Why is text bold? - See html page

Hi, thank you for reading this....
Why do you think the text is bolding on this page?
http://www.happyhealthymotherbaby.com/email/mb-mobile.html
i searched for bold and strong and found nothing. Also asked DW to clean up Word text (it was not from Word) and asked to clean up xhtml.
Still it is bolding.
Why oh why....
As you can see have attached the styling to the td tag, for inline styling
(This is a page that will be for mobile phone to read so have limited the table width to 250px)
Thanks for your kind consideration.
Warmly, Hope
ps. scope tag is showing up...why is that happening...it is necessary?

Ken...thanks so much...wow...good to know...I will do as you say and change that tag to td...great
thanks again so much
I have no idea how that th tab and the scope tags got in there...
DW adds them automatically?
OK, now i see, I had the 3ed option 'top' choosen when adding the table.
have now changed it back to the 1st option 'None'
Thanks so much...really appreciate

Similar Messages

How ias integrate with Snacktory for getting main text from an html page

Hi All,
i am new to endeca and ias, i have an requirement, need to get main text from whole html page before ias save text to Endeca_Document_Text property,
as ias save all text in page to endeca_document_text property, it is not ok for reading when show in web page, i use an third party API to filter out the main text from original page,
now i want to save these text to endeca_document_text property,
an another question,
i get zero page when doing the logic of filtering main text from original html text in ParseFilter( HTMLMetatagFilter implements ParseFilter) using Snacktory.
if only do little things, it will work fine, if do more thing, clawer fail to crawl page. any one know how to fix it.
log for clawler.
Successfully set recordstore configuration.
INFO    2013-09-03 00:56:42,743    0    com.endeca.eidi.web.Main    [main]    Reading seed URLs from: /home/oracle/oracle/endeca/IAS/3.0.0/sample/myfirstcrawl/conf/endeca.lst
INFO    2013-09-03 00:56:42,744    1    com.endeca.eidi.web.Main    [main]    Seed URLs: [http://www.liferay.com/community/forums/-/message_boards/category/]
INFO    2013-09-03 00:56:43,497    754    com.endeca.eidi.web.db.CrawlDbFactory    [main]    Initialized crawldb: com.endeca.eidi.web.db.BufferedDerbyCrawlDb
INFO    2013-09-03 00:56:43,498    755    com.endeca.eidi.web.Crawler    [main]    Using executor settings: numThreads = 100, maxThreadsPerHost=1
INFO    2013-09-03 00:56:44,163    1420    com.endeca.eidi.web.Crawler    [main]    Fetching seed URLs.
INFO    2013-09-03 00:56:46,519    3776    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:56:46,519    3776    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into HTMLMetatagFilter
INFO    2013-09-03 00:56:46,519    3776    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:56:52,889    10146    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:56:52,889    10146    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into HTMLMetatagFilter
INFO    2013-09-03 00:56:52,890    10147    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:56:59,184    16441    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:56:59,185    16442    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into HTMLMetatagFilter
INFO    2013-09-03 00:56:59,185    16442    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:57:07,057    24314    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:57:07,057    24314    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into HTMLMetatagFilter
INFO    2013-09-03 00:57:07,057    24314    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:57:07,058    24315    com.endeca.eidi.web.Crawler    [main]    Seeds complete.
INFO    2013-09-03 00:57:07,090    24347    com.endeca.eidi.web.Crawler    [main]    Starting crawler shut down
INFO    2013-09-03 00:57:07,095    24352    com.endeca.eidi.web.Crawler    [main]    Waiting for running threads to complete
INFO    2013-09-03 00:57:07,095    24352    com.endeca.eidi.web.Crawler    [main]    Progress: Level: Cumulative crawl summary (level)
INFO    2013-09-03 00:57:07,095    24352    com.endeca.eidi.web.Crawler    [main]    host-summary: www.liferay.com to depth 1
host    depth    completed    total    blocks
www.liferay.com    0    0    1    1
www.liferay.com    1    0    0    0
www.liferay.com    all    0    1    1
INFO    2013-09-03 00:57:07,096    24353    com.endeca.eidi.web.Crawler    [main]    host-summary: total crawled: 0 completed. 1 total.
INFO    2013-09-03 00:57:07,096    24353    com.endeca.eidi.web.Crawler    [main]    Shutting down CrawlDb
INFO    2013-09-03 00:57:07,160    24417    com.endeca.eidi.web.Crawler    [main]    Progress: Host: Cumulative crawl summary (host)
INFO    2013-09-03 00:57:07,162    24419    com.endeca.eidi.web.Crawler    [main]   Host: www.liferay.com: 0 fetched. 0.0 mB. 0 records. 0 redirected. 4 retried. 0 gone. 0 filtered.
INFO    2013-09-03 00:57:07,162    24419    com.endeca.eidi.web.Crawler    [main]    Progress: Perf: All (cumulative) 23.6s. 0.0 Pages/s. 0.0 kB/s. 0 fetched. 0.0 mB. 0 records. 0 redirected. 4 retried. 0 gone. 0 filtered.
INFO    2013-09-03 00:57:07,162    24419    com.endeca.eidi.web.Crawler    [main]    Crawl complete.
~/oracle/endeca
-======================================
source code for parsefilter
package com.endeca.eidi.web.parse;
import java.util.Map;
import java.util.Properties;
import org.apache.hadoop.conf.Configuration;
import org.apache.log4j.Logger;
import org.apache.nutch.metadata.Metadata;
import org.apache.nutch.parse.HTMLMetaTags;
import org.apache.nutch.parse.Parse;
import org.apache.nutch.parse.ParseData;
import org.apache.nutch.parse.ParseFilter;
import org.apache.nutch.protocol.Content;
import de.jetwick.snacktory.ArticleTextExtractor;
import de.jetwick.snacktory.JResult;
public class HTMLMetatagFilter implements ParseFilter {
    public static String METATAG_PROPERTY_NAME_PREFIX = "Endeca.Document.HTML.MetaTag.";
    public static String CONTENT_TYPE = "text/html";
    private static final Logger logger = Logger.getLogger(HTMLMetatagFilter.class);
    public Parse filter(Content content, Parse parse) throws Exception {
        logger.info("come into EndecaHtmlParser getParse");
        logger.info("come into HTMLMetatagFilter");
        //update the content with the main text in html page
        //content.setContent(HtmlExtractor.extractMainContent(content));
        parse.getData().getParseMeta().add("FILTER-HTMLMETATAG", "ACTIVE");
        ParseData parseData = parse.getData();
        if (parseData == null) return parse;
        extractText(content, parse);
        logger.info("update the content with the main text content");
        return parse;
    private void extractText(Content content, Parse parse){
        try {
            ParseData parseData = parse.getData();
            if (parseData == null) return;
             Metadata md = parseData.getParseMeta();
            ArticleTextExtractor extractor = new ArticleTextExtractor();
            String sourceHtml = new String(content.getContent());
            JResult res = extractor.extractContent(sourceHtml);
            String text = res.getText();
            md.set("Endeca_Document_Text", text);
        } catch (Exception e) {
            // TODO: handle exception
    public static void log(String msg){
        System.out.println(msg);
    public Configuration getConf() {
        return null;
    public void setConf(Configuration conf) {

but it only extracts URLs from <A> (anchor) tags. I want to be able to extract URLs from <MAP> tags as wellGee, do you think you could modify the code to check for "Map" attributes as well.
Can someone maybe point a page containing info on the HTML toolkit for me?It's called the API. Since you are using the HTMLEditorKit and an ElementIterator and an AttributeSet, I would start there.
There is no such API that says "get me all the links", so you have to do a little work on your own.
Maybe you could use a ParserCallback and every time you get a new tag you check for the "href" attribute.

CRMD_ORDER (Quotaion) - "Configuration" tab - (not able to see HTML page)

Hi Gurus
when I open a quotation through CRMD_ORDER, in th items "configuration" tab I am not able to see the HTML page. I am here at offshore. But my onsite guys are able to see that. Please let me know what causes it not be displayed.
Please help me. It is very Urgent

Dear Jitendra,
In Production Order you will find Component and Operation screen under two different icons (not tab) production Header screen.
- For Component Overview it is something like Balance or on pressing F6 you will branch to Component overview Screen.You will find it just after Hat icon
- And for Operation over view it looks like ladder or on pressing F5 you will branch directly to operation screen.you will find this icon just after Component overview Icon.

In the mail app why can't I see single page pdf attachment created by SSRS R2 on iPad with iOS 8?

We have reports that are generated using Sql Server Reporting Services 2008 R2 and are distributed to users by email as a PDF attachment. This worked fine in iOS 7 but ever since users have updated to iOS 8 the single page PDF is missing even though it has the paper clip icon indicating there is an attachment with the email. If the PDF is multiple pages then the PDF icon would appear but there seems to be a problem with the single page pdf that is embedded on the mail app in iOS 8.
We've recreated this issue creating a test report and sent it to iPads that have iOS 7, iOS 8 using different models of iPads (2, 3, 4) and the ones that have iOS 7 work fine. Only the ones that have iOS 8 have this issue. Also tried changing the format of the file to a PNG, TIFF and again the same results on the iPads with iOS 7 display it correctly. Another test we did was send the PDF to our personal email and open it on our home iPads we were not able to see the single page PDF on iOS 8. Looking at the headers of the email I can see the that the Content-Type is multipart/mixed. When the original is forwarded to oneself on the iPad the attachment is included but the Content-Type is application/ms-tnef.

Can you check your email headers, I have also noticed this for reports that are generated using Sql Server Reporting Services 2008 R2. It could to be due to the Content-ID header I believe.
As a single page attachment on iPad will try and display inline, the Content_ID header is possibly affecting this and showing a small blank square as the image instead. Although this isn't defined as inline within the Content-Disposition header and will appear as an attachment on Outlook.

Cannot see html pages LOCALLY STORED on Mac drive, using Parallels Desktop?

Using Parallels Desktop running Windows XP, I cannot use Safari 3 to view HTML files stored on my Mac - no matter how I try!
If I locate the file within Windows Explorer and I right-click and choose "Open With > Safari Web Browser" Safari will open, but it will only open a blank window and nothing loads (the Status Bar remains blank).
If I open Safari and choose "Open File..." and navigate to the file on my Mac and click "Open" I get an error message which states:
Safari can’t open the page “file://.PSF/Macintosh%20HD/..."
etc.
Note that the URL it is trying to open begins with:
“file://.PSF/"
whereas doing the same thing from within Internet Explorer shows the URL to begin with:
"\\.PSF\"
without the "file" part. Also notice the BACKslashes, rather than FORWARDslashes.
Lastly, trying to open a blank Safari window and drag-and-drop the HTML file from Windows Explorer directly into the Safari window results in exactly the same problem.
Note that ALL 3 of the above-mentioned methods DO work in Internet Explorer.
Finally, even copying-and-pasting the local URL that DOES work in IE into Safari's Address Bar doesn't work either. The problem this time is that not only does Safari turn all the backslashes into forwardslashes, but it also adds "http:" to the beginning of the URL, when it was not in the originally-copied link, which began with "\\.PSF\".

Again, thanks for taking the time to reply - but you're really really not paying attention to what I'm saying...
I AM giving Safari the full pathname, but when using Parallels Desktop, this full pathname begins with "\\.PSF\". That's how it starts. Nothing else before the two backslashes, OK. That's how it works in Internet Explorer when using Parallels Desktop. That's how it works in Windows Explorer when using Parallels Desktop.
I have given Safari the full pathname in FOUR different ways, as I mentioned in my original post: right-click, open with / file>open / drag-and-drop / copy-paste-URL.
With regards to my particular issue, I'm not concerned about how it works when using Windows running natively on a "proper" Windows PC. I am concerned about how it works when using Parallels Desktop.
If you really want to know the full URL (not that it matters one jot) of an example file that I can open with Internet Explorer, but not with Safari, here's the URL of the file I was originally trying to test:
\\.PSF\Macintosh%20HD\Work\Downie\Website\HTML\index.html
That's it. Everything is there. I have not left off anything at the beginning of that URL.
That's how it works in Internet Explorer when using Parallels Desktop. OK, re-read that. It works in Internet Explorer when using Parallels Desktop.
When I copy that URL exactly as it is, and paste it into Safari and hit return, Safari automatically converts it to:
http://.psf/Macintosh%20HD/Work/Downie/Website/HTML/index.html
Note how it has altered it in several respects:
- It has added "http:" to the beginning of the URL.
- It has turned the original "PSF" into a lower-case "psf".
- It has turned all the backslashes into forwardslashes.
I try manually deleting and altering the relevant parts and hitting return again, but Safari just goes back to the "wrong URL".
When you say "the only prefix for local files is file://" you are obviously not familiar with how Parallels Desktop works with and reads "local files".
Remember what I said earlier about how you're not REALLY looking at LOCAL files, because TRUE local files would be on the Windows section of the drive, and I am trying to look at files on the Mac part of the drive.
I'll repeat what I said earlier:
If you are not testing this from within Parallels Desktop like I am, and where I am having the problems, then your words here are not of much use, because you cannot experience what I am experiencing. You cannot comment on the experience on how this works from within Parallels Desktop if you do not have Parallels Desktop and have not experienced it yourself.

Passing values to the TEXT AREA in .HTML page.

Hi,
I have data in internal table and in context node in custom CRM component.
I want to display this data in the textarea field. Is it possible to display this data in the text area? Should we use JAVASCRIPT for this one?
Can anyone please give me the smaple code for passing the values to the text area?
Please help me.
Regards,

Hi Pushpa,
You can set the internal table values to the text area field using SET_PROPERTY method .
Check for the context node in which that text field is there ,then get that context nodes current entity .Next set required values to that text area field.
Regards
Anitha

TS2516 Why does text disappear from some of the pages? No matter what I do, to include reviewing spelling, the text will disappear in preview mode.

Why does text disappear from the pages in my iPhoto book project? When I try to buy the book, it comes up with spelling errors (which are names that the dictionary doesn't recognize), but even after clicking "ignore", the text disappears when I preview the book. Even this is inconsistent because the same words appear on other pages. There is text on other pages that disappear for no apparent reason. This has become very frustrating and time consuming.

Are you previewing using this method? http://support.apple.com/kb/PH2486
LN

How do I add to the HTML page containing an fla?

Hi,
My site has Flash Video that plays back in a Flash movie
file.
I want to put html text on the html page containing the Flash
movie so that if a viewer doesn't have Flash, they can see a plain
text link that sends them to a page with a Windows Media Player.
When I attempt to add text to the html page containing the
Flash movie, the text doesn't appear and my page changes background
color.
Where in the source code should I be adding my html text?
Please indicate the insertion point below.
Source code below or visit
http://www.ocatillopictures.com/OcatilloFrames/Animation.html
Thanks
<html xmlns="
http://www.w3.org/1999/xhtml"
xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Janos-FlashPlayer</title>
<script language="javascript">AC_FL_RunContent =
0;</script>
<script src="AC_RunActiveContent.js"
language="javascript"></script>
</head>
<body bgcolor="#100068">




<script language="javascript">
if (AC_FL_RunContent == 0) {
alert("This page requires AC_RunActiveContent.js.");
} else {
AC_FL_RunContent(
'codebase', '
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0',
'width', '700',
'height', '500',
'src', 'Janos-FlashPlayer',
'quality', 'high',
'pluginspage', '
http://www.macromedia.com/go/getflashplayer',
'align', 'middle',
'play', 'true',
'loop', 'true',
'scale', 'showall',
'wmode', 'window',
'devicefont', 'false',
'id', 'Janos-FlashPlayer',
'bgcolor', '#100068',
'name', 'Janos-FlashPlayer',
'menu', 'true',
'allowFullScreen', 'false',
'allowScriptAccess','sameDomain',
'movie', 'Janos-FlashPlayer',
'salign', ''
); //end AC code
</script>
<noscript>
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="700" height="500" id="Janos-FlashPlayer" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="movie" value="Janos-FlashPlayer.swf"
/><param name="quality" value="high" /><param
name="bgcolor" value="#100068" /> <embed
src="Janos-FlashPlayer.swf" quality="high" bgcolor="#100068"
width="700" height="500" name="Janos-FlashPlayer" align="middle"
allowScriptAccess="sameDomain" allowFullScreen="false"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
</noscript>
</body>
</html>

You have the text commented out. Remove the "" after the text and it will show.

Spotlight search HTML pages SMB mount

Hey everyone,
I have been having some trouble getting spotlight to show results for certain searches. I have several machines connected with SMB that I would love to search through. I tried to search for the string “founded in 1975” in one of these volumes (HTML pages) but I get nothing. If spotlight does not have a drive indexed can’t it just conduct a plain text search through the volume? I have a PC with the same computers mounted where right click -> search works just fine.
In the system prefs, I don’t see HTML pages listed in the Spotlight categories, is this included in Documents?

Maybe I misunderstood you. Are you wanting to search for and find the html files for the site inside the domain file or the jpg, mov, mp3 and other media files that you have added to the site?
The text for each page is located inside an xml file that has been compressed into a .gz file. These are located inside folders named "site-page-plus a bunch of letters and numbers" (one for each page of the site) and these are located inside a folder titled "domain-and some combination of letters and numbers". I don't know if spotlight can cread the contents of a .gz compressed file. That's what would have to be done.
It's highly unlikely that Spotlight will be able to index those files but miracles do happen (if you believe in miracles).
OT
Message was edited by: Old Toad

Ispeak in HTML page

Does any body know how to inbed ispeak into a HTM page?
Please point me in the right direction
Thanks

Hello, a&t2007
You have landed in iSight discussions. While your question does not appear to be about iSight, I will try to help.
To try to understand your question, I googled for "ispeak". I found widgets, training vendors, an application called "iSpeak It", and several other items that do not seem to be anything that can be imbedded in html pages.
If you mean this "ispeak"
http://www.skyy.byethost7.com/iSpeak.html
it is a widget application that you install on your Mac, not imbed in html pages.
If you are trying to find a way to embed code that will read web pages to you, Mac OS X Tiger has that capability without embedding anything in html pages.
• Open System Preferences > Universal Access > Seeing
• Click the VoiceOver "On" radio button
• Click on the "Open VoiceOver Utility..." button
• In the window that opens, click "Verbosity" if it is not already selected
• Put a check (tick) mark in the "Speak text under mouse..." box
• When you highlight text in an html page (or anywhere else), VoiceOver will speak the text for you.
If you are trying to find a way to embed code ("ispeak") that will read your web pages to other users, you might find better help from an ispeak forum or html tutorial site:
http://www.htmlcodetutorial.com/embeddedobjects/embeddedobjects.html
If I missed your point, and if you don't find better help, please try to explain what you want to do in different words when you post back.
It will also be helpful if you can specify what "ispeak" you want to use. It might be easiest to paste the URL for your "ispeak" into your response so we know which one you are trying to use.
Cheers,
Jim

Why Rich Text (HTML Only) format email introduces line breaks (paragraph marks) in the email body in html?

A sentence in rich text (change in Options, Delivery format) appears as a single sentence in browser. But when I check the page source I see that sentence has been broken in to multiple lines. Why is this done? Isn't this a bug?
When viewed in a browser or application that supports rich text this does not create any problem since the line breaks are not taken into account . But I am trying to extract the text from this html and display in a nonHTML application like notepad.
Is this done on purpose?
For eg.
In browser - Honesty is the best policy
In View HTML Source -
Honesty
Is the
best
policy.

lets start at the beginning.
There is no such thing as rich text email, unless it in internal corporate stuff like MS Exchange, Lotus notes etc. EMail on the internet is HTML or Plain Text.
I have no options > delivery format in my settings. Is this something to do with Outlook perhaps?
Then there is your image. All those MSO objects. They stand for Microsoft Office Objects and indicate the source of the HTML as being Outlook or at least Microsoft Office. All in all I think your asking about Microsoft actions on a Mozilla forum.

Why do text variables using Running Header character style translate forced returns as a word space in the running head on the first page but close up the space on subsequent pages?

In an InDesign document that requires 3 different Chapter head paragraph styles (to cope with differrent length headings) I've set up the running heads on the master page with a text variable using the Running header (character style) option. The character style I've assigned to this is an empty character style that is applied to all 3 chapter head paragraph styles.
Some chapter heads require a forced line break, so that the line breaks are aethesically pleasing. On the first page the text variable translates this forced line break as a word space in the running head, but on subsequent pages it ignores the forced line break. This means that if you have a word space before the forced line break, on the first page you get a double word space and on subsequent pages the running head sets correctly with a single word space. But if you remove the word space before the forced line break in the chapter head text, the first running head sets correctly with forced line break interpreted as a single word space, but on subsequest pages the space is closed up.
This only seems to be a problem when the character style option is used for header text variables. If a paragraph style is used the forrced line break is interpreted as a a single word space in all instances, both on the foirst page and subsequent pages.
This would appear to be a bug in how text variables are applied when using the Running header (character style) option. I can't see any other reason why the text variable would beheave differently on the first page and on subsequent pages. There is only one master page, so it isn't a case of their being an error between a main master page and a chapter opener master page.
Does anyone have any solutionss, or know if this problem has been fixed in subsequent releases of InDesign (I'm using CS6 ID version 8.0)
Thanks

Ask in the ID forum...
Mylenium

Why is the formatting missing from my html page created from a template?

Hi All!
Hope you can help me.
I've created a new template in dreamweaver - all good. When I preview the template page in a browser everything looks perfect.
But when I create a new html page from that template, even though the page looks perfect in design view, all the formatting is missing when I preview it in a browser.
The site settings were relative to the site root and I've changed that to be relative to the document (not sure if that should make a difference). Either way, it hasn't changed anything.
Any ideas?

The site settings were relative to the site root
If you have not enabled "Preview using temporary files" in your PREFERENCES then site root relative links will fail on preview. Why? Because site root relative links *always* begin with "/", and when the browser sees that, it (since it knows nothing about Dreamweaver sites) correctly looks for the path starting from the root of your hard drive, not the root of the DW site. When you enable preview using temp files, before handing the file to the browser, DW obligingly converts all root relative links to document relative links (which *will* work on preview) but to do that it must create a temporary file (there are other things that happen as well, like external files being embedded in the code for the preview, but that is not relevant to this discussion). The reason a temp file is created is so that these changes don't affect your saved file.
So, if you want to use site root relative links, and do previews of your pages, you must enable the temporary files in preview. There is really no downside to doing this except that you may occasionally see a curious file named xzys139(.html in your local file list - this is a temporary file that was handed to the browser for preview, and for whatever reason was not deleted. In fact, this can save your bacon sometimes because it gives you a 'backup' of that page to which you can revert in the event of something catastrophic.
In the larger picture, there is no benefit to using site root relative links UNLESS you are also using server-side includes. It will make your life a bit simpler if you do not use them.
Finally, having made those links in your template file with the site root relative option enabled, changing that option to document relative will only affect NEW links, not existing ones. This is why Ken asked to see the link in your template - it's because he knows that even though you have made the option change, that old link will not be affected and will therefore fail on preview (assuming you have not enabled the temp file thing).

Can't see HTML and Custom text format under data format tab in obiee.

Hi,
I want to add a java script to my report but I can't see HTML/Custom text format option under Data Format Tab--->"Treat Text as" menu.
My report is a union report.
For data column and numeric columns i can see custom option available but for text columns it is not visisble.
Any idea why it is not showing and what should be done here.
Any pointers are welcome.
Please help,it is really urgent.
Thank in advance!
Edited by: 810008 on May 18, 2011 10:03 PM

Hi,
Select text column (varchar column) -> Treat Text as -> custom text format ->Remove @ (default) -> add [html]<script>sometext(‘@’)</script> followed by your javascript
for eg:
[html]<script>buildGoogleChart(‘@’)</script> <head> <script type="text/javascript"> function show_alert() { alert("Hello! I am an alert box!"); } </script> </head> <body> <input type="button" onclick="show_alert()" value="Show alert box" /> </body> </html>
hope helps u.........
cheers,
Aravind

Flash Text not displaying in GoLive CS2 HTML page

Greetings All!
I have created some simple scrolling text in Flash Pro 8. I published the SWF into my GoLive CS2 web site. I can see everything when I open the SWF file or the accompanying HTML file, but when I place the SWF into an HTML page in GoLive, the text doesn't appear. The arrows to control the text are there, but there is no text. Has anyone else come across this? Any ideas?
Thanks!
Mike

There is something wrong with how it is accessing the text in the Flash file itself. When I downloaded the file, it gives me an error stating it cannot find the textOurStory.txt file.
You may need to change the link so the flash (embedded at a different address) can find it. Something like "new/flash/textOurStory.txt" should do it, I think (maybe an absolute path might work better http://www...)

Why is text bold? - See html page

Similar Messages

Maybe you are looking for