Why is save as "as a copy" for jpg disable? cs6

Hi
hi
why is save as "as a copy" for jpg disable in photoshop cs6 updated 64 , windows 7 sp1 with the last update 64 bit?
i load a jpg file , add an adjustament layer levels -> file -> save as -> select jpg and the as a copy is disabled
thanks!

See if the keyboard shortcut Alt+Ctrl+S adds copy to the file name.
That's the old photoshop shortcut for save as copy before photoshop 6.
I should add if you were to flatten your file before Save As, then the copy box should be
available and that should add the word copy to your file name when you check
the As Copy box.
Message was edited by: R_Kelly

Similar Messages

How to save metadata in .xmp also for .jpgs?

In LR 2.5, I have selected "save the metadata in .xmp files" in the Catalog Settings, and I have NOT selected "include develop settings inside jpeg, tiff, ... I notice however that the metadata is saved in .xmp files only for photos in RAW format (which for me is .ORF, the Olympus RAW format).
In jpegs, the metadata seems to be saved in the jpeg. This is not ideal in my situation, because when I back up photos using rsync (or the time machine), all jpegs where I have modified metadata will be backed up again, causing a lot of data to be backed up, when a tiny .xmp would in fact be enough. Is there a way to ensure that the jpegs per se are not touched, and all information is stored in sidecar .xmp files?
Second question: if I select "store all metadata in xmp", when is this stored? Whenever I make a change? Or do I have to explicitly select the command "save metadata" for a folder?
Many thanks! Luca.

A reason RAWs are the only ones with XMP sidecars and JPGs don't, besides the fact it is easy to save metadata in JPGs compared to RAWs, is that when a camera shoots RAW + JPG both files have the same name except for the extension and so when an XMP with the same name except for the extension exists, it wouldn't be clear whether its metadata was for the RAW or for the JPG.
I am on a PC, so am not sure how TimeMachine works, but a well-done backup stores file differences, not the entire file, for each cycle, and also uses block-checksums to see what parts of the files have changed, so it doesn't need to read the entire backup file, nor store entire files as part of the backup process.
There is a Save Metadata to Files command and there is a Automatically Save Metadata... preference. Either one writes things out to the XMP for RAWs or the image files themselves for formats that support this. I usually have Automatically Save Metadata... enabled but I also explicitly write it out to the files before doing things like purging files off my main work drive and moving them off to a backup device because LR seems to do the Automatic Save Metadata... operation in the background and it's never clear when it is finished.

HT3702 why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

These are user-to-user forums, you are not talking to Apple here.
If it was an audiobook then they are one-time only downloads, to get it on your other devices you need to sync it to them and not re-download it oneach. You can try contacting iTunes support and see if they will refund or credit you for the second and third downloads : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Hi why is it every time i search for a site on safari it saves it in my top sites

Hi why is it every time i search for a site on safari it saves it in my top sites

I can see why this would frustrate you, jlwutzke! It sounds like you may have Block Caller ID on your account. This is a feature that prevents other people from seeing your number when you call them. This can usually be removed on My Verizon http://spr.ly/65804WyI or by calling. you mentioned you've called before. Do you know if they have already removed this?
MichelleH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

HTML - how to open "Save as ..." for pdf link

Here's the background of my problem.
BACKGROUND: I have a webpage for an eBook. The eBook is a PDF. The eBook can be downloaded by Mac and Window users. I want Safari 6.0.5 for the Mac to open the "Save As ..." dialogue box when they click the PDF Download Link for the PDF. I've gotten this to work for Firefox 24.0 for the Mac with the following html code:
<a style="margin-left:2em;display:inline;" href="file://localhost/Users/jamesminor/Desktop/eBook/Memoir/Memoir.PDF" download="Memoir.PDF">eBook</a>
When a person using Firefox 24.0 for the Mac clicks the PDF Download Link for the PDF, the "Save As" dialogue box is displayed. The person can then save the PDF to the desktop.
CONSTRAINTS: I want the pdf download file to be a PDF. I know I could compress the file with my Mac but then this file would not open for those using Windows. I can't use javascript or php code. I don't want to use self-extracting software because this most often requires that the user have software on their computer to extract or decompress the file.
PROBLEM: A Mac user can [Command]-click the PDF Download Link to display the contextual menu with Save Linked File to "Downloads" and Save Linked File As ... menu selections displayed. It the user clicks "Save Linked File to "Downloads" the following error is displayed: "Safari can't save the file. Safari can't save the file "Downloads-1.(null)" to the downloads folder." If the user clicks Save Linked File As, Export As: is displayed. If the user enters the filename, e.g., myfile.pdf and clicks "Save" the following error is displayed: "The document "" could not be exported as "myfile.pdf"." Apparently Safari thinks that what I am requesting to be saved is empty.
What I don't understand is why I can get this to work for Firefox 24.0 for the Mac . . . and can't get it to work for Safari 6.0.5 for the Mac . . .
Any help to potentially solve my problem will be greatly appreciated. I've been all over the Internet searching for solutions without any success.
Thank you in advance for your help.
Jim Minor
Message was edited by: James Minor
<Email Edited by Host>

I believe you could use the media-type attribute of xsl.output to
force download, i.e.:
<xsl:output method="text" media-type="application/octet-stream" />
or use an unknown media-type like "text/xxx".
-- Peter

System copy for ECC 6.0 system no j2ee process under MMC

Dear support,
This has been observed in many of our clients system which are on ECC 6.0 abap+java system, that after we perform system copy from one system to another
whether it is Oracle platform or mssql server platform ( system copy for oracle using controlfile script ) ( system copy for mssql with restoring .BAK file from source )
systems are running fine but j2ee process table showing no processes like
SDM, dispatcher , server0
even configtool and go.bat are unable to connect.
Is there any specific settings we do after system copy for java side
Please let me know at earliest, as it is most strange thing i have seen in almost all my system where system copy is performed.I have already raised a post against this error but at that time i was not aware of this system copy reason behind the same.
Best regards,
AjitR

Your main problem is not, that you don't see anything in MMC (the system can be added manually without much hazzle) - but is, that you database content of schema SAP<SID>DB does not match the data found on the filesystem.
If you copy the filesystem structure from production to test/qa, you need to make sure, the database and filesystem are in sync. You will have two problems if you "just copy them":
- They are out of sync because your production was going on running since you copied the backup files
- all configuration (all java property sheets) is/are set to point to the production system instead of the test/qa system
I doubt, that it will work if you copy it over. This also explains, why you can't even start configtool, because it points to the wrong system/schema. You MAY be able to fix all that manually, but you may encounter subsequent errors because not all configuration is documented, you would need to step into the whole j2ee tree and look at each and every propertysheet to find out, whether it's correct or not. Additionally, the database may have other information (see above) and all that may become overwritten during bootstrap.
So - the best way to get your system up and running quickly is to start sapinst on the source system, export your Java instance (not using ABAP but the Java dump) and re-importing that to your test/qa system.
Markus

Why no Acrobat Pro 9 trial versions for Mac

I received my upgrade box for CS5 and the instructions said to delete (uninstall) Acrobat Pro 9 and then re-install it from the included disk. No big deal, I installed CS5 then uninstalled Acrobat as instructed, popped in the DVD of the new Acrobat Pro 9 that came in the box and up pops a message that every Mac users knows asking what I'd like to name the blank DVD and if I would like to mount it? That means the DVD is bank and never been burned. Confused I put it in my laptop with the same result! It was a blank DVD from Adobe!
Looking at the back of the disk it was clear it had never been burned to, you can tell when a disk has an image on it or not.
So thinking I'm clever I go to the download site to download a trail version of Acrobat Pro 9 thinking I could install it and when the question comes up to use it in trial mode to enter a serial number I could just enter the number and be done with it.
So I followed the procedure and waited for the emailed link to tell me where to get my download from, 10 minutes later it showed up, I followed the link and the pull down option only showed 4 versions to download, all for Windows! I searched and searched and could not find a Mac version anywhere.
Today I was able to get customer service on the phone who was glad to ship me another copy, they at firs suggested I just download the demo (just like I tried the night before) and I told them I could not get a link for the Mac. She put me on hold, then came back to the phone apologizing and telling me I was correct, there is no trial or download version of Acrobat Pro 9 for the Mac. I would have to wait for the replacement DVD.
So to me the question is I would have a hard time believing there are more Acrobat Pro 9 versions on PC's than on Macs even though there are so many more PC users. I've never met a single Acrobat Pro user on a PC and I work in IT/MIS at several very large companies. Only the Mac people ever seem to want the pro version, sometimes a few PC users in Marketing or legal want the Regular Acrobat but not the Pro version.
So Adobe why no Acrobat Pro downloads or trials for Mac users? Seems the long standing good relationship between Mac users and Adobe continues to be neglected and diminished. This is hardly the only item I've come across in the last few years where Adobe treats Mac users like secondhand users.

What extra work! two, three lines of extra code (may just one) to put a time limit in, that can be overridden with entering a bought serial number. Even shareware peopel do it.
And I remeber when Acrobat only worked on Mac's. You see it was introduced to Mac's first. Microsoft wouldn't allow it until version 3 or 4. If I still had my 7100/66 I might could prove was I one of the beta Testers. But that machine was traded in on the G4-500 (which I still own).
Most major software companies will come out with a new application on the Mac first. Because Mac users tend tobe willing to try out something new on the cutting edge. Then when its prefected they come out with a PC version, and forget about the Mac community.
Look I am 61. And I didn't just fall off the turnip truck yesterday. I've been around since before the days of the moden internet. I started with Buliten Boards on 300 baud modem on an old fashion POTS line. Cost me a fortune in Phonebills
So don't discount my experiences so lightly. I've used appliactions such as ATM Aldus PageMaker (yes you heard right Aldus). I've use Word Perfect for Mac and PC back when it was owned by WordPefect, then Novell) I've use Microsoft works when it came out for the SE/30. Lotus 1-2-3 both on Mac and PC, FaxSTF, and other that are now none existent on the Mac. Chance are I was using Computers about the same as some of you and probabaly earlier than some. I lived it.

Why opening from java the rpt search for a JNDI when it's setup for a DNS ?

I downloaded CR for eclipse 2.
All is 'quite' working froma a java app.
i've only a problem with an 'jndi name search error'. I'll try to explain.
In the RPT i use a DSN connection to a sql server into a differente machine. When I open directly the rpt, all is working.
From java code, i'll open the report, but when i try to export to pdf iit tell me about an error 'jndi name search error', with the name of the DSN connection i setup.
Why? Why opening rpt all is working, but opening from code NOT is working ?
What's the difference from two opening methods? Why an .rpt opened from java cannot just open the connection like when opened from cristal report !?
*My question is: why opening from java the rpt search for a JNDI when it's setup for a DNS connection ?! *

The .rpt has been originally created from an ancient version of Cristal report. probably the '8'.
In an italian software called 'Business', the .rpt is populated for printing of invoices and similar docs.
My society is trying to 'integrate' our software with the .rpt used from our customer.
So we want simply open .rpt, add a new logo, set the selection for record and save as pdf.
We so bought Cristal report 2008 (v.12 ), opened the .rpt, saved (so it 's now in a supported version).
The sql server is located at 10.1.2.40, and is a Microsoft Sql Server.
In my development pc I've installed Cr 12. I added a User DSN to point to Sql server at 10.1.2.40, at right DB with username and password. Opening from my development machine the .rpt and 'running' it, it display the data. Ok !
I downloaded CR4 Eclipse 2.
I open report using the unmanaged sdk. (to access it through file system, not via RAS), Ok.
I set selection record. Ok.
I execute .export with 'PDF' for format option and here I get an exception: the JNDI name 'CPR' is not found. Where CPR is the DSN name setup into .rpt from Cristal Report 2008.
So, no, i'm not trying to using the designer from Eclipse, but from the full application. But I must use the rpt at runtime to export some rendered records.
What must I do to do this?
CR4E only supports java based connections, so it is looking for the JDBC/JNDI name and won't look at the DSN's.
How Can i setup at runtime a JDBC / JNDI connection ?
I already have a 'connection' from my code to the sql server, using sqlserver jdbc driver v. 4 from microsoft. And executing query I see the results. So i have right driver, ip, db name, user name and password
But is there a way to simply tell at runtime to my .rpt to use THIS connection? Or a similar connection...
Thanks in advance for help provided to us. (we bought a CR license only for this work...)

Unable to click 'Set and save as my Active Configuration for this project'

Environment: OWB 11.1.0.6 Client running on Windows XP Pro SP3 repository and targets on AIX (IBM UNIX).
I have created a new Configuration under a specific Project and I'd like to make this configuration the default whenever I login and select this Project.
There is a check box when I right click the Configuration and select 'Open Editor' that says 'Set and save as my Active Configuration for this project' but when I select the check box and try to click on 'OK' there is no response from the popup window and I have to click 'Cancel' to get out of the popup.
Any ideas on why this is happening and how to get around it??
Thanks very much.
-gary

Si
Good catch!! Restarting the app???? What a waste of time!! :-(
When I went back in the box was already checked! It must have known I was pissed at it!! :-)
Thanks for the help.
-gary

Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? Many thanks.

Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? My iPhone was stolen and the photos in it are very precious to me. Many thanks.

On a new device you can only download what is currently stored in "My Photo Stream" in iCloud. iCloud keeps up to the last 1000 photos, but only the photos, that have been added during the last month. Older photos may be removed, when the time is up. On other devices you may be seeing older photos as well in "My Photo Stream", that will depend on the available storage on those devices, and when the Photo Stream has been enabled on those devices, see: My Photo Stream FAQ - Apple Support
If you are seeing other photos in the Photo Stream on other devices, that you want to save, mail them to you from the other devices.
Have you tried to restore your iPhone from the last iCloud backup of the old phone? The backup will contain the photos in the Camera Roll, but not the photos in Photo Stream. iOS: Back up and restore your iOS device with iCloud or iTunes

Make local copy for any submit form data provided prior to send/submit

Dear Sir/Madam,
I am trying to achieve a behaviour of firefox 22 under Ubuntu 13.04 Linux that has to do with forms/submit.
The result I want to achieve is to have a copy filed for each registration form, personal information provided like job application forms done on websites with multi step submit/apply button at the end.
The copy "bill" I am after would simply be adding on a scroll the screenshot for the webpage(including scrolling areas) to a localcopy.
The idea is to look for words like "register", "Address" "Job", "Application" on the page where a form/submit has been detected and simply compound save all displayed steps with data inserted by me.
For me a lot of this makes sense since prior to for example sending mails or letters by post I file a local copy for my reference ect. This would be an electronic equivelent of it.Saving tremendous energy and time compared to manually saving each step and then looking for a way to name/organise and "collage" all the bits into one receit/bill/scroll.
How can I modify or achieve this behaviour on Firefox 22 under Ubuntu?
I have installed addons like InFormEnter, SessionManager iMacros Lastpass...
an arrow/menu started similar to InFormEnter near a submit button as a method to confirm a loacl copy prior to sending would be ideal.
Sincerely yours,
Nikita K. Tsarov

UnMHT is OK but it doesnt work well when used with the HP chat support window... Here is an attempt to explain what I am trying to get at
https://docs.google.com/file/d/0B0Kuhf6iBidTZWZWeUxrR2dYajg/edit?usp=sharing
Feel free to add any comments tips directions...

Why iTunes can't let us copy the songs that is from our iPod to our PC?

I do not know why iTunes can't let us copy the songs that is from our iPod to our PC.

They should be in iTunes or on your backup.
If for some reason they are not on your computer and you have failed to maintain regular backups, see this post by Zevoneer -> http://discussions.apple.com/thread.jspa?messageID=11646661&#11646661

Why iMac turns by itself to "wake for network access"?

Hello,
does anyone know why my iMac turned automatically "Wake for network access" mode in Energy Saver preferences?
I just installed 10.8.2 Mountain Lion to my iMac and changed sleep time to 1 hour and display sleep to 25 min.
Created second user for other family member. And saw that when computer display sleeps and I wake up it, they ask me a password (there was no such thing on 10.6 to ask password just after display turns out).
So, after all I Restore defaults of Energy saver and saw, that "Wake for network access" by default is unchecked?
Should I worry about somekind of hijacking?
P.S. Sorry for my english.

up!

How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

Well I understand that auto save is already present and saving your doc every 5 mins. But then why do you think, this did not happen yesterday in the following case?? I wrote one page of a long document and wanted to format it before proceeding. I selected the part to be formatted and instead erased it. I could not find that page again. I had to rewrite the matter.

Why do not Apple send a fix for all fail´s / slow mac`s afther upgrade to Yosemite

I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
Here is a test for my mac.
EtreCheck version: 2.1 (101)
Report generated 4. desember 2014 kl. 22.48.33 CET
Hardware Information: ℹ️
MacBook Air (Verified)
MacBook Air - model: MacBookAir6,1
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:12:8
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500,28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/Library/Application Support/Kaspersky Lab/KAV/Bases
[not loaded] com.kaspersky.kext.kimul.38 (38) [Support]
/Library/Extensions
[loaded] com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
[not loaded] com.kaspersky.kext.klif (2.2.1d19) [Support]
[not loaded] com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
[not loaded] com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
[not loaded] com.zg.driver.cdc_ecm_qmi (1.9) [Support]
[not loaded] com.zg.driver.cdc_usb_bus (1.9) [Support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[failed] com.kaspersky.kav.plist [Support] [Details]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
[failed] com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
User Launch Agents: ℹ️
[running] ca.indev.MailTagsHelper.agent.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[loaded] com.parallels.mobile.startgui.launchagent.plist [Support]
User Login Items: ℹ️
iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
fuspredownloader ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
nplastpass: Version: 3.1.61 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
userinternetplugins ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Facebook Cleaner
Pin It Button
LastPass
ResizeMe
OpenIE
3rd Party Preference Panes: ℹ️
Cineform [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
Destinations:
Data [Network]
Total size: 3.00 TB
Total number of backups: 65
Oldest backup: 2013-08-15 20:20:51 +0000
Last backup: 2014-12-04 17:20:31 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 496.30 GB X 3)
Top Processes by CPU: ℹ️
     4% WindowServer
     1% fontd
     1% cloudd
     0% Safari
     0% launchd
Top Processes by Memory: ℹ️
369 MB com.apple.WebKit.WebContent
155 MB Safari
103 MB Feedback Assistant
86 MB Finder
69 MB mds_stores
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.60 GB Active RAM
652 MB Inactive RAM
820 MB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:37:00 PM Self test - passed

[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
Your machine is slow because you loaded a bunch of third party junk on it.

Why is save as "as a copy" for jpg disable? cs6

Similar Messages

Maybe you are looking for