Why is the Application becoming very slow

I am using DSC version 7.0 and have connected about 25 tags in tag engine to PLC
and siemens drive. I also have about 15 tags connected directly through data socket.
The problem is that when I run my application it becomes very slow and sometimes the
PC also hangs. When I run this application with memory tags, there is no problem.
PC has 256MB RAM and clock speed 1.33 GHz.
please help..thanks

Please see this post:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=5065000000080000008DCE0000&USEARCHCONTEXT_CATEGORY_0=_51_%24_6_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_51_%24_6_&UCATEGORY_S=0

Similar Messages

  • After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    You can always shut it down manually via the Task Manager
    (CtrlShiftEsc)...
    On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

  • I have a macbookpro may 2010 with Intel core 2  duo processor can i upgrade to osx mountail lion ,i have doubts that the macbook becomes very slow on this processor

    macbook pro 2010 with 2.4 Ghz intel core 2 duo can i upgrade to mountaion lion ,i have doubts that it becomes very slow

    Welcome to the Support Commuities. See under Supported Models here:
    OS X Mountain Lion Technical Specifications
    ...Although your MacBook Pro is supported, it may be advisable to wait until OS X 10.8.1 or 10.8.2 in order to avoid the possibility that your Mac slows down due to bugs in 10.8.0.

  • The system become very slow when I installed FCP X

    Hi,all
    Could anybody help to solve this problem?
    MY OS X is 10.6.8, and When I installed the FCP X, it runed very slow. Each step would cost 10 sec. or even more to go over.
    I use the lastest MAC Pro (QUARD 2.8GHz, 8GB, 2TB, ATI5800), so do not worry about the perfermance.
    Moreover, how can I archive the project files and the events?
    Thanks.

    CityU_Haosen wrote:
    Moreover, how can I archive the project files and the events?
    I am not sure about your speed issues, but you can find your project and event files in User/Movies/Final Cut Events and User/Movies/Final Cut Projects from there you can duplicate folders and files to backup your events and projects. Hope this helps.

  • Data load becomes very slow

    Hi,after a migration from Version 5 to 6.5 the dataload becomes very slow.With V5 the dataload takes 1 hour, with 6.5 it takes about 3 hours.the calculation takes the same time.Any idea?

    To many sub VIs could not be found so I can not give you more than some advises. But I see that you run all your loops at full speed. I do not think it is very wise. Insert the "wait (ms)" functions in all while loops, but not the loops handling the daq functions. Since they are controlled by a occurrence. In Loops handling user input only you may set the wait time as high as 500ms. In more important loops use shorter time.
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • I have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?

    i have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • 3 year old iMac 24 running OS10.7.4.  After it has been on for a day or so, it stops going to sleep and becomes very slow.  This only happens when Safari is running. Quitting Safari solves the problem.  Has anyone else have the same problem?

    3 year old iMac 24 running OS 10.7.4.  After it has been on for a day or so, it stops going to sleep and becomes very slow.  This only happens when Safari is running. Quitting Safari solves the problem.  Has anyone else have the same problem?  Does not happen on MacBookpro only on iMac.

    Hello Albert, see how many of these you can answer...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

  • My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    Need Help Ye,
    boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

  • Why the system is very slow than before

     I have two computers, One is desktop, another is laptop,but I met the problems about the performance for the two
    computers, from last Monday, two computers speed are very slow, after I checked the task manager, I found the service(ntoskrnl.exe) used the 60-70% CPU resource, but why the ntoskrnl.exe cause this? I also download the tools and analysised it, but it seems
    that no useful information,how to find the root cause?
    summary all the information as below
    1.Suddenly this problems happened
    2. I closed the AVP (Kaspersky antivirus software), but it seems no improved for the performance
    3. I have closed the Windows search service, but no change for this
    4\I use the maxthon and Firefox browse
    , all the same thing happened.
    you can download the Log file from http://1drv.ms/WwTBhU

    Hi,
    Any update in this thread?
    http://social.technet.microsoft.com/Forums/windows/en-US/ce42930b-f0f3-4df7-a621-d8f9d59109b4/why-the-system-is-very-slow-than-before?forum=w8itpronetworking
    Regards
    Yolanda Zhu
    TechNet Community Support

  • Can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter

    can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???

    Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
    Russ

  • My iMac has suddenly become very slow to wake from "sleep." Why? How can I fix this?

    My iMac has suddenly become very slow to wake from "sleep." How do I fix this and what is causing the problem? Even the mouse wakes very slowly.

    Try these basic troubleshooting steps.
    1. Quit all app scompletely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage. 

  • Since upgradation of my i phone 4 to ios7, it has become very slow and hangs frequently.. why!!!!!

    since upgradation of my i phone 4 to ios7, it has become very slow and hangs frequently. before upgrade, we  were not aware that ios7 is not appropriate for iphone 4. more than 50% memory available ,still slow. getting slower. why?

    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • My phones centre button response has become very slow... Or rather 40% of the times it won't respond at all... Any suggestions??!

    My phones centre button response has become very slow... Or rather 40% of the times it won't respond at all... Any suggestions??!

    reboot the iphone if the problem is still there
    it's likely a hardware defect which require repair

Maybe you are looking for