Why is Site Slices pushed down when i add text?

how come when i upload my site and when i add too much words
it pulls the bottom away from the original layout. I can only fill
the box half way of words and when i pass that it will move it
down. Why does it do that?

"camerapro" <[email protected]> wrote in
message
news:enf6cf$39t$[email protected]..
> Revised Promblem. I have my site uplaoed to web and it
is all sliced but
> bottom
> slice is pushed down. Everytime i go past a certain
point with the text it
> pushs down the bottom slice. What am i doing wrong.
>
Probably because you may have used a graphics program to
write your html
code for you - did you? Or did you use layout mode in
Dreamweaver? I can't
see a link to the problem page... so I'm assuming. What
happens when you
have a rigid table layout for example, is that whenever you
add text to a
cell, that cell expands and the adjoining cells will push
your original
design out the window.... this may help:
http://apptools.com/rants/spans.php
You may need to look at using nested
tables.......
Nadia
Adobe® Community Expert : Dreamweaver
Tutorials |SEO |Templates
http://www.DreamweaverResources.com
http://www.perrelink.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html

Similar Messages

Why did my phone shut down when I started updating software?

Why did my phone shut down when I started updating software?

Hi Patraposo,
Thanks for visiting Apple Support Communities.
It is difficult to know why devices behave unexpectedly; however there are several articles on the Support site that can help recover your iPhone if the update did not complete.
If your iPhone will not turn on, start with the steps in the "Power/Battery" section of this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If you just see the "connect to iTunes" screen, the steps in this article can help:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If you see another symptom, feel free to reply with more information.
Best,
Jeremy

Why does my macbook shut down when I am watching a film using airplay on apple TV?

why does my macbook shut down when I am watching a film using airplay on apple TV?

It appears to shut down and all the open programmes are closed

Why does my Safari shut down when loading a page?

Why does my Safari shut down when I'm trying to load a page?

Is this for a Mac? You posted in the Beta for Windows section, you might want to try the Beta for Mac pages instead and see if anyone there know a good fix. Is this just with Adobe's PDF reader, or with Preview too? A workaround could simply be switching to a different reader, if you simply cannot find what causes the crashes. A clean reinstall might do the trick, if you haven't done so already.
If this is on Windows than I would recommend downloading the PDF plugin from http://www.apple.com/safari/download/plugins.html
Message was edited by:  Andy

Why does my iPad shut down when I try to open Facebook?

Why does my iPad shut down when I try to open Facebook? it just started doing this 3 days ago. I cannot get into my Facebook account on my iPad!!

Close all apps in the multi-task window and try again.
1.Double-click the Home button.
2. Swipe the app's preview up to close it.
3. Preview will fly off the screen.

Why is my computer shutting down when i try to sync with itunes

does anyone know why my computer is shutting down when i'm trying to sync my i pod. I have tried reinstaling itunes but it hasnt helped.

iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device
or maybe:
iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store

HT1338 I have Creator DVD Maker and it shuts down when I add media.

I have an imac /mountain lion I have DVD-Creator by Wondershare 3.6.2 and I shuts down when I add media.

Hi InternetHogger,
Welcome to the Apple Support Communities!
I know that situations where you cannot boot your iPad and cannot charge your iPad can be very frustrating. In this situation, I would recommend using the attached article as a reference for troubleshooting.
iOS: Not responding or does not turn on - Apple Support
Cheers,
Joe

#MULTIVALUE error when I add Text in a cell

Hi,
There is a funny error occurring in the report.
I have build this report on Excel sheet. The sheet has ONLY 4 rows,(and it always will have 4 rows).
Following is the format of the Excel sheet:
Plant    Division           Comment1           Comment2   Week
1            10                   A                        E                 4
2            10                   B                        F                 4
3            10                   C                        G                4
1            20                   D                        H                 4
In the report I have made a connection on the Excel sheet. I have made made the fields Plant,Division,Comment1 and Comment2 as Dimensions and Week as Measure.
In 4 different cells, with 4 combinations on Plant and Division, I want the following output:
- Comment1: A
- Comment2: E
When I put the formula: =([Comment1] where ([Plant]="1" and [Division]="10")) + ([Comment2] where ([Plant]="1" and [Division]="10"))
it returns Correct Results.
But when I add Text values in the formula it returns #MULTIVALUE error:
Example:        ="- Comment1: "+ ([Comment1] where ([Plant]="1" and [Division]="10"))
Where am I going wrong?
Thanks,
Amrita

Hi Amrita,
This is because when you are going only with the formula, it will provide you the value for one cell and blank for other.
But when you are going with the comments as well, you will get 4 values for this. (one for each row)
1. -Comment1:
2. -Comment1:
3. -Comment1:
4. -Comment1: A
So when you are selecting this in a single cell it will throw you #Multivalue error.
Hope it is understood.
Regards,
Subrat

In Preview, when I add text annotations to my PDF (lecture note slides), they look fine until I close it and reopen it, and then they are rotated 90 degrees. How do I fix this and keep it from happening again?

In Preview, when I add text annotations to my PDF (lecture note slides), they look fine until I close it and reopen it, and then they are rotated 90 degrees. How do I fix this and keep it from happening again?

I have the same problem with lectures slides.
Furthermore, sometimes the text box, when doube-clicking, turns the text into a one-liner. Causing the text box to sometimes get 3. times wider than the pdf itself.
tcrother wrote:
... then when it rotates the text isn't visible and I'm stuck clicking on random parts of my lecture slides hoping the text box will come back. ...
By pressing [cmd + I] the Inspector opens up and clicking on the rightmost tab 'Annotations' you should be able find those Annotations again. I do this regularly to find the empty annotations I accidentally create while clicking through slides.

Having several problems with Adobe Premiere Elements 13. Right now my worst is that when I add text to a clip, it goes out of "auto color" while the text is up. Help?

I'm having a number of problems with Elements 13. One is that, while in "play" mode, the sound will just stop happening. I have to click "pause" then "go" again and the sound comes back. It also stops playing on it's own, I have to hit "play" repeatedly. Just got the software, have been using it extensively for a week or two, and this just started happening.dor
Now today, when I add text to a clip, it drops out of "auto color" while the text is visible in the clip, then back into auto color when the text is gone. Any suggestiosn?

nikovichb
If we are looking at the same thing, you have called attention to one strange Premiere Elements 13 AutoColor/Titler interaction. This can be reproduced in the Expert or
the Quick workspace. I will demo this in the Quick workspace since that is where you have been working.
1. Import a still into the Quick workspace/Filmstrip.
2. With the still selected, go to Adjust Tab/Adjustments Palette/Color Panel expanded and just click on the Auto Color Tab. Close the Adjust Tab route.
3. Go to Text Menu/New Text/Default Text to open the project's Titler. When you do that you see the following and not the still over which the text title is to go.
And when you close the Titler, you then see the "Add Text" text title in the still.
The only solution that I can think of at this time is to create the text title and then apply the Auto Color to the still.
It is interesting that this only happens with the Auto Color in the Color Panel selected. If you do not click on
Color Panel and use the More options for Color adjustments, this behavior does not take place.
Deletion of Adobe Premiere Elements Prefs file does not correct this situation.
As for
I'm having a number of problems with Elements 13. One is that, while in "play" mode, the sound will just stop happening. I have to click "pause" then "go" again and the sound comes back. It also stops playing on it's own, I have to hit "play" repeatedly. Just got the software, have been using it extensively for a week or two, and this just started happening.dor
I think that here we need to explore project settings (project presets), properties of source media, and Timeline rendered and unrendered content prior to export.
Please review the above
a. verify if the Auto Color Text Title glitch that I saw is what you described in your situation
b. give the details of your project so that we can explore cause and effect for Timeline content playback irregularities as seen in the Edit area monitor.
Thanks.
ATR

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm work

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm working on these files? On top of this, my red arrows get moved around also.

Hi ,
Could you please update me with few details like what version of Acrobat are you using?
What OS do you work on ?
Do you experience this any particular PDF or happens with all of them?
Did you try the same with turning on the OCR ?Please check the same and compare the outputs .Does that help you in anyway ?
If the file is not confidential ,could you please share the file with us so that we can analyse it our end and revert you with the appropriate answer .
Please share the file on [email protected] and please cc [email protected] as well .
Regards
Sukrit Dhingra

Why does my Mac shut down when using Safari?

Every once in a while (randomly) my mac will reboot due to an error even when I only have the Safari Application open. How can I stop my mac from doing this. I have the 2011 macbook pro 13 inch with the latest OS (Mountain Lion). Everything is up to date but why does it keep shutting down?

Hi Sebaz, first try repairing permissions. Go to Applications-->Utilities-->select Disk Utility. Select your drive then select the First Aid button then at the bottom right click Verify Disk and after it verifies your drive click on Verify Disk Permissions on the left. If there any errors click on Repair Disk Permission. Reboot your machine and test your Safari to see if the issue comes back.

Why did my ipod shut down when it was fuly charged.

my ipod shut down when it had changed all night.

I buy a new cd yesterday. I went home to go on my computer hook up my Ipod to put new music on it. I did this all before. Usually went like a piece of cake. When I did it yesterday my Ipod after I put new music on it. My Ipod went not bright out. I didn't see it was okay to disconnected. Usually I did it will be light up. My Ipod was so dark I couldn't see the okay to disconnected. Can someone help why it's acting like that?

Why does my macbook shut down when the lid is closed?

Hi,
I have a Macbook Pro (mid-2012) running 10.9.1
Last week out of the blue, the Macbook started shutting down whenever I close the lid.
When I open the lid, the logon screen appears (as if it's been asleep as normal) but almost immediately reboots itself.
Has anyone else got the same issue? Any idea how to resolve?
Thanks

If after you open the lid you do get the login screen, almost immediately, but then it restarts your system is not shutting down when you close the lid. It is going into a sleep state but then crashes when trying to come out of that sleep state. There are quite a few posts on this problem and it seems to be caused by the system going into the Deep Sleep state also known as the hibernate mode. That is where the contents of the RAM is written to the hard drive and the system suspends supplying power to the RAM chips so the system uses even less power then in regular sleep mode.
That is only supposed to happen after the system has been in the regular sleep mode for an extended period of time.
To check the state of the huiberbnate mode open terminal and type in, or copy and paste, this command.
pmset -g | grep hibernatemode
To check the state of all power management settings use the command.
pmset -g

Why is my phone shutting down when the battery is @ 94% doing anything with it? Is the recent upgrade a chance to get us to buy and Iphone 4?

My I phone 3ga 16gb shuts down when I open any app and surf any webpage unless plugged in to the charger. I have 94% battery and as long as I don't do anything with the phone except answer it when I get a call it will stay on. I recently upgraded it to the 4.3.5 os and was wondering if that is my problem? if it is how do I get it back to an older operating system?

Highly unlikely that 4.3.5 itself is the problem as there would be millions with the same problem... there are not.
Restore your 3GS from your backup. If still a problem, restore as new, i.e. without your backup. One of those will most likely solve your problem. If not, you may have a defective battery.

Why is Site Slices pushed down when i add text?

Similar Messages

Maybe you are looking for