Why is one of my contacts not able to send me any messages or calls when i can call or message them

one of my contacts cannot send me messages or call , but i can call or send them messages , could i have blocked their number  by mistake

It is a carrier issue if it's SMS and only some of the contacts.  It may be your carrier or the carrier that your friends are using or the handoff between carriers.
Apple has nothing to do with it.

Similar Messages

  • I am not able to send/receive text message on my N...

    Hello:
    I bought a Nokia 5800 in India last summer. I used a local SIM card (Airtel) when I was there. I was able to send/receive text messages when I was in India.
    I came back to Chicago and replaced the Airtel SIM card on my 5800 with my AT&T sim card. I have a pay-as-you-go service with AT&T. I had used a Sony-Ericsson Z300a phone with my AT&T service before I bought my 5800. I did not have any problems sending/receiving text messages with the Sony-Ericsson phone using my AT&T SIM card.
    I don't have any problems using my 5800 with my AT&T SIM card for calling or sending/receiving multimedia messages. I just cannot send or receive any text messages. I have checked the message center number setting on my 5800 and it appears to be correct. I have also done a hardware reset of the 5800 and the problem remains.
    Any clues?

    Hello parsar. Even if you have the correct Message Center number there, it's worth a try to delete the existing one and enter the correct one afresh. Make sure you have the latest firmware on your phone, and that there are no applications that may interfere with sending/receiving sms, like some filtering software.
    Hope this helps
    And, pakiboy, resetting to factory settings (by typing *#7780#) will NOT delete anything in the phone memory.
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

  • Since yesterday I'm unable to send emails alleging I have exceeded the maximum number of emails per day, but I had only sent out 24 and NO bulk emailing -  (much less than 1000 as per the website) and I'm STILL not able to send emails.Any advice?

    Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing -  (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • 3G Setting - not able to send SMS text messages

    I have a £GS iphone. Can anyone explain why my SMS messages fail to send if the 3G setting is enabled but it will send when 3G is disabled. It makes no difference whether I have a strong 3G signal or none at all.

    I suggest contacting your carrier. I don't believe this is an iPhone problem since you are able to send SMS when connected via EDGE or when 3G network access is off. Although technically data, SMS is exchanged over the same network as calls - not via the carrier's data or internet network.

  • Not able to send an SMS message to a specific person because it says theres a v/m???

    I reviewed all the posts and couldn't find information on this for a specific contact.
    I can SMS message everyone in my contact list except for 1 person. Everytime I bring his name up it says there is a voicemail and doi want to call voice mail. It never gives me any other option.
    Remember, this is specific to 1 contact.
    1. I went into the options and set it to none under call logging. No change!
    2. I went into voice mail options on Verizon and set it to no texting when voice mail. No change!
    3. I even went so far as to delete the contact, created a new contact with his info in it. It still came up with that voice mail text and doesnt allow me to do anything but call him or call voicemail.
    Kind of at a loss here.
    Any help would be appreciated.
    Again...I did look but there wasn't a thread specific to 1 individual contact!!!

    Nevermind...I actually dug deeper and found the same thread. I tried to delete this one but couldn't find a way to do it.

  • Not able to send whats app message more than 3 minute's length

    Hi,
    I am getting one strange problem while trying to send a video through whats app in Iphone 6.
    Video length is more than 6 minutes i.e 6.53 minutes approx.
    but it always send only 3 minute video to the receiver.
    Steps:
    Open what app
    select contact person
    choose send message
    select a option to "Add Existing Video"
    Select video
    and now it will show 3 minute in the top, where Video shown in frames.
    and receiver also receive only 3 minute video.
    Please help, is it a issue in Iphone 6 or where?
    BR,
    -Prince Gupta

    Hi Srini,
    OS is XP
    Database = 10g
    EBS - 11.5.10.2
    When i tried with simple code like below i am getting mail .
    CREATE OR REPLACE PROCEDURE APPS.send_mail (p_sender IN VARCHAR2,
    p_recipient IN VARCHAR2,
    p_message IN VARCHAR2)
    as
    l_mailhost VARCHAR2(255);
    l_mail_conn utl_smtp.connection;
    BEGIN
    SELECT value value1
    INTO l_mailhost
    FROM v$parameter
    WHERE name like '%smtp%';
    l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
    utl_smtp.helo(l_mail_conn, l_mailhost);
    utl_smtp.mail(l_mail_conn, p_sender);
    utl_smtp.rcpt(l_mail_conn, p_recipient);
    utl_smtp.open_data(l_mail_conn );
    utl_smtp.write_data(l_mail_conn, p_message);
    utl_smtp.close_data(l_mail_conn );
    utl_smtp.quit(l_mail_conn);
    end;
    Can you please let me know if i am wrong in the following one
    1. After running the program, the output saves at ''/u07/applmgr/dev/devcomn/admin/out/DEV_wg-oa-01/RGADWALA.5929617"
    This information i got from fnd_concurrent_request table.
    * Do i need to have Write and Read permissions for the above said path
    2. The above said path I can see in the V$parameter table for column Name = 'utl_file_dir'
    3. I even created an Directory Name as 'OUT_DIR' in all_directories table with same path as above.
    I hope i have cleared your doubts, can you please let me know where exactly i am going wrong in my earlier procedure.
    Regards,
    RR

  • MQAdapters Not able to push or pull message from Bpel

    Hi All,
    Presently i am working on a Bpel Module which is receiving a jms message and has to push them onto an IBM message Queue. Under the flow I am receiving the error as given,please suggest some solution.
    Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding:
    "JCA Binding execute of Reference operation 'Enqueue' failed due to:
    JCA Binding Component connection issue.
    JCA Binding Component is unable to create an outbound JCA (CCI) connection.
    GetApprovedSupplierDetails_IMR:SAPPIMQRequest [ Enqueue_ptt::Enqueue(body) ] :
    The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue:
    BINDING.JCA-00001 java.util.MissingResourceException java.util.MissingResourceException
    java.util.MissingResourceException java.util.MissingResourceException
    Please make sure that the JCA connection factory and any dependent connection factories
    have been configured with a sufficient limit for max connections.
    Please also make sure that the physical connection to the backend EIS is available and the backend itself
    is accepting connections. ". The invoked JCA adapter raised a resource exception.
    Please examine the above error message carefully to determine a resolution

    Thanks for the reply though JMS is not being used out here .
    I am configuring IBM MQ and trying to push messages inside those queues. Both SOA11g and IBM Websphere are installed in my machine and the BPEL 11g just wants to trigger the event to store the message inside the Queue.
    Earlier on i was not able to send across the message to queue and presently i am stuck up with this error.

  • TS2755 I am not able to send pictures to one of my contacts. I can for all others.

    I am not able to send pictures to one of my contacts. I can for all others. Can someone explain why that could be happening?

    Perhaps that recipient does not have MMS texting as part of their cell service.  They may only have SMS texting which does not support pictures.

  • With my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why

    with my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why isn't it possible?? Bad ssoftware while downloading it from internet because I lost CD rom. No pilot available for scanning with it??? Bad version of soft??? I bauught this printer because of his utility and space occupped: able to print, copy and scan in  same machine, gain of room, perfect, but my scanning function is not working!!!! I would like to solve this damned problem which upset me since several weeks.... Waiting for an answer and a solution,  best regards

    pmonteil31 wrote:
    Waiting for an answer and a solution,  best regards
    Hi,
    Sorry you have to wait longer because I can not find your printer model under Google. Must be very old ?
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMe

    Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMessages.

    Kolyei, sorry for the late reply.
    Have your brother create a contact in his phone for himself. Inside his own contact, have him add his phone number and his iCloud address.
    Settings > Messages > Send & Receive Have your brother select both his phone number and email addresses where he would like to receive iMessages.

  • I have a white iPhone 4S. For some reason I cannot MMS only one of my contacts. I'll send a picture or video and it will go through, say delivered underneath the picture, then 30 seconds later it will say not delivered and I have to send it as a text.why!

    I have a white iPhone 4S. For some reason I cannot send media (picture,video,etc.) with one of my contacts. I'll send a picture or video and it will go through, say delivered underneath the picture, then 30 seconds later it will say not delivered and I have to send it as a text message. Why is this happening!? It happens connected to wifi and not connected to wifi.
    I appreciate the help, thank you!

    If it says "Delivered" under it to begin with, then you're not sending it as an MMS, you're sending it as an iMessage. It's entirely possible the problem is on the receiving end.

  • I am not able to send/receive messages from one number intermittently.

    I have a friend, who is also through Verizon, and we are both having issues being able to send/receive text messages to/from each other.  I have no other issues with anyone else, only this one number.  I have checked that both phones are running current updates, I have a Lumia 928, she has an Android phone I'm unfamiliar with.  But we only have the issues with each other.
    Any suggestions, please
    Thanks
    Bob

    No third party apps, no signatures, we've cleared out contacts and are using just the numbers.  She ended up dropping her phone and got a new one.  She has a Galaxy S5, I'm still on my Lumia 928.
    I did a live chat with someone here, based on her suggestions we both power off our phones, remove/replace simm cards, restart phones regularly and this issue is still occurring.
    This issue ONLY happens with her, even when I'm at places that have horrible service, I receive messages/calls from everyone except her after I leave the trouble areas.  My phone tells me she is receiving my messages when she claims she isn't, her phone tells her I am receiving her messages when I am not.

  • TS2755 I am not able to send text messages to one particular person.  Error comes back to enter a valid 10-digit phone number.

    I am not able to send text messages to one particular person.  Error comes back to enter a valid 10-digit phone number or short code.  I have deleted this contact and re-entered numerous times and still get the same error code.  Any ideas?

    Are you entering a 10 digit number? Or, if it is not a North American number or you are not in North America, are you entering "+" followed by the country code and number?

  • My wife and I share the same email address and Apple ID.  We are not able to send and receive Text Messages to one another.

    My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to  send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
    Thanks.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • TS2755 Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

    Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

    Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
    There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

Maybe you are looking for

  • Transacction types not displaying in the popup

    Hi Experts, After system upgrade from crm 7.0 to ehp3, transaction types are not displaying upon clicking New button and create follow up buttons. I have checked the spro settings and compared with 7.0 system. There are no changes. In the debugging i

  • New comer to DVD Studio

    I just recently started messing with DVD studio and have found that the resolution/quality of the images change dramatically when imported in as the background. As a graphic designer, who typically works in print, I'm used to CMYK. I'm sure it has so

  • How to pass checkbox multiple value in URL as parameter?

    Hello, I have a checkbox in two page. The checkbox is based on a LOV and user can check more than one value at a time. The return value of the checkbox is like "ID1:ID2". I want to call another page with the same checkbox item and want to pass the ch

  • Mac os x 10.7.1 trash question

    I'm using OS x 10.7.1. When I drag files to the trash, i get a message that says Finder wants to make changes. Type your password to allow this. how do i get rid of that message/request?

  • How to Transport Personalized mail?

    Hi Gurus How to Transport Personalized mail From Development servers to quality sever and also Production Server Cheers Mahi