Why is Refresh Sheet not showing me the parameters for report?

I have a really large amount of data showing up in my report. It is taking forever (times out after 30 minutes) for my data to display. In the past, I have cancelled and then used the refresh sheet to constrict my report parameters and then rerun the report. However, today, after I select cancel, and then Refresh Sheet, the report just kicks off again and times out again without showing me my parameter list and without allowing me to specify my running parameters?
Why is this happening and how can I get my Refresh Sheet to allow me to specify values for my execution parameters.
Thanks,
Cherie Machler

Hi Cherie,
Is this problem happening in Viewer?
If yes, I had a SR open with oracle for this problem. It was recently closed without resolution. It is a problem that they are not willing to fix. My scenario is that I open a report with multiple worksheets that are long running and with multiple input parameters. I run the report with the default parameters. Realize I didn't input the correct thing, so I cancel the report. If I cancel at 3 seconds or less, my session hangs and I have to start a new internet session. If I cancel beyond 13 seconds, the cancel takes me back to the select worksheets screen but only allows me to run the report - no changing of parameters allowed.
Message I received from Oracle:
"I have received a response on Bug 5576575 - CANNOT CHANGE THE PARAMETER VALUES AFTER CANCELLING A
REPORT IN VIEWER and internal enhancement request Bug 6007588 - NEED TO CHANGE THE PARAMETER
VALUES AFTER CANCELLING A REPORT IN VIEWER.
The bug applies to 10.1.2.54.25 also. Regarding allowing the parameters to be changed bug 6007588 the
response " in order to fix this,it would need a change in architecture on how we capture and save state
information. This is unlikely ".
It will not be possible at this time to change the parameters when cancelling a query in Viewer."
NOTE: If you read the bugs, they were logged against versions prior to 10.1.2.54 which means they should also apply to 10.1.2.50.
Regards,
Nancy

Similar Messages

HT1386 why my contacts does not show all the numbers for a contact

i want to synch my contacts from Outlook to my Iphone4s but only some of the numbers gets synched please help

Thanks for your reply. I have only had my new Macbook for a few weeks and do not have DropBox or GoogleDrive (or anything else) on it. It is a very weird problem.

Why this tree can not show on the Applet?

hi, all, I try to create a java Applet show a tree, this following code has no error, but the tree can not show on the Applet, can any one tell me why? thanks!
<code>
import java.awt.*;
import java.applet.Applet;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.dnd.*;
public class AppletApp extends Applet {
     Date myDate;
     protected JTree m_tree = null;
     protected DefaultTreeModel m_model = null;
     protected JTextField m_display;
     public void init() {
     public void paint(Graphics g) {
          DefaultMutableTreeNode root = new DefaultMutableTreeNode("root");
          DefaultMutableTreeNode node1 = new DefaultMutableTreeNode("node1");
          root.add(node1);
          node1.add(new DefaultMutableTreeNode("sub1_1"));
          node1.add(new DefaultMutableTreeNode("sub1_2"));
     public static void main(String arg[]) {
          JFrame myFrame = new JFrame();
          Container contentPane = myFrame.getContentPane();
          contentPane.setLayout(new GridLayout(1,2));
          AppletApp app = new AppletApp();
          contentPane.add(new JScrollPane(app), BorderLayout.CENTER);
          myFrame.addWindowListener (new WindowAdapter() {
               public void windowClosing(WindowEvent e) {
                    System.exit(0);
          app.init();
          app.start();
          myFrame.setSize (400,400);
          myFrame.setVisible(true);
</code>

Not quite sure what you are trying to do, but if you move the code from the paint() method into the init() method (then delete your paint() method), then add one new line to the init() method (after the code you just inserted) that reads:
getContentPane().add(new JTree(root));
- You should at least see a tree!

Why an email address not show in the Bcc field in Send Items folder?

Hi,
My user use Office 2007 and Exchange 2008. She sent an email which Bcced to 4 people for example A, B, C and D. However when she opens this email in her Send Items folder within Outlook, it only shows A, B and C in the Bcc field, but if she opens this email
in OWA, she can see 4 people in the Bcc field. It is the exact the same email. Outlook is in online mode (not cashed mode). I don't understand what could be the problem. Why D isn't shown in the Bcc field within Outlook?
Please advise!
Thanks in advance!
Grace

Hi,
Since it's a Client-only issue, we can try starting Outlook in Safe Mode to determine if it's 3rd-party add-ins related:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
I suppose the recipient D is not listed in the mail Filter lists?
http://office.microsoft.com/en-001/outlook-help/add-names-to-the-junk-e-mail-filter-lists-HA001230163.aspx
You can also test if this problem exists when you switch to Exchange Cached mode.
Regards,
Melon Chen
TechNet Community Support

Why does Premiere Pro not show in the Creative Cloud

I just bought the montly membership, paid, got the confirmation, but still Premiere Pro does not show in my Creative Cloud options - under audio/video it only shows and Photoshop, Prelude and Audition.
When I use the link in the email confirmation that I received I can press 'getting started'.
This leads me to the online Creative Cload Download - when I scroll to Premiere Pro, click on download I go to the next page, but still the program does not show?
What should I do differently? I am logged in already.
Please help me!

Do you have a 64-bit machine? Normally the listing will only include programs that your machine is capable of running. Check your machine capabilities against the requirements for Premiere Pro and see if it comes up short.
http://www.adobe.com/products/premiere/tech-specs.html

Why do some images not show on the mobile browser but do on the normal Firefox

I have an HTC desire hd. I have had a site built.
the images don't show on the mobile browser. when using the standard browser which came with the phone 'internet' it works fine. is there a reason for this?

I get a content encoding error when trying to load one of the problem images.
http://www.signapedia.com/gethumb.php?path=userfiles/31_prodimg_55856_img04.jpg&size=85
Why this happens will take some additional research.

Why do my mails not show in the inbox?

All e-mails used to show on the first page of the inbox, and I could browse downwards to see which ones I wanted to read. Now, suddenly I have to doubleclick. This is irritating - I´ve tried to look it up in preferences, but cannot find any solution. Please help!

Could it be that you now have only a single window, instead of a slpit window view? If that's the case, doubleclick on the dimple in the middle of the splitter bar at the bottom of your Mail window.
-mj
[email protected]

3.6.13 firefox;why does my website not show in the way it should; the ISP say that all the pics turn up on their screen but my firefox screen shows a big difference; |I tried emptying cache and re=opening;HELP tomdavies ;

AS A NON=GEEK;
My ISp tells me that images on my website appear to be ok but on my firefox browsre they don't appear;
They told me to contact you==mention of security issues;; (I know nothing) Can you help?
tomdavies

See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see all exceptions in Firefox > Preferences > Content: Load Images > Exceptions
* You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.

Album Cover/Title not showing in the List for an Artist with one album.

Hello all.
I have browsed a number of the posts, but nothing close to my particular problem.
I am new to iPod Classic (a couple of months). I like it! Used to be a Creative Zen Vision:M user.
Here is my issue.
I have most of the covers for my albums. Still looking for a few.
When I go to the Artist's menu and pick an artist, if it has more than one album, it shows 'All Songs' and a list of albums with covers, album name and number of songs on a separate screen. You click an album and it shows the tracks, you click a track and away you go. That works just fine.
However, when the Artist only has one album, it does not show the album cover, name and number of songs on a separate screen. It just shows the list of tracks. I would like it to be consistent. I would like to see the album cover/name before I click the tracks to start.
I have worked all my songs in iTunes. I'm pretty sure there is no difference between the one and multiple album artists.
Of course when you click a track to start, the album cover shows on the Now Playing screen.
Is there some sort of setting I might have missed.
Any thoughts on this? What might I try?
Thanks in Advance ...
Bob

Wow!
Is that really so?
I'm not questioning your answer. Just want to make sure before I say OK and let it be. I had heard that iTunes/iPod forces you to do things their way, this is an example, I guess!
Thanks for the input.
I guess I'll just have to leave it be!
Is iTunes the only way to deal with iPod? Are there any other programs?
Bob

Planned depreciation not showing in the AW01n for current FY

Hi Experts,
I have an issue on Planned Depreciation and the issue as below.
I have created an Asset with Dep.start date is 10.05.2011 and my Fiscal year is Jan- Dec with 445 posting periods. I have posted Acquisition with the value of 10,000 through F-90. When i check the Asset Explorer through AW01n its not showing Planned deprecation in the Posted Values tab and in Comparisons tab its showing the Dep. from 2012 onwards till useful life and here in 2012 its showing the dep.value from May to Dec only, and also its not showing Dep.value for 2011 year ( showing blank).
If i post the acquistion in 2010, its showing the depreciation from 2011 onwards and also for 2010 year its not showing any planned deprecation.
In Dep. calculation it means % of dep. and every thing is ok. ( its showing the values as per the % stated in dep.key)
I have posted the same scenario to another company code and its showing planned deprecation for 2011 year.
May i know the missed config settings to view planned depreciation.
kindly provide your valuable solution
thanks,
jagadish.P

Hi,
When i click the Dep. calculation its showing as below
Type     To Period         Period Factor     Percentage     Curr.APC
N                 164             0.45055                     0                 0
N                 364             0.54945                 0.125               45,000
thanks & regards,
Gopi.P

In J2I9 , cenvat not showing in the Abstract for capital Goods

Hi
In the T-code J2I9, System not showing the BED values in Abstract report for Capital goods.
Edcess and HScess are displayed.
excise invoice,RG23 part no. is generated & also values were available in table J_1Ipart2
please reply

Hi
The BED capital Goods is posted and it is there in the Table also,Ecess and Hsces are displayed .
In the Annexure option of the J2I9, the BED amount along with Ecess and HScess are displayed,
but when we select the Abstract option of J2I9, The BED amount is not displayed,only other two
Ecess and HScess are displayed.
please reply

HT5312 Why does my device not show me the option to reset my security questions

My I pod 5 will not let me purchase anything without my security questions but I forgot them. When looking to restore them I was not given the option to reset my questions. What do I do???....

1. Because you haven't previously set up a rescue email address. Doing so now requires correctly answering two of the questions.
2. Go back to the article you asked this question from and use the link to contact the iTunes Store staff in the 'Additional Information' section. If you don't already have a valid rescue email address, you can't reset the questions yourself, and nobody on these boards can reset them for you.
(93984)

SSRS Matrix not showing all the entry for a Column Groups

I created a Matrix in my SSRS report and for some reason if the COLUMN GROUP has more than one
entry it only shows the first one and not the second or consequent entries.
I opened a question in SO and here is the link:
http://stackoverflow.com/questions/23248421/how-to-add-column-in-a-ssrs-table-based-on-criteria
All help is appreciated.

Hi SiKni8,
According to your description, you have a matrix report. If a user has more than one start date and end date, you want to put all those start dates and end dates into one single row for this user. Right?
In Reporting Service, for all data fields textbox appearing at intersection of rows and columns, the matrix will use Sum aggregation function by default. If the data can’t be calculated by aggregation function, it will return the first one of records. This
is the reason why you only get the first start date and end date for each user. In your scenario, it is impossible to append more columns at the end of the matrix without setting column group. And we can never append columns dynamically based on the numbers
of the records. So for your requirement, we find a workaround which we think is the most related to the answer you want. We use custom code to get both StartDate and EndDate, then return them as string. After that we append those strings and put the whole
string into a cell. Your case has been tested in our local environment. Here are steps and screenshots for your reference:
Put the custom code below into your report:
Dim Num As String = ""
Dim tempstr As String = ""
Function AggregateString(Title as String, StartDate as String, EndDate as String)
If Title = Num Then
tempstr = tempstr + "(" +StartDate+" , "+EndDate+") "
Else
tempstr=""
Num = Title
tempstr =tempstr+"("+StartDate+" , "+EndDate+") "
End If
Return tempStr
End Function
In our sample report, we created a matrix based on your description. It looks like below:
In textbox next to [Title], put the expression below into it:
=runningvalue(Code.AggregateString(Fields!Title.Value,Fields!StartDate.Value,Fields!EndDate.Value),Last,"Title")
Ps: In our report, we set the type of date as string when creating table and dataset. If your date type is different, use Cstr() function and convert it into string.
Save and preview. The result looks like below:
Reference:
Matrices (Report Builder and SSRS)
RunningValue Function (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

My Mac's Built in iSight is not showing all the options for the camera

On Flash bashed chat rooms such as Stickam and Tinychat, my camera doesn't respond but when I right click>settings >Camera the drop down box only shows one option (Built-in iSight) when it usually shows three (Built in iSight, USB Class Video and Something else that slips my mind right now.)
Screen shot: http://i983.photobucket.com/albums/ae318/KaitheHeartless/Picture2.png
Can anyone tell me how to fix this?
Thanks for the help!
Message was edited by: HaylieFoxe
null

Welcome to Discussions, HaylieFoxe
HaylieFoxe wrote:
On Flash bashed chat rooms such as Stickam and Tinychat, my camera doesn't respond but when I right click>settings >Camera the drop down box only shows one option (Built-in iSight) when it usually shows three (Built in iSight, USB Class Video and Something else that slips my mind right now.)
Screen shot: http://i983.photobucket.com/albums/ae318/KaitheHeartless/Picture2.png
Can anyone tell me how to fix this?
Thanks for the help! ...
Try the suggestions offered in this recent topic on the same subject:
http://discussions.apple.com/message.jspa?messageID=12717402
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Apple mail not showing all the messages?

In Apple mail, for my icloud account, I have some mailboxes which show the wrong number of messages, it shows too few.
As an example, a mailbox contains 150 messages, but apple mail reports there are only 146.
I rebuilt the mailbox and let apple mail do its thing. In the activity window I can see there are 150 messages. Yet, once apple mail has finished rebuilding the mailbox, it still tells me there are 146 messages. What's going wrong? Why would apple mail not show all the messages while in the activity window it clearly shows it knows there are 150?

Solved!
This was too weird to be real. Apple mail does not show messages it believes to be duplicates, and buy, does it make big mistakes in deciding what are duplicate messages and what not! Some of my mailboxes had over 100 "duplicates" not showing according to apple mail.
I found a solution thanks to this topic:
https://discussions.apple.com/message/18265121#18265121
defaults delete com.apple.mail AlwaysShowDuplicates
does yield an error in 10.8.2 ( Domain (com.apple.mail) not found. Defaults have not been changed. )
defaults write com.apple.mail AlwaysShowDuplicates -bool true
Does work brilliantly though!

Why is Refresh Sheet not showing me the parameters for report?

Similar Messages

Maybe you are looking for