WHY IS 'SHARE' IN LIGHT GRAY AND NOT RESPONDING FOR EXPORT??

When I attempt to export my file......via SHARE then export media onto external hard drive OR Youtube.....the whole of the SHARE column is pale Gray, so i cannot export my work.
I have been exporting for months........Someone suggested MacKeeper is to blame....I have recently taken a subscription to MacKeeper....Any thoughts greatfully recieved.

Tom, instead of trolling either be helpful and post the most relevant posts that worked or don't post at all.
So far most of those posts had no viable solution except remove prefs and reinstall.. which mainly get, that didn't work.  It's like we've gone back to windows and asking for a reboot as first level tech support.
Why is it happening, what has changed, and what can be done to diagnostically look into this further?
Edit: here I compiled the last month or so of searched requests--just in case:
https://discussions.apple.com/thread/4150606?tstart=0
and if uninstalling/reinstalling doesn't help you, as it hasn't a few of us, then you're out of luck as I've heard no solutions beyond it.

Similar Messages

  • I set in prefferances plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

    I set in preferences plug-ins. Show all filter gallery groups and names, but they are still light gray and not selectable

    They are being shown.  When Photoshop gray out items it means in the documents current state  that item is not supported,  Get the document into a state that the grayed out filters can be used.  Some filters mat not support some modes like CMYK. 32bit color, Lab etc. They seem to be listed but nor currently applicable. Note whem no document is open all are grayed out the when a simple clipboard image is open all are available.

  • HT201413 iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    Mikey, I have the exact same problem. Dropped my 3gs on Thanksgiving, phone was not responsive, plugged into the wall charger, went to grey iPhone restore screen, then said to connect to itunes. So I plugged it into itunes but itunes wont recognize it nor will my computer. I searched the internet for hours with no success. I tried to change USB ports and cords, tired removing the SIM card, reinstalled itunes, everything. When I put it in DFU mode itunes recognizes an iphone in recovery mode, so I click restore and update, then I get error 1602 every time. My iPhone also loses power when I unplug it from the wall. I do not know what to try next. You are the only person I have found with the same exact problem I have. I will update you if I find a way to get my phone working again and I hope you will do the same. I'm very frustrated

  • Why is it that text in Mavericks and Safari renders as medium gray and not black, anymore?

    Why is it that text in Mavericks and Safari renders as medium gray and not black, anymore? In Mountain Lion and Safari 6.x this was not a problem.

    Have registered the following to the feedback link above by macjack:
    Mavericks renders most text as a gray (65 +/- in all three RGB using Digital Color Meter) and not black.
    This is a big change from pre-Mavericks and is especially difficult in Safari; worse still in Safari "Reader" where sub-heads in Reader-ized text are still paler.
    Especially for older eyes this does not fly. This user is close to downgrading to Mountain Lion and Safari 6, where this was not a problem.
    Stout rap on the nose: Jony Ive should be shorn of his glasses/contacts and forced to read only on these displays and OS versions until he cries out for the opthomalogist. One can only conclude this problem exists because those who came up with it were never in need of actually using it.
    Make the text BLACK.
    It's the same story on our MacBook Airs and MacBook Pro.

  • HT1386 music is light gray and can not play

    I have a list of all the song in libery. They are light gray and can not be played. THe sync logo is on the far right and will not go away even after i sync.

    Hey there devilbunny504,
    It sounds like the affected songs work fine on your computer but will not play back on your phone at all.
    I have a few recommendations here. First, close the Music app, and all other running apps on the phone.
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    From: iOS: Force an app to close
              http://support.apple.com/kb/ht5137
    When you have done that, restart the phone and the computer:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Then try the sync again.
    Take care,
    Sterling

  • HT5858 My control center is opaque gray and not translucent. Why?

    My control center is opaque gray and not translucent. Also happens with my notification center.
    I tried restoring several times but in the end is always the same.

    A Community Specialist recommended to go to Settings -> General -> Accessiblity and turn off 'Increase Contrast' in this thread: https://discussions.apple.com/message/23026678
    They also stated this:
    "Keep in mind that if your background is white or a light color, it will not appear to be translucent, and be more opaque."

  • CS5 - Why are Edit Auto Blend Layers (and Auto Align Layers) gray and not accessible?

    I have CS5 and would like to try focus stacking.  I File > Automate > Photomerge with a few photos.  They have been aligned in layers.  I would like to Auto Blend Layers but the function is gray and not accessible.
    Thanks,
    Mark

    Thank you THANK YOU.  As I was doing this I realized you asked me to show my selected layers.  I haven't been doing that.  I thought photoshop would blend all open layers.  Thanks again.

  • Average filter but the image is gray and not color RGB

    Hi,
    i use this code for an average filter 3x3, the result is the image whit average but gray and not RGB color.... why??
    thanks in advance
        public void Average()
            int values[]=null;
            int input2d[] = new int [image.getWidth()*image.getHeight()];
            int [][] output2d=new int [image.getWidth()][image.getHeight()];
            image.getRaster().getSamples(0, 0, image.getWidth(), image.getHeight(),0,input2d);
            for(int y=0; y < image.getHeight(); y++)
                for(int x=0; x < image.getWidth(); x++)
                    int count = 0;
                    int average=0;
              values = new int[5*5];
                    for(int s = 0; s < 5; s++)
                        for(int r = 0; r < 5; r++)
                            try
                                values[count] = input2d[(y-2+r)*image.getWidth()+(x-2+s)];
                                count++;
                            catch(ArrayIndexOutOfBoundsException e){ }
                    //trovo il valore medio dell'intorno 5x5
                    for (int temp=0; temp<count; temp++)
                        average+=values[temp];
                    int valpixel=average/count;
                    output2d[x][y]=valpixel;
            image2 = new BufferedImage(image.getWidth(),image.getHeight(), BufferedImage.TYPE_INT_RGB);
            image2.getGraphics().drawImage(image,0,0,null);
            for(int y=0; y < image.getHeight(); y++)
                for(int x=0; x < image.getWidth(); x++)
                    image2.getRaster().setSample(x, y, 0, output2d[x][y] );// componente R
                    image2.getRaster().setSample(x, y, 1, output2d[x][y] );// componente G
                    image2.getRaster().setSample(x, y, 2, output2d[x][y] );// componente B
        }

    Can hel me please!!!

  • I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users.  Why are they in the libary and not in the itunes music folder. Win 7 OS

    I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users.  Why are they in the libary and not in the itunes music folder. Win 7 OS.  When I look in the library under the get info screen it says they are in the folder itunes music, under the c: drive but when I actually go to that folder to look for them they are not there....HELP!

    Hello RumDog,
    I think this article will help you find the media in your library.
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Discovering and changing the iTunes Media folder location
    Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
    Mac OS X: Click the iTunes menu and choose Preferences.
    Windows: Click the Edit menu and choose Preferences.
    Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
    You can then:
    Note where your media folder is, such as for backing up your media.
    Use the Reset button to reset it's location to the default (which is the iTunes folder).
    Click the Change button to select a folder for a new location. Once you change this location:
    If you make a new or alternate iTunes library, the new location will be used by that library.
    Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
    From: Where are my iTunes files located?
              http://support.apple.com/kb/ht1391
    Cheers,
    Sterling

  • Why do i get 2 curves and not just 1 when i create a diagram from a row of data in a table ?

    Why do I get 2 curves and not just i when I create a diagram from a row af data in a table ?

    Erik,
    Thank you for giving me the points.  Generally you wait to award points until your problem is solved.  It is totally your at your descretion.
    OK.
    This is still not clear.  To post a screenshot get the "stuff" you want to show in view on your screen, then type the key combination <Command>+<Shift>+3.  The cursor will change to a crosshair.  Click and hold on the top-left corner, then drag to enclose what you want to show (to the bottom-right corner), then release.  The screenshot will appear on your desktop and will be named something like "".
    Now click the camera icon in the tool bar for this forum:
    , click the text box to allow you to navigate to, and select your screenshot.
    Here is what you sent me:
    The graph does not seem to be associated with the table of data you are showing.  Generally when you highlight a graph the corresponding table will highlight and show the source of each of the series in the graph (dark and light blue).
    This is what I would expect to see when highlighting a graph:
    Right now I think there is ANOTHER table arround that is the source for the graph and the table you show is "just another table".  You can move your data into the table the graph refers to by copy and paste, or simply typing the values.  You can change how many series there are by grabbing the little circle at the bottom right of the highlighted cells (when you have the graph highlighted) and dragging as shown:
    The Numbers Users' Guide is a great resource you should utilize and can be found here:
    http://support.apple.com/manuals#macosandsoftware
    The chapter on graphing (or charting) is 7 and starts on page 134.

  • The keys are sticking and not responding. Any ideas why? No moisture has come near it.

    Why are my keys sticking and not responding? No moisture has come near the laptop.

    Andy-
    When printing, the printer should be visible if it is an AirPrint printer, connected by WiFi or to a WiFi router via Ethernet (NOT USB), and the WiFi router is capable of correctly handling Bonjour data required by AirPrint.
    To determine if your printer is capable of AirPrint, see <AirPrint-enabled printers>.  Even if it is on that list, it may be necessary to update the printer's firmware before AirPrint will work.
    It may be possible to change the setup or update the firmware of a WiFi router that does not work with AirPrint.  Contact the router's manufacturer for info, if that is the problem.
    Search the iTunes App store for iPad printing Apps from your printer manufacturer.  There are other printing Apps such as Print n Share, but these are not as convenient or as easy to use as AirPrint.
    It is also possible to share your computer's printer as AirPrint over WiFi.  One program that does this is Printopia for Macintosh.  For a free solution, search the web for AirPrint Activator.  Versions are available for both PC and Mac computers.
    Fred

  • When I try to print from Lightroom the program appears to go into safe mode(light gray) and never opens print options

    I am trying to print a photo in Lightroom. I go to the print tab and it appears the program goes into safe mode(light gray) and does not open print options. All other functions of the program are working. I am not getting a memory low warning or other error messages. What would cause this problem?

    DO NOT use HP's software for installing the printer, locate the uninstall directions from HP and uninstall ALL the HP software. Then follow the instructions located in Apple's Wireless Printer Install advice letter.

  • IMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

    iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

    Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
    THe Share to iDVD option is only activated if your source material is DV or AVCHD.

  • I have 27" IMAC and My Half screen is Light Gray and Half is White

    I am using IMac 27" My Screen is Half Light Gray and Half White Please Advice

    A trip to an Apple store is required. you have some type of hardware failure and only Apple can fix that.

  • Why IPC uses CRM as database and not R/3 ?

    Hi ,
    can any one help me with an answer for the following question :
    <b>Why IPC uses CRM as database and not R/3 ?</b>
    Points will be rewarded for helpful answer
    thanks
    ritu

    Hi
    IPC have Sales Pricing Engine, Pricing Configuration engine and TTE which helps to maintain the similar R3 pricing settings. As you are aware pricing in R3 is determined by Sales area, Cupp, DPP, so IPC is capable of determining the Pricing using same R3 standard procedure. T
    This is not available in CRM, so CRM needs IPC to undertake the determine pricing/ calculate the pricing of the products.
    Regards
    Nagarj

Maybe you are looking for