Why is my wired keyboard not working?

Hi All,
Most of the time if I plug my wired keyboard (standard Apple w/numpad) before I start it up it works OK, however if it is unplugged whilst it is on, then plugged back in again it won't be recognised. Other non wired keyboards are fine. Even if I shut-down the MacBook Air ('13), plug the keybaord back in, then start up, it does not work. What's weird is that it normallys resets itself by the next working day (I only use the keyboard at work, take my Mac home).
Any help would be greatly appreciated, I miss having the two extra USB's!
Cheers,
Nathan

Good Morning SwimmingNathan,
If you are having issues with your wired keyboard, try a different USB port. Then try resetting the System Management Controller (SMC) and PRAM. Here's how:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
If you tried all of these steps and your issue persists, contact Apple technical support or take your keyboard to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Cheers,
- Judy

Similar Messages

Why is my numeric keyboard not working on windows 7 via boot camp?

What ever I use the numeric keypad on the Apple Wired Keyboard on Windows 7 boot camp. It does not work. I have to use the number on the above of my letter case part. I tried using the numeric keys on calculator or games. It functions more like fn, home, page down, page up. WTH? Why is it functioning like the keys between the numeric keypad and keyboard? The drivers installed just fine and I got all the windows updates along with apple updates. I even went to keyboard options in boot camp control panel and it still does not work.

Here is your answer - just found it on MacRumors as I was experiencing the same problem. Ready - got a pen and pencil available: Hit "Clear" lol, yup, that is your on off button for the numeric pad. :-) Be sure to share with others.
The "Clear" Button is located above the number 7. 65431354684318643516879 <---- numerica keypad fun.

Brand New iMac and wired keyboard not working

I just bought a new iMac.The wired keyboard seems to work, the mouse is plugged into the keyboard and that works, and I can, somewhat make changes to the volume and other small changes. The ESC key works (I can turn off VoiceOver)but... I can not even get the computer up and going. I can not put in my name or other registration information.
Any ideas if the keyboard has some kind of other settings that I need to turn off. There is no software or anything else in the Mac that I know of. It is brand new and just arrived today.
Anyone have any suggestions?

I'm so sorry. I know this a bummer. But better to take it back. When you take it in, if they boot it and get it to work, make sure and shut down the iMac, wait about ten seconds and press the power button. Make sure it boots to the Desktop and that your keyboard functions as it should. Just make absolutely sure it works before you bring it back home. In fact, since you could not get through the registration process, perhaps they will go through that with you since had problems with it. Something isn't communicating between the iMac and the keyboard. Could be the USB ports, software/hardware ... hopefully they'll repair it to your satisfaction or replace it.
Carolyn
Message was edited by: Carolyn Samit

New small WIRED keyboard not working with bootcamp

Greetings from Stuttgart, Germany
I just bought one of these new small WIRED keyboards for my macbook pro (early 2008/not unibody).
It's working fine with OSX but not with my bootcamp vista business x64: the fn-key is not recognized. After inspecting the device manager I found out that the keyboard is not recognized as an Apple keyboard like my old one (with numeric keys).
Afer updating bootcamp to version 2.1 I uninstalled the keyboard from the device manager, plugged it in again and it was still not recognized as an Apple Keyboard
Is there a way to manually force vista to use apple keyborad driver? Or is there an update for bootcamp on its way to solve the problem?
Best wishes,
Wolfgang Gross

UPDATE: a possible solution that is NOT working:
in device manager, for both USB Human interface devices associated to the a hardware id (05AC/021E) of the keyboard:
Update driver > browse my computer.. > let me pick.. > show compatible hardware.. > Apple Inc./Apple keyboard 2.1.0..
Doesn't change the keyboard (mis-)behaviour

Z and v keys on wired keyboard not working

Been very pleased with the reliability of my 24" iMac to date, with very few (if any) problems worth mentioning till the last few days when the z and v keys on the fullsize aluminium keyboard originally supplied with the iMac no longer work?
Can anyone shed any light on why these keys refuse to work. Is it a case of throw the keyboard away, or is it a software issue?
I've rebuilt the permissions using Disk Utility which did find quite a few errors, but it didn't fix the problem of the missing Z and V buttons on the keyboard.
It may just be simply that the keyboard is worn out, but I'm no journalist and don't drink Coke or eat McDonalds burgers over the keyboard so see no reason why these particular keys have reason to stop working.
And please note, I'm typing this from the smaller wireless keypad which explains why I can still type the Z and V keys!

Thanks for the advice, I dug out my old G3 Mac keyboard, plugged it in, and it worked, so it is the keyboard that is faulty rather than the Mac - can't believe it's only lasted 5 years
Guess that it means a trip over to my local Apple Store to buy another keyboard, and knowing my luck, a few other items whilst I'm in there

Apple usb wired keyboard not working for MBP pro w/ 0 for stop on numeric k

Just got logic 8 and noticing that it does load up quicker with the new os update.
I'm going through the first getting started manual and I have a apple usb keyboard attached to my mac book pro.
When I press 0 on the numeric keypad it doesn't stop the sequencer it just plays this soft like error sound or something. space bar works for stop however.
Am I in the correct mode or what not? when I press 1, 3, 6 the views change, if there are different modes for the numeric keypad.
I need to get that 0 key working for stop as it says in the first getting started manual on page 18 under "To start and stop playback:"
my setup
[img]http://i100.photobucket.com/albums/m18/rokuez/IMG_0282.jpg[/img]

The zero button doesn't work for screensets - there are no screensets with a zero in (ie, it goes from 9 to 11, there is no 10).
If you want your zero key to do something, use the key commands window to assign it to whatever you like.

Why does my mac keyboard not work properly and is to do with the extra RAM?

Like someone else who has posted on this forum I have a problem with my Apple Pro Keyboard (usb, white, english) The keyboard has developed a fault which has resulted in the tab, caps lock and some other keys near them refusing to work. The caps lock light illuminates at startup but thats about it.
I've run various checks, reset my logic board, unplugged all the cables I can and still nothing. I recently installed two 512mb memory things boosting the machine's memory to 1.5gb. I have since done a full zero install (which was after the fault occured) but the problem persisted.
Is the memory the cause of this issue or is it time to get a new keyboard? I tried to run the apple hardware cd that came with the machine but it refuses to show up on the desktop and I cannot boot from it.
Any help would be very VERY much appreciated.
Also...is there any way of contacting apple with this? The contact us section pretty much just points back to the support site which doesnt have a solution.

nope that doesnt seem to be it. The caps lock light comes on at startup..so it seems it has the capability to work.
the keys which dont work seem to be:
caps
tab
escape
the squiggly thing next to left shift
and the key next to one
thanks for the suggestion though

Why is the intelligent keyboard not working properly

I cannot use formulae or perform other functions in numbers on my ipad. The correct keyboard is not opening up when double tapping any cell?

Not quite sure what you mean by "correct Keyboard". Do you mean the correct functional selection for the cell (Number, Date/Time, Text, formula), or somethign else? I beleive the default is nor number, but it should shift to a different one depending on the current format of a cell.

Why does my bluetooth keyboard not work in iPad 2 safari?

It works great in notepad. I'm using Google Docs and I cannot type in the form.

Apple support article.
Wireless Mouse and Keyboard Troubleshooting

Why is Keyboard not working?

Why is my MacBook keyboard not working?

try reinstalling whatever operating system you have. worked for me. i have a 2010 model. i hope this has helped you.

Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

Yes. you should keep your media in iTunes, and indeed you should also keep a backup of your library as well. if you have the device set up for manual management then the content would remain on it when deleted from the library, but you would have no way to restore the device if there was a problem.
See also: Getting iTunes & Windows Media Player to play nicely
tt2

Why won't my imac recognize a wired keyboard to work with a wireless track pad?

why won't my imac recognize a wired keyboard to work with a wireless track pad?

Which model iMac are you using?

I cant get the number pad on the right side of my wired keyboard to work

i cant get the number pad on the right side of my wired keyboard to work. when i puch a key, my computer will either freeze or it will do nothing. Plz help me. My mac is an Intel-based mac, Running off of Mac OS X 10.4.10, not the one made out of aluminum. what should i do?

Hi, it's the old favorites - Repair Permissions, Run OnyX Maintenance App. Reboot, reset Keyboard/ Mouse settings, run Tech Tool. Try another usb keyboard on the mac or try your k/b on another computer (laptop or desk) - If have AppleCare - Call Apple. You can get a new KensingtonMac USB K/B for around $30.00 online..L

T40 KEYBOARD NOT WORKING AFTER STARTUP

IBM THINKPAD LAPTOP
T40 237372M
OS WINDOWS XP PRO SP3
•86 key keyboard with imbedded numeric keypad and
integrated UltraNav dual-pointing system, featuring TrackPoint and customized touch pad
SUBJECT; KEYBOARD NOT WORKING
AFTER STARTUP UNABLE TO OPEN SOFTWARE OR USE TEXT IN NOTEPAD AND OPENOFFICE
I HAVE A TEMPORARY SOLUTION TO OVERCOME THIS PROBLEM BY;
1 )USING MOUSE OPEN START/ THEN NOTEPAD
STILL UNABLE TO ENTER TEXT
2) OPEN START/ONSCREEN KEYBOARD CLICK ON LOCK THEN EXIT
3)GO BACK TO NOTEPAD ENTER TEXT, NOW WORKING I THEN EXIT
WITHOUT SAVING
I TRIED REINSTALLING XP AND LOST MS WORD THAT IS WHY I AM USING OPEN OFFICE
I THOUGHT IT MAY HAVE BEEN THE SP3 UPDATE BUT AFTER USING IBM SYS REINSTALL
DURING RE INSTALL I WAS UNABLE TO USE TEXT FOR WINDOWS LOGIN
THE ONLY KEYS TO USE WERE ÁÉÍÓÚ BEING LATIN CHARACTERS WITH ACUTE SIGN
CAN ANYONE CAN HELP ME THANKS

Hi and welcome to the forum!
Does the keyboard work fine inside the BIOS?
Also try booting from LiveCD of Ubuntu, if issue remains then the keyboard is faulty.
Keep us informed.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

Why is my wired keyboard not working?

Similar Messages

Maybe you are looking for