dvaui.framework 0x0000000109ebe22c dvaui::ui::TouchInterface_Wacom::TouchInterface_Wacom() + 140
5 com.adobe.dvaui.framework 0x0000000109ebce78 dvaui::ui::TouchInterface_Wacom::GetInstance() + 40
6 com.adobe.dvaui.framework 0x0000000109eb1dab dvaui::ui::PointerEvent::PointerEvent(dvaui::ui::PointerEvent::Action, dvacore::geom::PointT<float> const&, dvacore::utility::Flags<unsigned char> const&, dvaui::ui::OS_Event const&, dvaui::ui::PointerEvent::SubType) + 75
7 com.adobe.dvaui.framework 0x0000000109e93142 dvaui::ui::MouseEvent::MouseEvent(dvaui::ui::PointerEvent::Action, int, int, dvacore::geom::PointT<float> const&, dvacore::utility::Flags<unsigned char>, dvaui::ui::OS_Event const&, dvacore::geom::PointT<int> const&, dvaui::ui::PointerEvent::SubType) + 50
8 com.adobe.dvaui.framework 0x0000000109f245a6 dvaui::ui::OS_View::UI_DispatchPlatformMouseMoveEvent(dvaui::ui::OS_Event const&, bool, bool) + 422
9 com.adobe.dvaui.framework 0x0000000109f21d56 dvaui::ui::OS_View::UI_DispatchEvent(dvaui::ui::OS_Event*) + 198
10 com.adobe.dvaui.framework 0x0000000109f21c66 dvaui::ui::OS_View::UI_HandleOSEvent(dvaui::ui::OS_Event*) + 22
11 com.adobe.dvaui.framework 0x0000000109f236b6 dvaui::ui::OS_View::UI_HandlePlatformEvent(NSEvent*) + 70
12 com.adobe.dvacore.framework 0x0000000109719d0c int dvacore::config::ErrorManager::ExecuteFunction<void>(boost::function0<void>*, void*) + 28
13 com.adobe.illustrator 0x00000001004e6dd2 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4477314
14 com.adobe.dvacore.framework 0x0000000109719da3 void dvacore::config::ErrorManager::ExecuteFunctionWithTopLevelExceptionHandler<void>(boost::f unction0<void>, bool*) + 99
15 com.adobe.dvacore.framework 0x000000010971b250 void dvacore::config::ExecuteTopLevelFunction<void>(boost::function0<void>, bool*) + 160
16 com.adobe.dvaui.framework 0x0000000109f2fb3d -[DVAMacContainerView mouseEntered:] + 157
17 com.apple.AppKit 0x00007fff92f0ee19 -[NSTrackingArea _dispatchMouseEntered:] + 75
18 com.apple.AppKit 0x00007fff928d81e2 -[NSApplication sendEvent:] + 3560
19 com.adobe.dvaui.framework 0x0000000109f27c01 -[DVAMacApplication sendEvent:] + 593
20 com.adobe.exo.framework 0x000000010ab14198 -[ExoMacApplication sendEvent:] + 568
21 com.apple.AppKit 0x00007fff92a75fcf -[NSApplication _realDoModalLoop:peek:] + 770
22 com.apple.AppKit 0x00007fff92aaf1f4 -[NSApplication runModalSession:] + 71
23 com.adobe.dvaui.framework 0x0000000109f165ce dvaui::ui::OS_Dialog::ModalLoop() + 286
24 com.adobe.dvaui.framework 0x0000000109f1619c dvaui::ui::OS_Dialog::RunModal() + 172
25 com.adobe.illustrator 0x0000000100a949a4 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 5156244
26 com.adobe.illustrator 0x000000010058a6e9 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 5147289
27 com.adobe.illustrator 0x000000010058aa62 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 5148178
28 com.adobe.illustrator 0x0000000100781e3e AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 1933870
29 com.adobe.illustrator 0x0000000100781a1c AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 1932812
30 com.adobe.illustrator 0x0000000100ab64d1 std::_Rb_tree<SPSAS, std::pair<SPSAS const, SPSuite*>, std::_Select1st<std::pair<SPSAS const, SPSuite*> >, std::less<SPSAS>, std::allocator<std::pair<SPSAS const, SPSuite*> > >::_M_insert_unique(std::pair<SPSAS const, SPSuite*> const&) + 22145
31 com.adobe.illustrator 0x0000000100ab14f3 std::_Rb_tree<SPSAS, std::pair<SPSAS const, SPSuite*>, std::_Select1st<std::pair<SPSAS const, SPSuite*> >, std::less<SPSAS>, std::allocator<std::pair<SPSAS const, SPSuite*> > >::_M_insert_unique(std::pair<SPSAS const, SPSuite*> const&) + 1699
32 com.adobe.illustrator 0x0000000100ab433a std::_Rb_tree<SPSAS, std::pair<SPSAS const, SPSuite*>, std::_Select1st<std::pair<SPSAS const, SPSuite*> >, std::less<SPSAS>, std::allocator<std::pair<SPSAS const, SPSuite*> > >::_M_insert_unique(std::pair<SPSAS const, SPSuite*> const&) + 13546
33 com.adobe.illustrator 0x0000000100764fe7 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 1815511
34 com.adobe.illustrator 0x000000010096903a AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 3929130
35 com.adobe.illustrator 0x000000010044b31c boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 3839692
36 com.adobe.illustrator 0x00000001004742b6 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4007526
37 com.adobe.illustrator 0x00000001005f964e AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 326206
38 com.adobe.illustrator 0x00000001005f9296 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 325254
39 com.adobe.illustrator 0x0000000100473fb8 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4006760
40 com.adobe.illustrator 0x00000001004e1bbb boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4456299
41 com.adobe.exo.framework 0x000000010ab0ee5d exo::app::AppBase::InvokePostEventProcessing(dvaui::ui::OS_Event const&) + 13
42 com.adobe.illustrator 0x00000001004e6dd2 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4477314
43 com.adobe.exo.framework 0x000000010ab0efe3 exo::app::AppBase::PostEventProcessing(dvaui::ui::OS_Event const&) + 99
44 com.adobe.dvacore.framework 0x0000000109719d0c int dvacore::config::ErrorManager::ExecuteFunction<void>(boost::function0<void>*, void*) + 28
45 com.adobe.illustrator 0x00000001004e6dd2 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4477314
46 com.adobe.dvacore.framework 0x0000000109719da3 void dvacore::config::ErrorManager::ExecuteFunctionWithTopLevelExceptionHandler<void>(boost::f unction0<void>, bool*) + 99
47 com.adobe.dvacore.framework 0x000000010971b250 void dvacore::config::ExecuteTopLevelFunction<void>(boost::function0<void>, bool*) + 160
48 com.adobe.exo.framework 0x000000010ab142d8 -[ExoMacApplication sendEvent:] + 888
49 com.apple.AppKit 0x00007fff92764608 -[NSApplication run] + 711
50 com.adobe.exo.framework 0x000000010ab13bb8 exo::app::OS_AppBase::RunEventLoop() + 56
51 com.adobe.illustrator 0x00000001004e3cf5 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4464805
52 com.adobe.illustrator 0x0000000100472dc6 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 4002166
53 com.adobe.illustrator 0x0000000100463c60 boost::exception_detail::copy_boost_exception(boost::exception*, boost::exception const*) + 3940368
54 com.adobe.illustrator 0x0000000100003424 0x100000000 + 13348Thread 1:: Dispatch queue: com.apple.libdispatch-manager
Sorry once more for all the coding, but I have no idea what's important.
@adobe - please help me.
@community - thanks for helping as well.
Thanks you guys.
Janina -
The hdmi adapter no longer works, and I tried it on different tv, different hdmi cables, apple's adapter still don't work. My iOS is 5.1 by the way. HDMI cables work fine for other devices, connect it to my computer, works fine, connect it to dvd player works fine. So what is going APPLE? I splashed out SGD59 for this handy adapter, and it no longer works after a month!!!
ipadfan2012 wrote:
Hi yes, I've turned my new iPad off and turn it back on again, along with my Tv, still did not work
No. Meg was referring to a reset:
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
Maybe you are looking for
-
Scanning Multiple Pages HP 8500A
Hi, I want to scan multiple pages into one pdf document. When I hit scan on the printer, it will scan and then send to my computer. It won't give me the option to add another page to the pdf. I need to know how to rectify this as I have many page
-
How to get notified about new post created for Oracle istore
I want be active part of post created in iStore or EBS. How can I get immediately get notified (email) about new post created in iStore or EBS (OTN Forum)? Currently I get immediate email about post that I am watching ie post I created or if someone
-
How to create new file folders?
I'm can no longer create new file folders. Can someone help me? I've tried everything.
-
How to use Application Integrator for iView Creation
Hi all any one can help me how to create an iView(webshop b2b iview) by using the Application integrator in portal Regards sunil
-
Hi, I Am using the t3 protocol to connect to the server in the BEA weblogic, now I am porting my beans to IPLANET, now how can I make use of the Attached piece of java code, the file makes use of the table called "ts_lookup". java file package com.se