Why is Spice Fire One mifx1 is not detected in app manager/WebIDE for debugging?

i've an alcatel one touch fire phone as well. And it gets detected and I can connect to it via app manager/ webide by default. But this is not the case with Spice Fire One mifx1. When I connect it via USB it is not displayed in App manager or WebIDE. Please help me fix this. I've selected ADB and DevTools option in remote debugging section & disabled phone lock. Still cannot be connected..

ADB Drivers: https://www.dropbox.com/s/97j5umkfj2j2zjh/Spreadtrum-Drivers.7z
Debug Drivers: https://www.dropbox.com/s/j9a06k9elqh4qyt/SCI-android-usb-driver-jungo-v4.7z
Download and install these
Then the VERY IMPORTANT STEP:
Then you will have to tell ADB what phone to use. By that I mean adding the PCI ID to a text file to tell ADB that this peripheral is compatible.
The Spreadtrum PCI ID is 0x1782
add this line to “Your user directory/.android/adb_usb.ini”
for example
C:\Users\Peter\.android\adb_usb.ini
If the file does not exist create it.
Add this Code:
0x1782
Then the phone should work and be detected by your PC:
To test navigate to your Android SDK Directory and run: adb devices
your device should be seen .
I had the same problem and it worked for me .

Similar Messages

Spice Fire One mifx1 is not detected in app manager/WebIDE for debugging?

I tried the adb Devices command and the device shows up ! . I tried installing the Drivers Posted by Ralph Daub " https://www.dropbox.com/s/fiq4fyhx9hy.../spreadtrum-firefox.rar?dl=0 " from this given link " https://support.mozilla.org/en-US/questions/1029721#question-reply " also doesn't work need Help ! However the device shows up in Eclipse Juno

Solution by Martin_Lyngdoh is posted in the following thread:
* [https://support.mozilla.org/en-US/questions/1029721#answer-693508]
Thank you for your help, and welcome to SUMO!
- Ralph

Firefox os ni spice fire one mifx1 is not updating?

whenever i check for updates it says--
there was an error when checking for update?
i am using wifi !!

Hi mafiagang,
I understand that you receive an error message whenever you check for updates on your new Spice Fire One MI FX1 with Firefox OS inside.
I understand that this is a confusing error message, but it simply means that there are no updates available to download.
Please let us know if you have any other questions about your new Firefox OS device.
Thanks,
- Ralph

How to backup messages in Spice fire one?

I am using Spice fire one and want to reset it but I do not know how to backup my messages because it contains really important messages.

Hi abhipuru,
Unfortunately, there are no native features in your device to backup your SMS messages.
You may contact the manufacturer of your phone, Spice, and they may be able to provide you with a solution for this.
You may also be able to backup some information in your device using the application PC-Sync from the Firefox Marketplace:
* [https://marketplace.firefox.com/app/pcsync?src=search]
- Ralph

Queries about Spice Fire One FX

I'm looking ahead to buy Spice Fire one MX, one of two FIrefox OS Phones available in India. I have few questions before I continue:
1. Which version of FIrefox OS comes installed in it?
2. Will I be able to update it to V.2 when its released? (I saw a post saying Intex Cloud FX do not allow updates other than through manufacturer)
3. When will V.2 be released?
4. In case update is not possible, will I be able to flash in update for OS/change update channel to Mozilla updates?
5. Can we expect any other Firefox OS phones with better specs in near future in India? I wish to use the phone for at least two years if bought!

Hello,
1. I believe that it comes pre-loaded with version 1.3.
2. This is correct partially. The manufacturers are ultimately responsible for providing updates to its users. In the even that you know that you can flash your own device with the builds from Mozilla, you can do that.
3. I'm not sure on this, once the 2.0 version items have all been finalized, and release notes are released. You should be able to find an estimated date.
4. Answered in question 2.
5. The phones sold in the country depends on the market and what the market needs.

I am about to buy spice fire one that runs through firefox operating system. So my question is that can I make a voice call using skype through this device ?

hie myself Paras from India
I am about to buy spice fire one that runs through firefox operating system. So my question is that can I make a voice call using skype through this device ?
please mail me your answer at [email protected]
edited email address as per the [https://support.mozilla.org/en-US/kb/forum-rules-and-guidelines Forum rules and guidelines]. You should get email notifications of replies to this thread.

With firefox OS 2.0 and above you can use appear.in to make video and audio calls via webrtc

I have 2 apple ID's and one I could not access that had $15 and for some reason it made me create a new apple id, I now have $25 on both accounts. how do I take the money and put it on one account?

I have 2 apple ID's and one I could not access that had $15 and for some reason it made me create a new apple id, I now have $25 on the new account. How do I take the money and put it on one account?

You can't merge Apple IDs. What you could do is set up your phone to use the same iCloud accout you are using on your Mac. To do this, go to Settings>iCloud and turn all synced data (Contacts, Calendars, etc.) to Off. When prompted, choose to keep the data on the phone. When everything is off, scroll to the bottom and tap Delete Account. Now add the iCloud account you set up on your Mac (with the same Apple ID) and turn syncing back on for Calendars, Contacts, etc. When prompted, you will probably want to choose merge, to merge the data on your phone with the existing data on this iCloud account.

My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

You need to refresh the page (F5) to update the items in the download menu. Apparently YouTube refreshes the page in such a way that the extension doesn't gets notified, so you need to refresh the page manually if you want to download a media file from this page.

Why do I keep getting prompt to download creative cloud app manager when I already have it? I've tried re-downloading, not working.

Why do I keep getting prompt to download creative cloud app manager when I already have it? I've tried re-downloading, not working.

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Why won't Numbers update free, when my other iWork apps have update for free?

why won't Numbers update free, when my other iWork apps have update for free?

I'm not sure if this answers your question. I will update them in iTunes. Then I will connect my phone and in the phone controls I can click the "Update" button and it will change to "Will Update" but doesn't.
That's part of the problem. Once upon a time, iTunes would just automatically update apps from the computer to the phone and now it apparently requires prompting that doesn't work.

Fire X2250 / Hard disks not detected in AHCI mode

we have two Sun Fire X2250 servers. one i have completely setup already with an OS, using AHCI mode for the hard disks in the BIOS.
on the second server, i setup the disks the same way using AHCI. the system booted and detected all of the disks, and i installed an OS. now, after rebooting, the disks are not detected; the BIOS is stuck on 'detecting SATA channel 0'. if i remove the drive on SATA0, then the BIOS gets stuck on 'detecting SATA channel 1'. the BIOS isn't frozen, because i have left it waiting for several minutes, then pushed F2 and i saw it changed to "Entering setup..." i can never get to setup, though, because the disks are never detected. if i unplug both HDD's, then i can get into BIOS setup. i have tried loading failsafe as well as optimal defaults. this resets it back to IDE mode, and the disks are detected fine but, as soon as i change to AHCI mode, the BIOS can't detect the disks. again, the other X2250 is working just fine with AHCI. these servers are practically brand-new (have been sitting in storage for some time) and this is the first time they have been configured.
i also tried removing power from the server for at least 2 minutes, and i also took out the battery for well over 30+ seconds. the strange thing is, that doesn't seem to have cleared the CMOS because, as soon as the BIOS comes up, it is still stuck 'detecting SATA channel 0' whereas i would have expected it to be reset to IDE mode and detect the disk.
what's happened?

i was finally able to clear the CMOS by powering up the system with the battery removed. disks are detected fine but, as soon as i change to AHCI mode (leaving everything else as it is), the BIOS still freezes at "Auto-detecting SATA PORT 0".
i compared the BIOS settings with the working X2250 and copied them over exactly, but still the issue remains. is some piece of hardware failing?

Dv7t Quad - Windows 7 64bit - Internal HP Webcam not detected by Device Manager

New system - one re-install of Windows 7 Ultimate, 64 bit. All else is running as expected. (SimplePass is even cooperating.) Webcam is missing from the Device Manager.
I believe the onboard (internal) HP TrueVision HD Webcam worked originally (after purchase). I reinstalled the OS (fighting with SimplePass - story not worth telling). Never checked the webcam. Weeks later... The webcam is not detected and is not listed in the Device Manager. Speccy64 (freeware used to detect and monitor all sorts of system specs) does not see the webcam. Skype does not see the webcam. YouCam software does not detect the webcam. Nada, zip, zero: No webcam.
I've already "chatted" with HP, requested, and reinstalled the webcam driver. No luck, there.
BIOS is up to date (F1.A 7/20/2011). (Everything is up to date - the laptop is new and is constantly updated.)
I'm open to the obvious, that of returning to "factory rebuild", but it's a headache to avoid so soon after just getting this beast where I want it. I do have a recovery disk and assuming it has anything more than just more drivers on it, it may be useful if I could figure out how to use it.
Ideas?
Thanks in Advance!
Kind Regards,
Dragon-Fur
This question was solved.
View Solution.

There is no harm in recovering your Notebook to factory state but I highly doubt that would fix your issue.
It could be a faulty webcam module which is not been recognized. I suspect you might have to send the Notebook in for a warranty repair to get it fixed .
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Tx2510us - Fingerprint Reader Not Detected after Service Pack 1 for Windows 7 installed

Have had Windows 7 32-Bit installed and running fine since early last year.. Today Windows Update installed Service Pack 1.
Now, the fingerprint reader (AuthenTec AES1610) is not detected. Digital Persona reported the fingerprint reader isn't connected and the Device Manager shows installed and working properly.. When the computer boots, the logon screen shows not detected..
Have seen several older posts that reference a page with a fix for AuthenTec/Digital Persona, but get a 403 error when trying to access..
Hoping someone still has this info, or possibly there's a new fix to work with Service Pack 1..
Thanks
~~~~ Nothings forgotten. Nothing is ever forgotten. ~~~~

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

My internal webcam on HP EliteBook 8460w not detected in device manager and not detected by driver

Hello all...
I just bought HP EliteBook 8460w, after I installed all the program and driver I find out that the internal webcam is not working. When I have check in the device manager the webcam is not listed. Then I tried to download the newest software/driver of it, it appears a message box that mention the webcam is not detected, please enable it from the bios. Then I checked from the bios, the webcam is not listed to be enable. Afterward, I was wonder maybe the bios is not up to date. Then I updated the bios, but still after I checked, the webcam is still not listed to be enable.
So please if anyone have the same experience or might know some answer or solution for it, I would be very happy to try. Its starting to get on my nerve.
Thank you very much before....
Cheers,
Denmuh

Hi, I figured out how to get the camera working on my 8460w laptop. I am running Windows XP SP3. No guarantee this is what will fix yours, but here's what I did:
I installed these two drivers from the HP.COM site:
First -HP Universal Camera Driver
link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Second -HP High Definition (HD) Webcam Firmware
link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Control Panel - System - Harware - Device Manager
Under Imaging Devices category, look for an existing camera device line.
Uninstall this device.
Then after a few moments, Windows recognized the camera again and automatically installed it with the right drivers (since it is really just a device connected through an internal USB port).
Hope this helps you too.

1080 hdmi plays on one toshiba but not on second toshiba same model for both

I need some help I have 2 toshiba 32dt2ul1 televisions both hooked up to hdmi cable boxes and one plays 1080 no problem the other doesn't and I can not figure out why

How do you know it's not? What's happening exactly?
- Peter

Why is Spice Fire One mifx1 is not detected in app manager/WebIDE for debugging?

Similar Messages

Maybe you are looking for