Why is Premier creating 500mb project files that take forever to save
I started a new project with Arri Amira footage, Premier Pro CC 2014 (not latest update) and it created a huge file of just under 500 mb. granted it has about 2000 clips and the LUT is being added automatically, and the footage is 4k 4444, but still i dont think the project should be so big, no?
I started a new project with Arri Amira footage, Premier Pro CC 2014 (not latest update) and it created a huge file of just under 500 mb. granted it has about 2000 clips and the LUT is being added automatically, and the footage is 4k 4444, but still i dont think the project should be so big, no?
Similar Messages
-
Why can't I open a FCE project file that I have saved? (It now says ZERO kb
Hello...
I have just started working on a project in Final Cut Express - I render, save, and close out of FCE - but, when I go back to FCE, the project I was working on does not open.
Why can't I open a project file that I have saved?
Here was my process in a nutshell:
~ When I opened FCE, I went the System Preferences and set the Scratch Disks to a folder on my external hard drive.
~Then, I went to File - New Project - worked on the project for a while (including creating bins, importing images and video, and creating a sequence.
~I saved the project file to the same folder that I set my Scratch Disks to.
as often throughout this process.)
~When I was done, I saved again andd closed FCE.
~Then, soon after, I opened FCE again and my project did not open automatically.
~So, I clicked File - Open Recent - browsed to and chose the project file name and FCE gave me a "Unable to open file" message.
~When I check to see if the project file actually saved to my external hard drive, the name appears, but it says the file size is ZERO kb.
I have done this twice with the same unfortunate result. What am I doing wrong? I have worked on FCE on this same computer before, setting the Scratch Disks the same way, and I did not have this problem.
Please help. Thank you so much for your feedback.
...RaeAre you sure you are trying to open the project file you actually saved ?
Try using Spotlight to search for your project file name. I might be wrong, but I guess you try to open an empty copy while your real project file (what you saved) is somewhere else in either your startup disk (Documents folder ?) or the external drive. If so do not use Open Recent in FCE but simply double click the "real" project file.
Piero -
Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
SanderHi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Premier Pro CS6 project files (in the 6.0 folder) aren't there after upgrade to CC
I've recently upgraded from CS6 to CC and my premier pro project files form the CS6 version aren't in the Adibe folder. I'm hoping these were backed up to a hidden folder or something, or there is a way to get them back. I've still got the media (videos and audio etc). It's the project file that I cant find. Any help?
For product specific questions you may do better in the specific product forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right to open the drop down list and scroll
Direct to http://forums.adobe.com/community/premiere?view=discussions
When you get there, LOTS more information you need to provide
-PPro Information FAQ http://forums.adobe.com/message/4200840 -
How do I create a .llb file that holds all the subVIs used in a VI?
Hi
I wish to create a .llb file that holds all the subVIs(~200) used in my main VI.
When I open my main VI, and look into the 'show VI hierarchy' I see a lot of subVIs, so to copy all these subVIs into the library file is going to be really time consuming. I am hoping there is an option in Labview by which I could automatically put all these subVIs into one library file?
Thank you
Gautham Radhakrishnan
Dept. Of Physics
University of TorontoIn your toplevel VI, go to "File..save with options".
Now select "Development distribution", press save, and give it a name for the llb.
LabVIEW Champion . Do more with less code and in less time . -
Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".
Anyone know how to fix this?
Please help. I can't get it to work. I've tried uninstalling and it says the same thing. Is there anyway anyone can help me?HELP!!!! PLEASE!!!!!
-
How do I create a pdf file that is 300 dpi in Adobe Acrobat XI?
How do I create a pdf file that is 300 dpi in Adobe Acrobat XI?
PDF files do not have a "resolution" - they aren't images. The pages are a mix of vector art and text, and raster (pixel-based) graphics. The raster items on a page can (and often do) have different resolutions.
-
How do I create a .llb file that includes only the subVIs used in a VI?
hi....
can anybody help me ...i wanna creat a library file that holds only the sub-VIs that are running in particular main VI .
are there options for that in labview??I don't think understand the answer. From just the top level VI, do like I said and an llb will be created with the top level and all subVIs. You can also edit the llb (Tools>Edit VI Library) and make your main VI top level. A note of caution. An llb was originally designed as a means of storing VIs with extended names. With modern OS's allowing long file names, an llb is less useful except as a convenient means of distributing a group of VIs from one location to another. This would be done as a final distribution such as an instrument driver or to another developer who would then convert the llb to a folder. There are several problems with keeping the development VIs in an llb. One is that it doesn't work with any form of source code cont
rol. Another is that a corrupt VI in an llb can and has made the entire llb unreadable so unless you are absolutely religous about backups, you made find yourself in deep trouble some day. -
Revision: 10191
Author: [email protected]
Date: 2009-09-11 17:17:37 -0700 (Fri, 11 Sep 2009)
Log Message:
Reverting project files that got accidentally checked in
Modified Paths:
flex/sdk/trunk/development/eclipse/flex/airframework/.project
flex/sdk/trunk/development/eclipse/flex/spark/.actionScriptProperties
flex/sdk/trunk/development/eclipse/flex/spark/.flexLibProperties
flex/sdk/trunk/development/eclipse/flex/spark/.project
flex/sdk/trunk/development/eclipse/flex/spark/.settings/org.eclipse.core.resources.prefsThats good news.
-
I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings which appear to be correct. Although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.
When bouncing, do you use the Key Command or the button on the Output Channel Strip? The Key Command only bounces from the Stereo Output. The bounce button bounces from the Channel Strip it is on. So if you want to bounce out outputs 3-4 or higher, don't use the key command, but the button.
The strange thing here is that Logic, when it bounces an MP3, first bounces an AIFF, which at the end of the bounce process is being converted to MP3, so I can't imagine how you can get a silent AIFF and a normal MP3.
How have you listened to those bounces? iTunes? Quicklook? Quicktime? -
How do I create a pdf file that is only part of an existing pdf file??
How do I create a pdf file that is only part of an existing pdf file??
Use Adobe Acrobat. ExportPDF does not do this, or claim to do this.
-
I've created a script to copy large files from one system to another system. Unfortunately the transaction language of that system isn't feature rich, so I can't code a loop to copy multiple files to move concurrently. My goal is to create a batch file that
will do the loop of copying multiple files, after being called by the application that is copying the large files one at a time. Can I get some pointer on how to do this? Basically, the code is like this:
Copy from \\Server_1\directory\sent_file.xyz
To \\Server_2\Directory\received_file.abc
So the purpose is to perform the successful copy, then if the copy is good, execute the loop until completed.Might look around here.
http://gallery.technet.microsoft.com/scriptcenter/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=storage&f%5B0%5D.Text=Storage
Or ask over here.
MSDN Scripting forum
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi 244 KBI didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me. -
Revision: 11242
Author: [email protected]
Date: 2009-10-28 13:26:52 -0700 (Wed, 28 Oct 2009)
Log Message:
Updating the Flex project file to take into account the NetStreamContentProtectableTrait's name change.
Modified Paths:
osmf/trunk/framework/MediaFramework/.actionScriptProperties
osmf/trunk/framework/MediaFramework/.flexLibProperties
Hi,
This topic seems to be related to VBA coding, better to post your question to the forum for Excel Developer
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Tony Chen
TechNet Community Support -
recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?
johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/
Maybe you are looking for
-
Problem in creating a row in backing bean for a view object..
hi, i've created a view object and am trying to create multiple rows in my backing bean. but am not able to do that one. my 1st row is getting inserted and all the other values am not able to do. can anyone reply to this as soon as possible. Thanks i
-
In the last few days, I've encountered a problem with scrolling with my up & down keys. The up & down keys seem to, now function as Home & End keys. MyPage Up & Page Down keys seem to do nothing. What is wrong?
-
Why doesn't "include/object/text from file" work?
I want to include (link) text from other Word documents to a main Word document and I use "include/object/text from file" (Word function) It works fine when I do so in "H:", but doing exactly the same in the Sharepoint environement result in "nothi
-
How to find lsit of Infoobjects per query in a table
Hi All, is there a way to find list of all the info Objects per query in a table. i know there are tables like RSZELTXREF and rszcompdir and rsrrepdir I am not able to make out the relation between them. All I want is to know what are the characteri
-
Availability of software in OTN and SAC
Folks, Thanks for setting up a separate thread for feedback and suggestions... I was wondering how we can address the problem of software being replaced too quickly in OTN/SAC by the latest version. We run into this issue very often. By the time deve