Why is OAS 4.0.8.1 half the size of 4.0.7.x ??

I know this is off-topic, but there is no forum for OAS.
OAS 4.0.7.x NT approx. 210MB
OAS 4.0.8.1 NT approx. 108MB
Is 4.0.8.1 available here from technet a non-enterprise edition??
null

I suggest you to try Hello world example first.
Installing Jservlet application and catridge is not a problem at all as long as you follow the procedure given.
I used JDeveloper to create a JServlet. You may go to 'sample code' section of the OTN to see the procedure to create JServlet.
set the virtual path / physical path correctly.
Sometime, it is necessary to reboot the system. System keeps some information in the buffer and keep giving old pages.
For example, we created a JServlet with a message 'Hello World'. It worked fine.
We changed the program to display 'Hello Jay World'. We continued to get only 'Hello World', not 'Hello Jay World'.
When my friend suggested me to reboot the machine, I did it with a little bit of hesitation. But, it worked.
I have installed 8i, OAS in one system and working in the same system.
null

Similar Messages

Why in the new versions are the tabs half the size than in version 30?

When I upgraded, the tabs were half the size than in version 30.

Hi jjalarie, your question was about "size" without specifying what dimension. Thank you for clarifying that, but maybe you could have been nicer about it.
What two versions are you comparing, exactly? The currently available version is 33.1 but the forum software detected your version as Firefox 30.

4K TV not recognized correctly: MacBook Pro Mid2014 15" reports a Samsung UE40HU6900 4K TV as 8K (7680x4320). This results in an ugly, washed out image half the size it should be. Is there a fix for this? (OSX 10.10.1)

MacBook Pro Mid2014 15" reports a Samsung UE40HU6900 4K TV as 8K (7680x4320).
This results in an ugly, washed out image half the size it should be. If you turn off scaling everything is tiny as 8K are displayed on a 4K screen. To get the actual 4K resolution you have to turn on scaling. Still 8K is transferred to the device, but doubling the data lines makes the picture look washed out and create obscure effects for line borders.
Did anybody encounter this problem before? Is there a fix for this? (OSX 10.10.1)

You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store to have the machine tested.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

My safari is half the size how do I get it back to normal?

My safari is half the size how do I get it back to normal?

I'm Glad we could help. I think you'll find the many knowledgeable people here can answer most of your questions.
Captfred

G710 The OEM partition was half the size of the hdd – 465,76 GB

Lenovo G710 without OS (only DOS).
I installed Windows 7 (64 bit) on it. The OEM partition was half the size of the hdd 465,76 GB. Everything is good it is a small OEM partition, but there is already too much . Can i delete it without consequences? And there does not store any important hiden files?
Moderator Note; subject edited

Hi Devidas,
I would suggest not deleting the OEM partition, as it contains system hidden files
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

How come my iweb template is half the size of my web page is their any way to expand it.

How come my iweb template is half the size of my web page is their any way to expand it.

The Inspector is the blue circle with the I.
The Inspector has 10 icons.
Each icon represents a purpose :
Adding hyperlinks,
Changing the textformatting,
Changing the width and height of objects,
Changing the page settings,
If you're familiar with a wordprocessor you will recognize most icons.
There's also an often ignored word in the menu bar : HELP
See if that helps you any further.

Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

What setting have you chosen in the view menu? Fit to Screen or Window.
And, in Preferences what have you set for Display?

We converted a flash online course for iPad use. It works well on iPad2 5.1 but not on OS 6. The player screen is reduced to half the size. Any help?? Thanks.

We converted a flash online course for iPad use. It works well on iPad2 5.1 but not on iPad2 OS 6. The player screen is reduced to half the size. Any help?? Thanks.

We converted a flash online course for iPad use. It works well on iPad2 5.1 but not on iPad2 OS 6. The player screen is reduced to half the size. Any help?? Thanks.

I am wondering if apple could make an ipad about half the size? It would be easier to carry and would be easier to read than an Iph one.

I am wondering if apple could make an ipad about half the size? It would be easier to carry and would be easier to read than an Iphone.

Apple's engineers have apparently decided that the iPhone/touch/iPad and MacBook fit the most popular needs.
Did you have a developer related question?

The Wackiest thing, Numbers match, but it's half the size

Ok,
This is the code (document class).
public function LoadingDoors()
               //Check for a Reference to the stage.
               if (stage){
                    //already have stage access
                    onAddedToStage();
               } else {
                    //need to obtain stage access
                    addEventListener(Event.ADDED_TO_STAGE, onAddedToStage);
          private function onAddedToStage(event:Event=null):void
               //remove the listener as it is no longer needed
               removeEventListener(Event.ADDED_TO_STAGE, onAddedToStage);
                        //Align the content to the top left of the stage.
               stage.align = StageAlign.TOP_LEFT;
               trace("stage width from Doors " + stage.stageWidth);
               trace("stage Height From Doors " + stage.stageHeight);
               this.width = stage.stageWidth;
               this.height = Math.round(stage.stageHeight);
               trace("Doors Width after assignment " + this.width);
               trace("Doors height after assignment " + this.height);
The following traces out.
stage width from Doors 1264
stage Height From Doors 685
Doors Width after assignment 1264
Doors height after assignment 685.05
First odd thing is the 685.05 value, when there is a math.round(), does not seem to be rounding it.
Second and more important is when I look at my Flash player, it is at the dimensions shown, 1264x685, however the swf, shows the same dimensions 1264x685.05 but yet only takes up half the swf player screen in the Y axis. The x axis of the swf stretches to fit.
example image:
Anyone have any Ideas why this might be happening?

Sounds like you turned on Digital Cinema Desktop Preview. Under the View menu in the Finder bar, select External Video and make sure it's turned to Off.
I've seen weirder.

Why are my cropped images not printing at the size I have cropped them to?!

Hey!
I know how to crop images to specific sizes using either the rectangular marquee or crop tool. However, I am needing to print a number of small images, so want to compile them into one document to save paper. Once the image is cropped, it shows up in 'image size' as being the required size, however, when I copy and paste it into another document in an attempt to arrange it on a page with other cropped images, the images come out at about half the specified size when I print them.
Is it to do with the view I am using, because it doesn't seem to matter whether I set it to 'print size' or 'actual pixels'?
I can't seem to find an answer to this, and I'm sure that I didn't have a problem with this when I was using photoshop more regularly a few years ago!

Hello,
You need to ake sure the target document and the source documents have the same"resolution", in other words the same PPI.
You could also use the Edit>Place command, which will respect the print dimensions of the source photo, but import it as a Smart Object.
CB

When I export my RAW files to JPEG they're about half the size, is that right?

So, I've been using Aperture for about 2-3 years. I always shoot in RAW and then export to JPEG onto my desktop so I'm able to burn a disk. In the past my JPEG size is about 2/3 the size of my RAW files. Now, it's about 1/2. (ie, 23.72 MB in RAW is about 12.3 MB in JPEG) I'm not understanding why. All my presets are to keep the original size. I want my friends to have the full file size so they can go and get their own prints done...
Thanks so much for anyone's help!
Misty

Misty,
Lots of unknowns. Is it the same camera shooting the RAW. Is the RAW in both cases set the same -- with some it can be either lossless compressed or totally uncompressed RAW? Also bit depth can be set differently with some -- what type of camera are you shooting?
Is the JPEG compression set to 12 in both cases (size of 12.3 MB would likely indicate 12)?
Ernie

Video size during full screen show up as half the size

I was watching a south park episode and wanted to close it. The option to get out of full screen wasn't working so I right clicked the screen which brought up a menu. Choices were Half screen through full screen and i clicked half screen. Now whenever I try to full screen it always shows up with a really small screen and i cannot change it.
I have gone through all the options and nothing lets you control the size of the full screen so i am guessing this is a bug. Any help would be great

Just press CTRL + 3 while in Fullscreen "mode" to enable the video size to "Fit To Screen".
You probably pressed CTRL + 0 at some point, reducing the video size to half size while in fullscreen mode.
Cheers!

Exported file is half the size that FCPX said it would be

I'm making a movie montage, project properties are as follows:
1280x720p
25 fps
48 kbps audio bit rate
Using the Export File option, the settings match what's above, with H.264 being the codec (format is quicktime). It says the file size will be 482 MB, but when I export, the resulting file is 209mb. The picture quality isn't that good, because the bitrate is half what it should be. Why is this happening?

Sorry, for some reason I was unaware there was an "Export File" option. Unless I am using special Compressor presets, I usually use "Master File".
I have just done a quick test and the estimated size was 207MB whilst the finished video was 138MB.
However the quality is perfect and the actual size is the correct one for the ideal bitrate.
Frequently the estimated size is way off the mark.
Russ, what's the difference between "Export File" and "Master File"?

Dvcpro 50 file half the size it should be

I had a Dvcpro 50 tape captured by a service bureau today. The file size is half what I calculated it would be and (viewed by quicktime) looks much worse than it did on the monitor during shooting. Quicktime says it is DVCpro 50, 720x480, 29.97, 59.08 mb/sec, 103 min.
(all what I expected) BUT it also shows the file size of 26.34 Gig which is exactly 1/2 what both my calculations and the video space calculator say it should be. And, as I mentioned it doesn't look good either. (my DV backup looks better!) What did the service bureau do wrong? thanks

Dunno, but I'd have it redone for sure. Sort of sounds like they may have used an analog output from their player to a capture card, and doing that can degrade the signal. The File size is odd though. Can't quite figure out what happened there, but in any case, I'd have them redo it. Have them capture via SDI or Firewire, and use FCP to do the job.
Jerry

Why is OAS 4.0.8.1 half the size of 4.0.7.x ??

Similar Messages

Maybe you are looking for