Why is Premiere getting an error when trying to export .MXF files?

Hello!
I have a video that I need to submit to DMDS and it must be a .mxf file. This is the first time I've ever had to export a .mxf so I am not too familiar with the type. I have been exporting every other type of file for years and never had an issue (H.264, quicktime, etc.). However, when I try exporting .mxf I get the generic rendering error which then stops the export.
The first time I tried, the video was down to 12 minutes left (after about 2 and a half hours) when I got the error.
The next time, it crashed right away with over 2 hours still remaining.
So it does not seem to be a corrupt clip because: A) I've been rendering this video out as other file types for rough previews, drafts, etc and it's worked fine and B) The 2 crash times were on opposite ends of the spectrum.
I am running an iMac with OSX 10.7.5, 3.06 Ghz Intel Core 2 Duo with 8GB ram...I am using Premiere Pro Version 6.0.0
I do have Third Party plug ins installed but have never had an issue exporting in the past, only with this .mxf file.
Thanks in advance for any and all help!

If you have GPU accelertation enabled in Premiere Pro, try switching to Software Only.
Are you queuing the job to AME or clicking "Export" in the Export Settings dialog (which encodes directly through Premiere)? Whichever path you're going down, try the other one.
I'd also keep an eye on your resource usage, especially RAM, while encoding in progress. With 8GB of RAM, I'd be surprised if that were the problem.
Lastly, if you're encoding through AME, then you might want to post on that product's forum: http://forums.adobe.com/community/ame

Similar Messages

  • Why am I getting an error when trying to export a jpeg at 300 dpi?

    I am trying to export a 18" x 24" illustrator file to a jpg at RGB 72dpi and CMYK 300 dpi.  72, no problem but when I try to export at 300 I get an error message. Any ideas why this is happening?

    Not so much a RAM problem as it may be a scratch disk problem.  Illustrator may be looking for 1.) a place to put the file, and 2.) enough scratch space to accomplish the op.  Try opening the .ai file using Photoshop using the size 18 x 24 @ 300 ppi in the Open dialog.  That will rasterize the file ( not sure why you'd want to ).

  • Why do I get an error when trying to export a large PDF to Excel?

    The ExportPDF process is only returning a simple message.
    The file has not been processed.
    An error has occurred which stopped the processing of the PDF.

    Hi gymwalker29,
    There is a 100 MB file size limitation for submitting files to the Export PDF service
    As for the quality of the conversion,from our FAQ entitled Will Adobe ExportPDF convert both text and formatting information?
    Acrobat can convert large files.
    You can use free trial service of Acrobat for 30 days:Download Adobe Acrobat free trial | Acrobat XI Professional
    Regards,
    Florence

  • Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

  • Why am i getting an error when trying to download ios6

    Why am i getting an error when trying ios6

    I have no idea. Don't think anybody else will be able to figure it out either from the information you have provided.
    Might help if we knew the error message and/or number. It is a start anyway.

  • Why am I getting an error when I place two OAM files one after the other in different pages?

    Why am I getting an error when I place two OAM files one after the other in different pages? They do not load or play correctly.  They are both configured to play automatically with a .125 second delay and both have a white rectangle "poster" over for a hidden effect.

    Thanks for the idea, Scott! I initially tried your idea, but my OAM files were still not loading correctly.  I tried other combinations of OAM files, and it seems to work fine.
    Back to my original OAM files: I made sure that my elements in my Edge Animate project had different names. I originally copied parts of some elements from one to another, and I think it was confusing to DPS to read it. 

  • Can anyone tell me why I'm getting this error when trying to make visibility variables

    I have set these up in previous versions of Illustrator. CS and illustrator 10 worked just fine with Variables. Now I can't seem to switch between data sets. I just keep getting this error when I try to switch from one data set to another.

    I'll start with the permissions and see if it changes the behavior.

  • I get an error when trying to import MP3 files in iTunes?

    When I try to import mp3 files into iTunes (version 6), I get an error message of:
    The file "song file name" can not be imported An unknown error has occurred (-50).
    I have already imported these files into iTnes on my old computer, but run into this problem with my new laptop. I downloaded a new version of iTunes just like I installed all my new programs on this new laptop.
    For some reason, I run into this problem when trying to import any mp3 files (as mentioned, even mp3 files that I successfully imported into iTunes previously).
    (I've tried a complete removal and re-install, but that didn't help)
    Anyone know why I'm getting this error message and how to correct things?
    Thanks in advance for any help !!!

    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\iTunes.exe.mdmp
    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\appcompat.txt
    those are the files that are sent as an error report... i dont know what the problem is! this is starting to get me mad! I need my music! some1 help plz.
    I cant load that one folder, what could be the problem? I've loaded another folder similar to this one but it was alot smaller and everything worked out fine, but for my big one its messing up.

  • Why do I get an error when trying to send email?

    When I try to email a photo directly from iPhoto, I get an error message that tells me that server is unable to identify email name and password. WHY?
    I verified and email address and password are correct>
    Also, I have listed to email addresses on my MAC a Gmail address and a Comcast (other) account, but when I click on stamp for email on my desktop it opens both mailboxes in one place. Is there a way to separate them.
    Any answer and help provided will be greatly appreciarted.

    Have you ever tried to access email via your iPhone in the past with this service? Has it ever worked? I'm looking at their support page and cannot find any information regarding access via a mobile device. I'm wondering since it is a satellite service that you cannot access their domain from cellular service. I'm not positive, but a search of their support page is not yielding much information.
    Also, the incoming server is not your problem. It is the outgoing server or SMTP. According to the settings, it should be smtp.everyone.net. It does not use SSL for the outgoing server, and the username is your entire email address and then your password.
    You should be able to use the information for the Mac mail that I found in this link. http://www.skybeam.com/support/helpful-guides/email-support/mac-mail/ If that doesn't work, I would call their support phone number and ask about using their mail on a mobile device.

  • Why do I get an error when trying to verify my ipod for ios 5 update?

    Hey guys, I am having a problem with my ipod and upgrading to ios 5. I am able to safely get passed the backup stage and also the extraction stage, however, when it begins to verify my ipod for the restore it says, "your device is not eligible for the request build at this time." I don't know why this is happening. I have tried resetting and restarting my ipod and i have also restarted my computer. What is wrong?

    Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Mylenium

  • Why do I get an error when trying to use a link in the forum?

    I just tried to use the link that Varad offered in Redirect certain users with login procedure and I got an error:
    The specified thread [0] was not found.
    I got the same thing when trying to use a similar link a couple of days ago. They sound like something I might benefit from, but I can' get to them.
    The link URL looks like Re: logon username determines page that opens, how can I accomplish this?
    Any ideas?
    Thanks,
    Gregory
    P.S. I'm using Firefox 3.0.4

    Tony,
    That's what I thought, but apparently it worked for Stefan. If you go to Stefan's post (first link above) do you also see the same link as I have attempted to copy? In Stefan's post, do you see the question mark in a diamond?
    Thanks,
    Gregory

  • Why do I get "unknown error" when trying to download apps with my iPhone when I put the correct password in?

    I keep getting "unknown error" message come up when I try to get an app. I have put my password in correctly but I then get a message saying I've put my password in incorrectly too many times. So I change my password but I still get the "unknown error" message. I have changed my password 4 times now and nothing is working

    I received this email from Apple and this corrected the problem for me...  I only had to reset the iTunes cache
    1) Open iTunes
    2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
    3) In the Preferences menu, click the Advanced tab
    4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

  • Why do I get an error when trying to install PS cs5 on my macbook pro? Error code 6

    i am trying to reinstall PS cs5 on my laptop and I get the error code: 6. Here is the entire message alert.
    Please uninstall and reinstall the product.
    If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
    Error: 6

    Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Mylenium

  • Why am i getting an error when trying to upgrade from 10.7.5 to 10.9

    when i try and upgrade from 10.7.5 osx lion to 10.9 i get an error, i have 2GB of memory and 144MB of storage. can someone help?

    This would indicate that your MacBook Air does not meet the requirements for Mavericks.
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space

  • Why am I getting this error when trying to do Image Processor?

    Ok I am using Bridge & Image Processor to add a water mark to multiple photos at a time with my ready made action.  But for some reason I seem to be getting this error message every few pictures?
    I've never had problems with other photo sets doing this before, but it was just recently that it started.
    But it will successfully add the water mark to some of them via the Image Processor

    Actually, my DVD multi-drives are I:\ and J:\, as my C:\ thru H:\ drives are my individual internal HDD's. Even on my laptop, my multi-drive is F:\. I always list my internals in order, and my multi-drives afterwards. In my case, it's simple layout for simple minds. I am also keen on having my internals listed at the hardware level as 0 = C:\, 1 = D:\, 2 = E:\, 3 = F:\ and so on. Once let a builder deviate from this order and it bit me big time - never again!
    Now, you are possibly correct that the D:\ might be the OP's D:\ is the multi-drive, and now some source disc is not in it. To keep this sort of thing from happening, I ALWAYS Copy my Assets to an internal from my externals (usually), my NAS, and from any archive discs. Importing/Opening from a DVD/CD is often asking for trouble.
    Good luck to the OP,
    Hunt

Maybe you are looking for

  • How to open sharepoint files in edit mode using associated link?

    Hi All, We are trying to use the URL links available through SSM to open documents we hold on SharePoint. These will be the action plans for the risks we are entering as KPIs. The aim is to established a one-to-one link between the risk KPI and the r

  • Sending an Excel Attachment in E-mail, where linesize 255 characters

    Hi, I have a requirement where I need to send an Excel attachment of around 150 columns and the line-size is around 2000 characters. I was planning to use SO_DOCUMENT_SEND_API1. But, it appears that because of the restriction of 255 characters as SOL

  • Service activity creation in SAP from MSP (Microsoft Project)

    Dear All, As we are planning to integrate  SAP & MSP, I have one query regarding service activity creation in SAP from MSP. In case of service activity in SAP we have to assign respective services also otherwise it does not get saved.So when we trans

  • Cross Cell Analysis

    Hi folks, I have 3 different loan types, Loan_type No(Customers) A 20000 B 30000 C 40000 No I want to analyze such a way dt A B C A 12000 25000 B 12000 35000 C 25000 35000 Note : abow sum is not exact where AxB says Number of people who have taken bo

  • Using Measurement Studio with Silverlight

    Hi, Does the newest Measurement Studio support usage in a Silverlight project? It does not in my version (2009).