Why is PS 6 showing hourglass/egg timer rather than thumbnails in the organizer?

I have uploaded some pictures using Photoshop Elements 6 and they usually show up as thumbnails. They are showing as an hourglass/egg timer instead. All previously uploaded pictures are still showing as thumbnails. How do I correct this problem? BTW - in the lower left hand corner of the organizer - it does not say "generating" thumbnails. I have also tried right clicking the thumbnail, then update thumbnail, but this does not work. I can, however, view the pictures is full screen mode.

See this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Recreate_Organizer_thumbna ils

Similar Messages

How can I get two cameras to aquire at the same time rather than one after the other

I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
Deater

Hi Deater,
Thank you for your post. Triggering from two cameras at the same time may be a little trickey, but it can be done. There are multiple ways to tackle this problem. If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW. You should also be able to use the triggering line on each board.
One of the best methods for triggering multiple boards is called GenLocking. The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a387b5c0ac6f6f4e86256c87005fcddf.
The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV. I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230&message.id=2691&requireLogin=False
Hope this helps!
Thanks,
Scott Savage
National Instruments
Applications Engineering
www.ni.com/support

How do you show multiple products horizontally rather than vertically with the module_productfeaturelist?

I am trying to have 3 to 4 featured products that share the same tag next to each other rather than stacked. Is there a way to do this by customizing the "List of Products by Tag" or is there another module I should be using?
What i am currently getting is this and I would like the side by side instead:
{module_productfeaturelist,featured,3,Weight,,true}

Your monitor would need an HDMI connection to hook it to AppleTV. AppleTV would need to be on the same network as the IMac, presumably wireless if you don't want to run cables.
You would then need to use Airplay Mirroring, and that requires reasonably modern Macs, see:
About AirPlay Mirroring in OS X
I don't know for certain but if you set up an automatic powerpoint slideshow you could probably export to an AppleTV compatible movie files, and then play that to AppleTV via iTunes as well, which ought to work with older Macs but video might need to be set to loop or repeat itself a lot.
If you want to use Airplay Mirroring buthave an old Mac, then AirParrot software has a demo, and some people find this ok.

Is there a way to have numbers in a row show below your slideshow rather than thumbnail images?

I'd like to have just a row of numbers for the viewer to tick through, rather than thumbnail images, to save space around my slideshow...have checked the counter but that must not have been the thing

Hello,
Slideshow thubnails won't accept anything else apart from images. Slideshows only accept images. Use compositions if you wish to insert text etc.
Cheers
Parikshit

Thumbnails show hourglass icons. How can I get the pictures back?

I have photoshop 11. I'm running Windows 7. Most (80%) of my thumbnails in the organizer have been replaced with hourglass icons. How do I get my thumbnail pictures back and why did this happen?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why is 8gb only showing total memory of less than 6.5?

why is 8gb only showing total memory of less than 6.5?

Because the difference is due to the operating system taking up most of the diference and the other is how GB is advertised and actually used.
http://en.wikipedia.org/wiki/Gigabyte

In iTunes, is there any way to play one song at at time and have the song stop at its end. I want to play guitar with a track and have that track stop playing rather than going to the next song.

I want to play a single song in iTunes on my ipad and have the track stop when the song finishes, rather than itunes playing the next track. I play guitar with the track and need iTunes to stop at the end of the song.
I have worked around this issue by creating a separate play list for each song, then inserting the song into the play list. I would like to find a more straight forward solution that would eliminate this extra step. On my PC, I use QuickTime to bring up an individual song and then can play one track at a time.
Thanks!

On the IPod if the shuffle icon is colored blue it is ON, if it is colored white it is OFF. This control is global, if it is ON any album or list will be shuffled.

How do I delete multiple emails at the same time rather than individually?

How do I delete multiple emails at the same time rather than individually?

My mistake
I was looking at my KB, even tested my suggestion with the command key, and then wrote option
Barry

How do I get all my pins (bookmarks) to show up on maps rather than choosing one from the bookmark list?

How do I get all my pins (bookmarks) to show up on maps rather than having to choose from the bookmark list? I can see my list getting very large and more cumbersome to search. In google maps, all my starred locations show up on my map.

Have you let Apple know you would like to see this feature? They do not participate in the forum, and their only source of user feedback is the feedback page. To let them know you would like to see a feature, go to the feedback page at www.apple.com/feedback and select the appropriate link.

Downloading from itunes store, one at a time rather than in bulk

Ok, I was wondering if it was possible to change the amount of downloads that happen at one time. I am on a satellite dish and it works better if I download one at a time rather than in a bunch. Does anyone know if its possible to change that setting? I have looked everywhere and can't find anything.
Thanks so much!!
belizegal

Ok, I figured out how to get this to work. If you pause all of them then just restart one it does it.
Just so anyone else was wondering.

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

How can I use the database default time rather than Java supplied time

I've searched over and over and nobody seems to have this issue so maybe its just me!
When inserting a record I would like the a create_date column to automatically use the database time rather than a supplied time via JPA. That was all times a relative to the database which makes sense.
The trouble is I cant figure out how to do this in a sensible manor.
If I specify an column like :
     @Temporal(TemporalType.TIMESTAMP)
     @Column(name = "CREATE_DATE")
     private Date createDate;
and IDL
CREATE_DATE TIMESTAMP WITH TIME ZONE DEFAULT CURRENT_DATE NOT NULL
If I leave createDate null I get an exception. If modify the column to allow Nullable then column is set as Null.
If I leave the column out of the entity bean and then and create a row then the database current time is inserted. The trouble then is that if I want to read the date I'm going to have to create a copy of the bean but with the CREATE_DATE in it, and this doesn't make sense.

I should also mention that TopLink has always supported the ability to retrieve the current time from the database for use in optimistic locking. The TimestampLockingPolicy offers the ability to configure the next value being retrieved from the database instead of using the local time from the JVM. Our extended optimistic locking configuration does not currently support setting this option but it could be done using a descriptor customizer which can be configured in your persistence unit properties.
Using optimistic locking may be a good solution for the last modified date since it will also ensure that you do not corrupt the database if someone else has incremented this value since your last read.
Doug

I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

Hi mjsa1,
Please see Error "The Organizer Database is damaged and will be reset..." | Acrobat 9.
If you're still having trouble, please let us know!
Best,
Sara

Why are my messages being sent through email rather than iMessage?

Why are my messages being sent as email rather than iMessage?

Not being sent as email - shown as being sent from an email address because you have selected to start new iMessage conversations from your Apple ID email address on your iPhone.
When registering an iPhone with iMessage, the phone number along with your Apple ID email address is registered with it.
Go to Settings > Messages > Send & Receive > Start New Conversations From - select your iPhone's phone number.

Why do episodes of a TV show season appear separately rather than grouped together?

I have a 64GB iPad3 and downloaded the first season of Avatar: the Last Airbender from the iTunes store app on the iPad. After downloading, I went to the video app and saw that each episode was listed by itself rather than grouped together as a season.
Is there a way to fix this? It is very frustrating because I like the feature of the video app that lets you watch episodes one right after the other.
Thanks in advance!

The same thing happens on the iPhone. Apple changed this close to two years ago and I too don't like it. I have 160 music videos, Apple used to goup them by band if there were more than three videos by that band but now they are all listed individually like TV shows do.

Why is PS 6 showing hourglass/egg timer rather than thumbnails in the organizer?

Similar Messages

Maybe you are looking for