Why is the assests panel disabled when editing css or xml files?
It's immensely annoying. Is there anyway to stop it?
That doesn't really explain why a very useful panel is disabled. What's the logic behind it?
This is a user-to-user forum, not Adobe customer support. You asked whether there was any way to prevent the Assets panel from being disabled when editing CSS and XML files. The answer is no.
If you want Adobe to change the way the program works, file a feature request.
Similar Messages
-
Why is the display going black when editing in FCP X?
Here's a tough one that the Genius Bar couldn't make heads or tails of:
I'm using FCP X to edit some videos, as I have for a few years now. Upon launching Final Cut Pro it loads my timelines etc as it always does, but sometime soon after (either while waiting for background tasks to run, or when click on an event) the screen goes black. I've replicated the same problem with multiple external drives, projects, etc.
And yes, I have uninstalled and reinstalled FCP X following the specific instructions on the Apple.com website. No such luck. Taking it to the Apple Store resulted in a lot of head scratching, confirmation that something is definitely wrong, and a then this Support Forum question.
Anybody heard of something as bizarre as this? I'm hoping so. Thanks.
My Gear:
MacBook Pro w Retina Display
OS X Mavericks 10.9.2
Final Cut Pro X 10.1.1
multiple external drives (Lacie, WD, etc)What do you mean by saying the screen is going black?
Do you mean the whole monitor or just the Viewer in FCP X?
Try these general troubleshooting strategies even if you've already done them.
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
2. Open Disk Utility and Repair Permissions.
3. Trash FCP X using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
If these 3 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles. -
Why is the alarm function disabled when iPhone is switched off ?
Can anyone explain why iPhone doesn't have this feature ? Most other smartphones do. Many thanks in advance for your replies.
We cannot explain why the iPhone doesn't have this function, but you should use it as wake up alarm turning on the airplane mode so nobody can bother you with calls or texts during your sleep, and when you wake up and your alarm sounds you could turn off the airplane mode.
-
Why is the photo only black in Edit mode with iPhoto 11?
Why is the photo only Black in Edit mode?
Everything works fine, except when I try to edit a photo, it shows as only Black.
I have tried every fix talked about on this forum, and some others - nothing fixes it.
Is this a Feature ? or is it a bug that no one is interesteed in fixing? It doesn't fill me with confidence in Apple when I see such random little glitches remaining unfixed.Is it the same for newly created slideshows? Although a long shot give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the above fails as a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it doesn't then the following my be your next step:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired. -
HT204053 why my apple id was disable when i try to get apps from app store
why my apple id show disable when i try to get apps from app store???
These are user-to-user forums, nobody on here will know why it's disabled. You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone then try logging out of your account on the phone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on it -
I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
the ipod is disabled, when i plug it in to my pc it says it can not connect without the passcode being put into the ipod, how do i fix it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.
c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem. -
Why is the iTunes Store crash when I start in on the iPhone 5 with the iOS 07 update?
Why is the iTunes Store crash when I start in on the iPhone 5 with the iOS 07 update?
Hi,
Do you have iTunes 11 on your imac? What OS X do you have?
Jim -
Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?
Why is the Insert Panel Missing from Dw CS6 Build 12 v 5861?
If Nancy's advice doesn't make it pop up as a window, you may have it set as a tool bar, in which case, hitting Ctrl+F2 will make the tool bar appear/disappear.
To turn it back into a floating panel, click and drag the dashed line on the far left of the Insert tool bar and pull it away from the top. You can leave it as free floating or drag it to another edge until it highlights the edge and drop it to dock it to whichever side of the screen you prefer. -
Why is the "done" button inactive when I try to downgrade my iCloud storage plan to 5GB free? Doesn't work from iOS device or macBook system preferences. I didn't sign up for a $40 plan.
I found the solution .,,,
1) click on your current plan and press done your payment details will appear .
2) the first section is your plan and there is a botton "change" click on it
3) it will take you back to the upgrade options
4) press on the downgrade options
5) choose the 5 GB and the done botton will be enabled
6) click on it you'll back to the step number 2 , here read carefully you'll see that your changes will take effect after the current plan expired with the date. -
Why is the "Import" button grey when I'm trying to transfer music from one computer to another using Home Sharing?
Hi lexipuppy,
I dont know if you have your music on your other computer was on itunes, but if it was, make sure that you signed into your itunes account on your other computer. If you are signed in then your music should show up in your library. -
Why is the word count different when I use word count from the tools menu to the number at the bottom of my mac word document
This forum is for Apple's defunct office suite 'AppleWorks' - since the word count is not in the places you mention I assume you are talking about Microsoft Word? Though it's just possible someone in this forum might also use Word and know the answer, you would stand a higher chance of getting an answer in Microsoft's own forums. You could also try asking in the forum applicable to your operating system - Lion, Mavericks or whatever - on the reasonably chance of finding someone familiar with Word.
-
Why does the iPod duplicate songs when updating my playlists?
Why does the iPod duplicate songs when updating my playlists? Also, you cannot use the "show duplicate songs" feature on the iPod - I suppose that is because it is not supposed to duplicate songs on the iPod. But, if that is the case - why does it do it?
Try resetting your iPod, press and hold the power and the home buttons together approximately 15 seconds until the Apple logo appears. If that does not work try going into Settings>General>Reset>Reset All Settings. If that does not work try connecting to you iTunes library via the cable and un-sync the library from your iPod then sync the library. For the next 2 options backup your iPod first, then do a Restore iPod from backup, if that doesn't work... As a last resort Restore your iPod as New. I too had the red circle and square after updating to 7.0.4 the last resort fixed mine, others have reported doing all the above, all have had reports of fixing the problem and not fixing it. Give it a try, hopefully one of these works, Good luck.
-
Why does the purchase verification appear when I download free app?
Why does the purchase verification appear when I download free app?
Is this what you mean...
apple_prompting_some_users_for_extra_app_store_security_details
Maybe you are looking for
-
New install no mouse or keyboard
Hi all - I seem to be having an issue where I can get the nvidia X in the middle of the screen to display, But it doesn't respond to mouse or the keyboard like the instructions says it should. What did I miss? Thanks for the help.
-
I am plotting an XY graph (X for time and Y for an amplitude). As i plot this graph the whole set of points are presented. I wish i could present the graph, reducing the X axis width(10 seconds width) and iterate to plot 10 sec to 10 sec(segments of
-
I just bought a 15in widescreen lcd monitor for my 12in powerbook g4 and it works but I can't get the screen to fill up all the way. It's hard for me to describe, it seems like it won't get any bigger than my lcd screen on my powerbook. I have change
-
I would like to know if anyone could tell me the easy way to get my old vinly records into my computer?
-
Running out of disk space - IGS Log Trace
Hello, for a few weeks we are continuously running out of disk space on our CE7.2 Application Server. The following files are increasing every second: Path: usr\sap\C72\J00\igs\log mux_sapce72.trc pw_sapce72_0.trc pw_sapce72_1.trc The entry that is w