Why is Shutterfly certification invalid when using Elements 8 CREATE?

In Elements 8, under CREATE, there is an option to develop a photobook via Shutterfly. When attempting to use this option to access Shutterfly, an Adobe message declares the certification is incomplete and that certification expired in 2013 BUT scrolling down in that message the user is told the certification is valid into 2016. How do I overcome this issue? Shutterfly advises this is an Adobe issue.

This is the Photoshop forum. Photoshop and Photoshop Elements are very different.
The Photoshop Elements forum can best help you. Photoshop Elements
Gene

Similar Messages

Why won't cells autopopulate when using numbers on the ipad? Anyone have a fix? Have also created a dropdown menu, but that does not translate from excel to numbers either.

Why won't cells autopopulate when using numbers on the ipad as they will in excel? Anyone have a fix? I have also created a dropdown menu in excel, but that does not translate from excel to numbers either.

Glad you got it sorted out.
Diane123456 wrote:
> Thanks Vix, Joe, and Mad Dog for responding, the site is
in
> development so it's behind a password, which I probably
could share
> but MD is right, it was a margin issue. I didn't think I
needed to
> set a margin but I had to put a left margin of 2em on it
for the
> numbers to display on IE7 or IE6
>
> This is actually a rather common issue with CSS layouts
(it is not an
> issue with designs using tables) - there are several
posts for ULs
> which you may be interested in - see
>
>
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=
> 1981&productId=1&loc=en_US
>
> -- and once I got the numbers to show I ran into the
same problem as
> the commenters on the above thread, which noticed that
the vertical
> alignment doesn't work well with IE, and which noted
that apparently
> IE has a stutter because it just kept repeating "1" "1"
"1" -- so I
> finally went with a hanging indent and just put the
numbers in there
> manually - fortunately it's not a long list.... if you
have a fix
> for the stutter, or know of another place to get help
with CSS layout
> browser quirks please share -- if I find another one
I'll share also
>
> thanks again, Diane

Why does iMovie abruptly abort when using record voice over?

Why does iMovie abruptly abort when using record voice over?

Hey PTD1,
Thanks for the question. If I understand correctly, iMovie unexpectedly quits when using record voiceover. I would recommend that you read this article, it may be able to help the issue.
iMovie: How to troubleshoot "Application Unexpectedly Quit" messages - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

HT3310 Why can't I hear when using my ear plugs on my I-pad

WHy can't I hear when using my apple ear phones on my I-pad?

Make sure that they are inserted all the way into the jack. It takes a firm push to insert them all the way.

Get ora-00119 erro when using DBCA to create database?

Hi, friends:
when using DBCA to create database, after finishing all steps and let DBCA to create database automatically, bump into an error:
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132:syntax error or unresolved network name 'LISTENER_mysid'
ORA-01078: failure in processing system parameter
this is 10.2.0.3 version oracle, the server is sun10, no other instace created yet.
just Oracle software installed.
Can any friends help?
thanks a lot in advance!

See on metalink:
ORA-119, ORA-132 ORA-1078 Received From DBCA After Applying 10.2.0.3 Patchset
Doc ID: Note:433817.1
There's an entry LOCAL_LISTENER created in pfile/spfile, that's a bug.
Werner

When using Pages to create an EPUB file, how would I force a page brake?

when using Pages to create an EPUB file, how would I force a page brake?

Sory Peter but you don't seem to understand.
If you pick up an e-book by random on the iBook Store, you will see that professional e-books ALWAYS start their chapters at the top of a new page, whatever the reader, the color of the page or the size of the text are.
I know how to add a new chapter with the use of the appropriate style in Pages but I want to be able to divide SECTIONS as well.
What I want to to do is to force a page break in between two paragraphs and apparently, this option is not possible with Pages.
Rémy.

Why is Windows 7 freezing when using Firefox?

-Has been happening for months now with many attempts to pinpoint cause. Have come to the conclusion that it is Firefox but don't understand why.
-When using Firefox, my entire PC, not just Firefox, will freeze. Sometimes it happens within the first 5min of using Firefox, other times it could happen an hour into a session. A hard restart is the only way to get back to my desktop as I have waited an hour before after a freeze and nothing happens. Mouse pointer won't move, nothing.
-Initially thought it was a hardware issue or an anti-virus issue.
-Reinstalled windows on three different hard drives that all pass the disk check. Still happens
-Installed windows 8 to see if that would fix the problem. Nope, does the same thing on Windows 8.
-Ran Memtest 86+ for 14 hours one night to see if it was my memory. Nope, zero memory errors found
-To be sure I even tried only using one stick of ram in my PC at a time to see if any of the sticks were bad. Nope, it froze with every stick
-Tried changing my anti-virus. It froze with every single one, AVG Free, Avast Free, Microsoft Security Essentials.
-I figured out that my PC only freezes when I am browsing the web in firefox. If I use chrome or Internet explorer, it doesn't happen. These total PC freezes only happen when I am using firefox.
-My only add on/plug in that I am using is Adblock plus besides the default ones that come with Firefox.
-My firefox is up to date, I have reset it and reinstalled it [while only adding Ad Block +] and this still does not fix the problem
-In the windows event log the only thing that happens every time my PC freezes is the Error "Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D", why this would only affect Firefox, I don't know.
-I would like to figure out the cause of this because I would really like to use Firefox again.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Error When using Element level link in Dataset Joins

Hi All ,
I am joining two data sets using element level link ,I am getting the following Error message
ORA-00972: identifier is too long at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405) at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931) at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481) at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205) at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548) at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217) at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947) at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823) at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671) at oracle.xdo.dataengine.XMLPGEN.processQuery(XMLPGEN.java:1660) at oracle.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:462) at oracle.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:387) at oracle.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:885) at oracle.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:906) at oracle.xdo.dataengine.XMLPGEN.processGroup(XMLPGEN.java:846) at oracle.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:496) at oracle.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:387) at oracle.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:288) at oracle.xdo.dataengine.XMLPGEN.writeXMLDataStructure(XMLPGEN.java:221) at oracle.xdo.dataengine.XMLPGEN.processDataSet(XMLPGEN.java:1575) at oracle.xdo.dataengine.XMLPGEN.processMergedDataSet(XMLPGEN.java:1345) at oracle.xdo.dataengine.DataProcessor.processData(DataProcessor.java:376) at oracle.xdo.servlet.dataengine.DataProcessor.processData(DataProcessor.java:317) at oracle.xdo.servlet.dataengine.DataProcessor.render(DataProcessor.java:671) at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:280) at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346) at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101) at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074) at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639) at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492) at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462) at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:261) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)</
I used alias names for all the columns not to Exceed characters limit of 30 .When i use group level join ,there is no Error .Please help me on this ,I want to use element level link
Thanks,

I put in the curly brackets so my formula now reads
"Total inquiries for " + {CnAttrCat_1.CnAttrCat_1_Description} + ": " + ToText({@InquiryTypeSubtotal})
Now when I check the formula I get the error message "This field name is not known."
Alec

Why wont Youtube videos load when using Firefox 3.6.3?

I've been having issues with youtube when using firefox, the video doesnt load or show up for that matter its just a black screen where the video should be and on the bottom left hand corner of Mozzilla it says "done" I've tried everything, I updated java and flash but nothing seems to work. What can I do? I know I can use other web browsers but I really want to fix this
== URL of affected sites ==
www.youtube.com

There are a few reasons why youtube might be broken:
* An extension may be causing the problem: try the steps at [[Troubleshooting extensions and themes]]
* ''Bad item stored in the Browser Cache'': Follow the steps at [[How to clear the cache]].
* Firewall software is blocking some resources on the page: see [[Firewalls]]
If none of this works, let me know if Flash video from other sites work. Here are a few you can try:
*[http://www.dailymotion.com/video/x9hvlb_3d-toy-story-3-2010-teaser-trailer_shortfilms]
*[http://www.hulu.com]
*[http://www.cuatro.com/el-hormiguero/videos]

Why is there an offset when using DateConvert with DateCompare?

I'm developing on my local server and my current timezone is GMT +11 hours.
<cfset date1 = DateConvert("Local2UTC", now())>
<cfset date2 = '2014-03-06'> 
So, I was expecting that when I ran this code:
#DateCompare(date1,date2,'d' )#
that it would return a "-1" but it returned a "0" implying that the "day" was the same.
So, to double check I output:
DateConvert("Local2UTC", now())
grabbed its displayed value : {ts '2014-03-05 07:08:58'} and inserted that for comparison thus:
DateCompare("{ts '2014-03-05 07:08:58'}",date2,'d' ) and sure enough, it did return a "-1" reflecting that the day of date1 is indeed earlier than date 2.
Further investigation showed that I had to add my timezone difference to date2 in hours thus:
<cfset date2 = '2014-03-06 11:00:00> to get
#DateCompare(date1,date2,'d' )#
to return a "-1".
Is this a bug or am I misinterpreting??

Hmmm, like with like and all other good practices aside, there is a bug. Also, like just about everyone else, I develop locally in one timezone +10 hours and run my sites remotely on a different timezone -5 hours, altogether a significant time difference. So after coming to understand how to deal with the bug I've come up with a way to compare dateTimes on the remote server, but it does require a spot of copying a string in where you've been advising not to.
First, to the dateCompare() bug. To expose the bug we better use a finer increment than days, so instead of specifying, simply leave the “datepart” attribute empty so that it defaults to seconds. You say you’re in a +1hour timezone so try this.
Presuming a local time of 16:00 on August 7th 2014
<cfset date1 = DateConvert('local2Utc', now())>
<cfdump var="#date1#"> should produce {ts '2014-08-07 15:00:00'}
Now create a dateTime using CreateDateTime(2014,08,07,15,30,00) This time half way between your local dateTime and UTCDateTIme.
<cfset date2 = CreateDateTime(2014,08,07,15,30,00)>
Now compare them <cfdump var="# DateCompare(date1, date2 )#> in this example on your local server, you would expect to return a -1 since date1 is earlier, but in fact it will return a +1 because it seems to be somehow only looking at the now() time (later) instead of the UTC converted time. This is a bug, DateCompare should not care where it gets its data from it should simply get it and then compare the two values. Usually there is no problem using dateCompare but when used in conjunction with the DateConvert('local2Utc', now()) it ignores the value generated by the conversion. Anyway, so much for the bug, Now to the procedure that I’m using that requires copying a string.
I’m wishing to compare a dateTime that I want something to stop being displayed on the remote server.
<cfset myDate = CreateDateTime(2014,08,05,17,0,0)>
<cfset myDateInUTC = DateAdd("s", GetTimeZoneInfo().UTCTotalOffset, myDate)>
<cfdump var="#myDateInUTC#">
This produces the string: {ts '2014-08-15 07:00:00'} .
I then generate currentUTCDateTime from:
<cfset currentUTCDateTime = DateAdd("s", GetTimeZoneInfo().UTCTotalOffset, now())>
Both these dates are then compared thus:
DateCompare(currentUTCDateTime, "{ts '2014-08-07 15:00:00'}" )
I have to generate the string on my local server and then upload it which is why I’m unable to simply use a function. It’s a bit convoluted but it does work. Note that in this example I’m setting the currentUTCDateTime using DateAdd instead which doesn’t trip up like DateConvert.

Why is there an echo when using FaceTime on my Mac Book Pro?

Why is there reverb when using FaceTime on my mac book pro?

Sounds just the same and as bad with headphones/headset as from internal speaker. Others have reported this problem. Has a solution been found yet?

WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATa?, WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATA?

why my iphone 4s getting hot when using 3g plus with data?
then my phone left side speaker didnt work when i list songs?

It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.

Why does my mac restart when using FCP X?

When using Final Cut Pro, why does my Macbook Pro restart the middle of a project?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Why is the response time when using clickwheel...

I've bought a new 60gb video and, in comparison to my 20gb 3rd generation, the response time when using the clickwheel (next track/pause/play/bak track) is annoyingly long on start-up. And the display takes seconds to catch up with what's playing sometimes freezing with half of the one 'page' showing and half of another. Should I expect this because of the larger capacity/more complex iPod?
Also, in an earlier post I noted that when the iPod first fires up, tracks seem to stop and start - just for a second or so, 3 or 4 times within the first 15 seconds. It's not the track on iTunes as it never happens on my 3g.
Dell Windows XP

Definately sounds like a faulty harddrive.
You could always try restoring it with the most recent updater, and reloading everything - kind of like a fragmented harddrive, I am noticing better performance since I last wiped it clean and relaoded it (due to another error - actually)....

Why do I get artifacts when using the adjustment brush to increase or decrease exposure?

When using the adjustment brush to darken a background I get white or light colored artifacts. When using the brush to lighten the eyes of a person I get brown artifacts that look like freckles in the area of adjustment. That didn't happen in LR 3.

Here are the screen shots with the original, with Auto Mask on and without Auto Mask.
Thanks to C. Frans W for the suggestion of it being an Auto Mask issue.
Dorin, if you have any other comments, I would welcome them.
If C. Frans W has additional comments those are welcome also.

Why is Shutterfly certification invalid when using Elements 8 CREATE?

Similar Messages

Maybe you are looking for