Why is outbox not visible WHILE a mail is being sent?

When I am sending mail, the outbox is not visible.
The only time it appears is when there is a problem with the outgoing email and it gets 'stuck' - THEN I have an outbox.
Is there any way I can make the outbox remain visible, in case I have made a mistake, and wish to stop a mail from being sent after I have (accidentally or otherwise) clicked on 'send'?
I have a feeling that when I was running Tiger, the outbox was always visible.
I cannot remember what happened on Leopard. I am now on Snow Leopard.
thanks

Click on Window in the menubar while in Mail, and choose Activity. This will bring up a monitor with a Stop button. Several seconds is not long sometimes. Watch the monitor while trying to send -- take note of the time spent connecting to the server versus the time spent transmitting.
Ernie

Similar Messages

Why cannot I not see my mac mail folders?

Why can I not see my mac mail folders on my iPad?

I also use MobileMe and yes it uses IMAP by default.
Okay, it's simple than. The folders you've created are local folders which are not stored on the server.
In order to change that open Mail.app select Mailbox->New Mailbox and make sure you choose MobileMe at Location.
Now drag&drop your "On my Mac" mails into that new "MobileMe" folder. After a few min. they should be synced.

I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

Why can I not send an e-mail from my contact list?

Why can I not send an e-mail from my contact list?

I responded to your other post.
Have you set up an email account on your iPad? What is happening when you try to send an email?

Why am I not receiving my AOL mail?

Why am I not receiving my AOL mail? I receive it on my phone and on other computers but not my iMac.

Go Mail - Preferences - Accounts and re-input all the settings for it even if they look OK. From time to time a setting can become corrupt, on the surface it looks fine but underneath it's not OK. If you re-input that will remove the old setting and input a new one and this frequently helps.

TS3899 When my ipad is not being used I don't receive my emails until I start using my ipad then all my new emails download.. Why am I not getting my emails as they are sent to me?

I 'm not receiving my emails as they are sent to me. So as soon as I start using my ipad again all my new emails start to download? So why am I not getting emails as they. Are sent to me?

you have your email to set to manual
change the setting in mail/contacs/cal

Why can I not open up photos that are being text to me?

Why can I not open up photos that are being text to me?

Hey Uptogetdown,
Check out the following article:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
It is for troubleshooting issues with the Messages application on iOS devices, so I'd go through the steps listed and see if that resolves the issue.
All the best,
David

When I open my sleeping mac, it makes the noises that indicate mail is being sent. I am not sending mail. Is someone somehow using my mail?

When I open my sleeping mac, it makes the noises that indicate mail is being sent. I am not sending mail. Is someone somehow using my mail?

go to https://appleid.apple.com/ and try to reset it there. when updating to ios 7 it does have activation lock so you have to know the apple id and password. contact apple and they make be able to assist you with apple id password.

Why are my emails not visible in Mac Mail?

I have a MacBook Pro (13-inch, Mid 2012), 2.5 GHz Intel Core i5, 4 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB.
Running 10.10 Yosemite. Have not had trouble until this morning. Was working in mail and suddenly I could no longer see any emails.
I closed out of mail & opened it again, that did not help. Turned off the computer. No luck. It still shows that I have emails and I can even send
& receive emails. I just can not see them.

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Attachments not visible in Yahoo mail under Firefox 18.

Running under Firefox 18, attachments to received e-mails on Yahoo mail are not visible, as they used to be (and are under Internet Explorer). On downloading the e-mails (to Thunderbird) the attachments are there as expected.

hello, in [https://support.mozilla.org/en-US/questions/947471 this thread] a user has found out that the problem might be related to the ghostery addon.
add an exception for yahoo mail: click on the ghostery icon while you're in yahoo's webmail, choose "edit blocking options" & then don't block on this domain...

Email contents not visible using Yahoo mail, Windows 7 pro, FF3.6; email content fine in IE

New laptop with Windows 7 pro; loaded FF....worked fine for a couple weeks....then, contents in email no longer visible-----just blank box where text would normally appear. Only known changes were auto updates to adobe and auto updates to Windows. Zonealarm security in place since beginning, no changes since installation. When using IE, email is visible.
Just uninstalled Firefox and reinstalled. Same result....emails still not visible.
Appreciate any suggestions.....I hate using IE.

When you send mail the field you mention is used to populate the "ReplyTo: fild in the mail header. Otherwise it has no purpose and setting it to nothing will also work.
Yahoo are obviously checking that field as you send mail. that is points to a valid address, and I have a sneaking suspicion that is might be required to point to your yahoo mail account.
Historically the"Nigerian" type scam emails used a replyto address completely different from the one used to send the mail. So even if the sending account was closed down they still got the replies. The mail quite commonly originated in Yahoo and replied to Hotmail accounts. So I guess they have a check to try and discourage that legitimate, but undesirable from their perspective, use.

Why changes are not visible in alternate profit center heirarchy?

Hi
I did changes in the master data of profit center. I chaged the profit center group in the masterdata of profit center & the same change is visible in the standard heirachy but the changes are not visible in the alternative heirarchy.
I think it should visible as I did changes in the master data.
I just want to know why it is like so or there is some other way to change the master data.
I know i can drag the profit center as well in t code KCH9 or KCH 2.
After doing so i activated the same.
Waiting for sugestions, comments.
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 2:03 PM
Edited by: Smruti Mohanty on Nov 13, 2008 3:02 PM

Hi,
If your are using same profit center group(which is used in standard hierarchy) in alternate hierarchy,you will see change.
if your using different groups in Standard hierarchy and Alternate hierarchy you will not see change in alternate hierarchy.
hope this helps you.
Thanks,
Rau

Gmail spam folders not visible in Mavericks mail.app

I have upgraded the operating system to Mavericks on one of the Macs I use. In mail.app, I find that the Spam folder in my gmail accounts is not visible; the same is true of a number of other gmail folders that formerly appeared as subfolders of the main [Gmail] folder. I have found no mail.app preferences that might explain this disappearance. By accessing my gmail accounts via a web browser, I have confirmed that the Spam folders are still present in each.
Thanks in advance to anyone else who reports this issue and all the more so to anyone who can suggest a fix.

You have sub-folders of the Inbox???
I did see a post on Mountain Lion forum where the person had the same setup and got it back. I know I was part of the thread, but I can't find it.
You may need to remove the account and re-add it to Mail.
<Edited By Host>

Somebody help me-Why button is not visible??

button on AircraftCockpitPanel is not visible, plz somebody help me
and if possible help me to make AircraftCockPit Panel transparent
import java.awt.Color;
import java.awt.GraphicsEnvironment;
import java.awt.*;
import javax.swing.*;
import javax.swing.JFrame;
public class RBStrategy implements Runnable
     private JFrame frame;
     static boolean onlyScreen = true;
     static Screen screen;
     static AircraftCockPit aircraftCockPit;
     public RBStrategy(JFrame frame, Screen screen)
          this.frame = frame;
          this.screen = screen;
     public static void main(String[] args)
          JFrame frame = new JFrame();
          screen = new Screen();
          frame.setUndecorated(true);
          frame.getContentPane().add(screen);
          GraphicsEnvironment.getLocalGraphicsEnvironment().
               getDefaultScreenDevice().setFullScreenWindow(frame);
          screen.setLayout(null);
          aircraftCockPit = new AircraftCockPit(screen);
          new RBStrategy(frame, screen).run();
     public void run()
          do
               String output;
               try
                    Thread.sleep(1000);
               catch (InterruptedException ie)
                    ie.printStackTrace(System.err);
          while (true);
class Screen
     extends JPanel
     implements
          Runnable {
               boolean progressing = true;
               Thread t;
               Screen()     {
                    this.add(new JButton("ButtonScreen"));
                    this.setBackground(Color.BLACK);
                    this.start();
             public void stop()     {
                  progressing = false;
                  t.stop();
             public void start()     {
                  progressing = true;
                  t = new Thread(this);
                  t.start();
             protected void paintComponent(Graphics g)     {
                       super.paintComponent(g);
                       g.setColor(Color.red);
                       for(int i=0;i<this.getHeight();i=i+10)     {
                                 g.drawLine(0,i,this.getWidth(),i);
               public void run()     {
                    try     {
                         while(progressing)     {
                              this.repaint();
                              Thread.sleep(1);
                    }catch     (InterruptedException e)     {
                         System.out.println("Interrupted");
class AircraftCockPit
     extends JPanel
     implements Runnable {
          boolean progressing=true;
          Thread t;
          JButton jButton;
          Screen screen;
          AircraftCockPit(Screen s)     {
               screen = s;
               jButton=new JButton("ButtonCockPit");
               jButton.setBounds(30,30,40,40);
               this.setBackground(Color.GRAY);
               this.setBounds(s.getWidth()*3/4,s.getHeight()>>2,s.getWidth()>>2,s.getHeight()*9/20);
               s.add(this);
               this.start();
          public void stop()     {
               progressing = false;
               t.stop();
          public void start()     {
               progressing = true;
               t = new Thread(this);
               t.start();
          protected void paintComponent(Graphics g)     {
                    super.paintComponent(g);
          public void run()     {
               try     {
                    while(progressing)     {
                         this.repaint();
                         Thread.sleep(2);
               }catch     (InterruptedException e)     {
                    System.out.println("Interrupted");
}

Quit multi-posting you are wasting peoples time. I gave you the answer yesterday:
http://forum.java.sun.com/thread.jspa?threadID=5230919&start=4

Profit centre field not visible while using Posting Key 15

Hi,
While using Tcode F-28 and Posting Key 15 profit cente field is not visible. I have checked following configuration. In OBC4 for Reconciliation account - additional account assignment - here the profit centre field is optional. Likewise I have checked OB41 for Posting key 15 - Profit centre field is optional.
Is there any other configuration to be done inorder to make the profit centre field visible.
Many thanks in advance
Regards
Narayanan

Dear,
SAP Standard System cannot provide PRCTR field for the screen for customer/vendor line
item although it is available if the line item is a G/L account. As a
general rule, the system assumes PRCTR to be filled by document split or
by running SAPF180 and AR/AP transfer depending on NewGL PCA or
classic PCA usage.
It was and still is not possible to enter PRCTR on vendor/
customer items.
One of the workarounds using the standard tools is to use field-to-
field substitution. You can enter the profit center in dummy field,
for example XREF1, and substitute the value entered in XREF1 into
PRCTR field.
I hope this can help You.
Mauri

Why is outbox not visible WHILE a mail is being sent?

Similar Messages

Maybe you are looking for