Why is the audio on my finalized project different than when I'm editing it?

Why is the audio on my finalized project louder than the when I watch it on the editing screen? The background music doesn't turn down when I watch the final product and I cannot hear the clip, but on the small/edit screen it works perfectly.

Have you already exported it and is it there where it messes up? If you are just clicking the button that makes the video full-screen in iMovie, that's your problem. For some reason, many people have movie glitches when they do that, like the video pausing for no reason, loss of sound, and other glitches. Just export it and it will most likely work.

Similar Messages

  • HT1296 Why are the apps in my itunes app different than those displayed on my phone?

    The visual image of my iphone's apps in the itunes software shows a lot of apps that I have deleted.  How do I make itunes and my phone look the same?  I have synced them....what gives?

    Are you looking at the purchased tab? The purchased tab shows all the Apps you have ever purchased (including Apps you've uninstalled/deleted). You can ignore them and look at the Apps on your iPhone when you plug in your iTunes.
    The Apps you've deleted are still associated with your iTunes account.

  • Why are the printed image and its borders different than specified on Aperture's Print window

    Hi,
    I am trying to print an 11.98x17.97 image on a 13x19 sheet. I specify .51" borders top and bottom, and .52" right and left.
    Instead, I am getting a 7.5x10.75" printed image with L 1 1/8" + R 7 1/8" borders and T 1/8" + B 5 3/8" borders. In short, a smaller image, shoved up and left on the sheet. Please see screen shot below.
    Same happened when I tried to print a 4x6 image on an 8.5x11 sheet, until I was told by Kirby to enter the sheet size as a standard 'letter size' sheet instead of entering a custom 8.5x11" size. Is this the same? If so, what's the 'standard' size for 13"x19"?
    Something is going over my head here . HELP!
    RAPHAEL

    For the Epson 3880, I use the Paper Size "Super A3 / B 13 x 19 in (Manual — Rear)" when using Epson's 13x19" Hot Press or Cold Press paper.
    That's from my response to you on November 16th.  .
    That should allow you to print as you want.  I have a hunch about what might be happening with your current print setting, but I want to check it before speculating aloud.

  • Why is the audio outrunning the video?

    First off, I'd like to say thanks to the gentlemen who helped with my last question; you guys lead me to the information that allowed me to figure out what was wrong and how to fix it.  I now have a new problem that's making me tear my hair out, and I'm hoping you guys can help me with this one as well. 
    Background:
    I'm attempting to make a video resume to supplement my paper resume in order to get a job with a technology educator called Techshop.  I have an old video production degree, but I'm new to digital editing.  For equipment I have a reasonably powerful computer (it exceeded the specs), a Panasonic HC-V10 camera (it records in ACVHD lite 720 60p, I think), Premier Elements 10, and a file viewer and converter called Wondershare Video Converter Platinum. 
    My troubles all started when I, in my beginner's ignorance, didn't use Premier to capture the video clips off my camera directly, but instead took the SD card out and transfered the files onto my computer's hard drive directly.  I no longer have the video on the SD card, all I have is the files.  There is too much video to re-shoot; I need to use this footage. 
    I set up my project as ACVHD lite 720 60p and, again not understanding what I was doing, washed all the raw footage through the video converter.  This was to get the resolution of the video up to 1280X720 from 960X540 and to label the video instead of just having numerical codes (pre-sorting).  I was changing the resolution because I couldn't find a Premiere preset for that resolution.  I converted the audio at 48 MhZ (after initially converting at a sample rate of 44.1, which seemed to cause a problem-though in hindsight, it may not have), which is the same as my project preset.
    After converting the footage, it appeared to play perfectly in Wondershare.  I looked at the footage with MediaInfo, and it appeared to match my video presets exactly.  I used Get Media to pull the files into Premiere, and that's when it hit the fan.  The audio was outracing the video!  At the start of the clip it appeared to be in synch.  A few seconds in, and there was 'something funny going on'.  A minute in and it was badly out of synch, and a few minutes into a clip (several takes in one clip) it was so badly out of synch I couldn't even match the sections up.  The audio ended before the video in every clip I imported.  I'm not sure, but I think it's losing about 2 seconds a minute.  I also tried a test export, and the problem was exactly the same.
    Now here's the interesting wrinkle.  When I look at the Properties of the clips in Wondershare and MediaInfo, they both tell me the frame rate is 29.97 fps and the audio is sampled at 48MhZ.  However, when I look at the Properties of the same clip in Premiere, it says the audio sample rate was 48MhZ, but the frame rate is 29.00!  If I'm calculating this correctly (though I'm not certain I am), I think losing .97 frames per second accounts for the audio/video missmatch-the video is playing slightly slower than the audio.
    As an afterthought, when I Get Media the files into my Premiere project, I get a tiny message at the bottom of the screen that says Premiere is Conforming each video with a progress bar, leading me to believe that the project presets do NOT match the source video; only problem is, Wondershare and MediaInfo say it does!
    Question:
    What is happening?  How come Premiere is saying that these files have a framerate of 29.00 fps when everything else says they're 29.97?  Did I convert it oddly?  I checked, and I set the frame rate on Wondershare to 29.97 (which is what it and MediaInfo both say the video is playing at).  I even re-converted some of the video from the raw source with Wondershare at at 29.00 setting, and it STILL has the missmatch problem.  Did Premiere interpret it strangely?  If so, any idea why?  It doesn't appear to need to Render-there's no red bar above my project or anything.
    Also, is there a way I can tell Premiere to play the video back with the same audio rate, but at 29.97 fps instead of the 29.00 fps it says it's using?  Or stipulate that the video files be played at the correct rate, or something?  Or really, any other ideas on how to address this issue?  Uncoupling the video and audio and then time-stretching seems very imprecise and cumbersome, so I'd rather not try it.  I'd like to simply adjust Premiere to use the video correctly, since my video is already labeled and correctly sized (and some of it is cropped and color corrected too). 
    Edit: I just loaded in the unconverted footage for kicks, and the audio problem doesn't seem to be occuring.  Simple fix, right?  Well...I'd like to still figure out what's going on for future projects.  I also would like to still use the converted and labeled video since I took SO LONG pre-sorting it!  Lastly, I had at one point attempted to load all the unconverted footage into Premiere and just re-label there, but Premiere spat up a message that it was "running low on system resources" and soon locked up/stopped responding.  My computer doesn't seem to be able to handle 135 video clips in one project, and thus my need to pre-sort.  Just wondering, but is it the preview images that are the problem?  If I chop up the footage into multiple folders, will that help?
    I have already read the articles by Bill Hunt and others about "File format as a wrapper" and "What's in a Codec" and such-VERY informative!-so no need to point me to one of them unless I've clearly forgotten something. 
    Gentlemen, I thank you in advance for your advice and assistance, and I am very appreciative that you make your experience available to new users such as myself.  Thanks again!

    I don't know why the audio sync problem is happening but I can offer a workaround that has helped me salvage files that were not able to be reshot.  The common denominator for the audio sync problems I have encountered in (some, not all) clips were 60fps.  It has been a while since I had to do this so please bear with me as I am doing this from memory.  Also, this is based on PE10 but will probably work with older versions but I don't own any.
    1.  Right click the clip in your timeline and select "Unlink Audio and Video"
    2.  Click any other place on your timeline to de-select the problematic clip and then click on the AUDIO portion to only select it.  To confirm that you did it correctly only the audio portion of the clip will be highlighted.
    3.  Right click on the highlighted auido clip and select "Time Stretch...".  A small box will pop up with 4 adjustments - Speed, Duration, Reverse Speed and Maintain Audio Pitch.  Here is where the trial and error begins.
    4.  If I recall, I used a few different methods to determine how much to stretch the audio to get things right.
                              a) You could determine how much time there is between the audio finishing and the video finishing by subtracting the values in the timeline counter.  Remember the last two numbers are frames and not fractions of a second.  Now add that value to the "Duration" value in the second line down in the open box.  It should get you pretty close to back to normal sync. If not good enough you can tweak the duration to get it right.  Next, check the box to "Maintain Audio Pitch" or you will sound funny.  If the pitch sounds funny you could add the "PitchShifter" effect from the audio effects toolbox though I have not had to this.
                             b)  You could click into the speed % box and enter an amount up to two decimal places in value.  Based on the fact that mediainfo says the clip is 29.00 fps (for whatever reason) I would try (29.00/29.97=.9676 X 100 =) 96.76% and see what happens.  Check the ' Maintain the Audio Pitch" box as above.  If this works then it may serve as a confirmation that Elements is indeed incorrectly interpreting the clips properties.
                             c)  Run and Gun.  Just start changing duration values or Speed percentages until you get it right.  Ya know, caveman style.
    Another way that is possible I'm guessing is to click and drag the audio into sync.  Do steps 1 and 2 above.  Expand the timeline to show the waveform better.  Hover your cursor over the right side of the audio clip until the backwards "C" shows up.  Click and drag the clip to the right using the waveform as a visual reference.  I have not done it this way but in theory it should work.
    When you get everything the way you want it you can trim off the audio portion that overruns the video to make them the same physical size.  Then hold the shift key down while selecting both the audio and video portions of the clip.  Be sure they are both highlighted.  Right click on the clips and select "Link Audio and Video" to relink the clips. 
    Hope this helps you.  It is not ideal by any standard but what workaround ever is.  Good luck.

  • AUDIO VOLUME ON FINALIZED PROJECT

    AUDIO VOLUME ON FINALIZED PROJECT:
    I made a standard iMovie project with the original soundtrack from the video mixed with some music tracks.  I had the music volume go down during the speaking parts.
    To my surprise, on the finalized version, the background music drowns out all dialogue when viewed in full screen!  And yet, when this same version is viewed on the iMovie working window the volumes remain correct, as originally intended.
    Any suggestions on fixing the sound mixing on the finalized version? Thanks!
    Victor

    After posting i was suggested a link to this thread - More like this
    https://discussions.apple.com/message/15504838#15504838
    I switched ducking on, then off, audio came back.
    Problem seems to be sorted

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Why is the audio on my video getting out of sync when it is imported into itunes?

    Hello,
    I have videos in the MP4 Format, and have imported them into itunes. However, during playback in itunes, the audio gets more and more out of sync as the video plays. By the end of the film the audio can be 5-6 seconds out!
    What's strange is that the source file, played with quicktime or Windows media player, is fine and works perfectly.
    Why is the audio stretched once it is imported?
    Thanks,
    James

    I have the same problem.
    Motherboard: Gigabyte GA-MA785GPMT-UD2H
    Chipset:
    North Bridge: AMD 785G
    South Bridge: AMD SB710
    Video: Integrated ATI Radeon HD 4200
    HDMI Audio through the HDMI port out to the TV.
    Tried on Windows 7 Pro 32bit and Windows 8.1 Pro 64bit.
    Tried with the integrated ALC889A audio device enabled and disabled (It seems that the video card drives the HDMI audio device though, because it still appears in Windows even if I disable the Audio device in BIOS).
    Latest iTunes and drivers installed.
    I have already tried all sugestions about matching Windows Audio settings to iTunes settings (bit depth, frequency rate).
    Apple, any suggestions? I'm not having a great customer experience after buying a pair of HD movies in iTunes.

  • Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

    Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

    Oh, PLEASE IGNORE the line:
    deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
    That was left there inadvertedly. Can't seem to find the edit button here...

  • Why is the iTunes shop in Australia more expensive than the rest of the world?

    Why is the iTunes shop in Australia more expensive than the rest of the world?

    How do you know that there is not parity?
    Do you know Apples expenses in each country?
    Apple has to sell the music for the price that they can negotiate with the owners of the distribution rights in each country.
    Perhaps those who own the rights to distribute the music in Australia simply negotiated a higher price.

  • I loaded a lot of music from my CDs on to my iMac at home.  All my music is stored on the cloud.  So why is the music on my MacBook Pro different.  The CDs are missing from this list.

    I loaded a lot of music from my CDs on to my iMac at home.  All my music is stored on the cloud.  So why is the music on my MacBook Pro different.  The CDs are missing from this list. The iTunes account details I use on both computers is the same.

    Hi Chris,
    Thanks for the reply.
    I think you ave sorted my problem with your question.  I thought that as my iTunes account was on their server (Cloud) and I had previously added CDs which showed up, that all my music was "on the cloud".  I used to use Match but when I turned it off lost all my music that I had previously loaded onto my computer.
    So I guess I have to use the cloud again to access my songs.  This is frustrating as I fly a lot and can not use the music (Cloud based) when the phone is in flight mode as there is no internet.
    So how then do I retrieve all my music to my iMac and have my laptop synced so they are the same?
    I am totally confused now.

  • Why is the brightness of my iMac become 100% automatically when I turn on..

    Why is the brightness of my iMac become 100% automatically when I turn on my computer even though I set the brightness to the lowest before I shut it down.
    I want to set the brightness to the lowest every time I turn on the computer automatically.
    Is there anything I can do?

    Hi,
    There seems to be a serious issue with screen brightness on the 24" iMac. About 6 days ago I bought a 24" iMac (2.66 Mhz model w/4 GB RAM + 640HD).
    Out of the box it had Leopard 10.5.5 installed; there were several problems.
    1. Screen brightness was way too BRIGHT. Display preferences would not pull brightness down. At least not down far enough so that the screen could be viewed without extreme discomfort. Plus add insult to injury a reboot would reset the preferences to maximum brightness. NOTE: An upgrade to 10.6.1 did NOT fix the issue.
    2. Viewing a browser page via either Safari or Firefox (latest versions of each) was not good. A vertical scrolling would be jumpy and appear pixelated. Upgrade to 10.6.1 seemed to fix most of the issue in Safari, but Firefox was still not working properly. The issue appeared like a horizontal "ripple" in about the bottom 2/3 of the browser window. The effect did NOT extend outside of browser window. Changing screen resolutions did not work.
    3. Connecting a USB Logitech head set caused issues with Sound preferences.
    If the head set was connected during startup the machine would recognize them as main sound. The internals speakers did NOT appear in the Sound preferences. as an optional choice. Removing USB headset and reboot would return the internal speakers to the Sound preferences. Plugging in headseat would work for a while. We could repeat and same problem would occur.
    These are all in 10.6.1 - definate bugs.
    Returned with the iMac to the Apple store. Bottom line, after nearly three hours; the Apple technician, and everyone could see what we were talking about.
    Regarding the screen brightness. Nothing they could do about it. They stated that "not too many people have complained about it, to their knowledge." They stated that the electronics in the "florescent" panel could not be turned down the same way. TRANSLATION: The programers at Apple let this one slip past them. As a customer (software programmer & network analyst) I expected a bit more of an intelligent answer.
    However.
    Examining the 20" model I noticed that we could turn down the screen brightness - at least to a level that my wife and I could live with. PLUS the settings remained after a restart. Something that was NOT happening with the 24" model.
    So - we exchanged the 24" for a 20". Frankly we are a LOT happier. The Safari/Firefox issue is still carried over to the 20". However it is not nearly so noticable on the smaller screen.
    Plus the USB headset did not cause the same Sound Preference issues.
    So - Thanks for the speedy return/exchange of the iMac. But someone needs to look at this from the programming side of things.

  • Why does the name change to my dad's name when I use his credit card for downloads?

    I have an iPod touch. I have my own apple ID and icloud account. Why does the name change to my dad's name when I use his credit card for downloads? Is there a way I can have my own account and use my dad's card without having his name on my photostream and icloud?
    I went on icloud.com and changed my name but it changes the credit card name to mine as well so I can't get apps unless its under his name, but it confuses everyone i share photo streams with, as there are two of my dads?
    My aunt is having the same problem with her photostream, so I know its not only me.

    I have this problem and it's annoying.  Plenty of people in this world do not pay for their own stuff!.  So i have 5 kids.  All there accounts show as my name when people add them for Photo streams etc etc.  This is ridiculous.  Why not seperate billing address / credit card details to the name of the person on the account?  Why do they have to be the same?

  • Why is the message app popping up on my mac when everything has been disabled on my iphone and mac, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!

    Why is the message app popping up on my mac when everything has been disabled on my iphone and mac as per the instructions all over this forum, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!
    Have disabled in Messages > preferences on the Mac
    imessage is disabled on my iphone
    Same goes for Safari which pops up on the mac when I open it on my iphone, how can I disable it all?

    Thanks but have signed out, disabled and nothing.
    It's Yosemite not Mavericks.
    What it won't let me do is delete the account as the - button is greyed
    out.
    It won't let me delete the app from the OS
    On Monday, February 2, 2015, Apple Support Communities Updates <

  • Why does the ipod touch in italy cost 329 euro when it should cost 234 euro?? its such a rip off in italy!

    Why does the ipod touch cost 329 euro in italy when it should cost 234?

    Why do you think it should cost exactly the same everywhere?
    Almost no product cost exactly the same everywhere.

  • Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer? I can't find Mavericks icon on the dashboard or launchpad either! Help!

    Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer?
    I can't find Mavericks icon on the dashboard or launchpad either! Help!

    It sounds like you've installed Mavericks.  You can confirm this by clicking on the Apple located at the top left of the screen and choosing "About This Mac" from the menu.  You should see a window appear with the text "Version 10.9.1" near the middle.
    If it says "Version 10.9.1", then you've installed Mavericks.  It still says "Download" in the App Store because you can still download the operating system after installing it.  This is useful if you want to download it for a friend, or create a USB boot drive.
    Morgan

Maybe you are looking for