Why is the body/content of all my emails invisible except for a few lines in the small preview pane?
The body/content of my emails is invisible in the large/main part of the screen when using the mail app on my iPad. I can see some of the text from each email in the small preview pane on the left side of the screen (when holding iPad in landscape orientation). The only way I can read the content of an email is to forward or reply and then the body/content appears. How do I fix this problem??
Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
To avoid the attachment for the body content while sending email from ABAP
SAP Version : 4.7
When i tried to send an external email from the abap report program, the body content of the mail is coming as an attachment for the same. I need to avoid this. Please give the suggestion. Am attaching the code.
DECLARATION PART *
TYPE-POOLS : SLIS.
TABLES : VBAK.
DECLARATION FOR ALV.
DATA : F_FIELD TYPE SLIS_T_FIELDCAT_ALV,
W_FIELD TYPE SLIS_FIELDCAT_ALV,
L_HEADER TYPE SLIS_T_LISTHEADER,
W_HEADER TYPE SLIS_LISTHEADER,
W_LAYOUT TYPE SLIS_LAYOUT_ALV,
t_sort type slis_t_sortinfo_alv,
w_sort type slis_sortinfo_alv.
TYPES : BEGIN OF T_VBAK,
VBELN LIKE VBAK-VBELN,
VKGRP LIKE VBAK-VKGRP,
KUNNR LIKE VBAK-KUNNR,
ERDAT LIKE VBAK-ERDAT,
VTWEG LIKE VBAK-VTWEG,
LIFSK LIKE VBAK-LIFSK,
VKBUR LIKE VBAK-VKBUR,
END OF T_VBAK.
TYPES : BEGIN OF T_VBAP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
MATNR LIKE VBAP-MATNR,
WERKS LIKE VBAP-WERKS,
ARKTX LIKE VBAP-ARKTX,
KWMENG LIKE VBAP-KWMENG,
CUOBJ LIKE VBAP-CUOBJ,
NETWR LIKE VBAP-NETWR,
ZSCHL_K LIKE VBAP-ZSCHL_K,
KONDM LIKE VBAP-KONDM,
ZZURWN LIKE VBAP-ZZURWN,
END OF T_VBAP.
TYPES : BEGIN OF T_LIPS,
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
VGBEL LIKE LIPS-VGBEL,
VGPOS LIKE LIPS-VGPOS,
END OF T_LIPS.
TYPES : BEGIN OF T_KNA1,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
ADRNR LIKE KNA1-ADRNR,
END OF T_KNA1.
TYPES : BEGIN OF T_VBKD,
VBELN LIKE VBKD-VBELN,
POSNR LIKE VBKD-POSNR,
BSTKD LIKE VBKD-BSTKD,
BSTDK LIKE VBKD-BSTDK,
KURSK LIKE VBKD-KURSK, " CURRENCY CHECK
BZIRK LIKE VBKD-BZIRK, " SALES DISTRICT
KDGRP LIKE VBKD-KDGRP,
IHREZ LIKE VBKD-IHREZ,
END OF T_VBKD.
TYPES : BEGIN OF T_LIKP,
VBELN LIKE LIKP-VBELN,
ERDAT LIKE LIKP-ERDAT,
END OF T_LIKP.
TYPES : BEGIN OF T_ADR6,
ADDRNUMBER LIKE ADR6-ADDRNUMBER,
SMTP_ADDR LIKE ADR6-SMTP_ADDR,
END OF T_ADR6.
DATA : BEGIN OF IT_CUST OCCURS 0,
KUNNR LIKE VBAK-KUNNR,
END OF IT_CUST.
TYPES : BEGIN OF T_VBUP,
VBELN LIKE VBUP-VBELN,
POSNR LIKE VBUP-POSNR,
KOSTA LIKE VBUP-KOSTA,
WBSTA LIKE VBUP-WBSTA,
END OF T_VBUP.
TYPES : BEGIN OF T_TVLST,
LIFSP LIKE TVLST-LIFSP,
VTEXT LIKE TVLST-VTEXT,
END OF T_TVLST.
TYPES : BEGIN OF T_CONFIG.
INCLUDE STRUCTURE CONF_OUT.
TYPES : END OF T_CONFIG.
DATA : TMP LIKE VBAK-KUNNR.
DATA : NAME_TEXT LIKE THEAD-TDNAME.
DATA : TLINE1 LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : TMP_BRAKET LIKE CONF_OUT-ATWRT,
TMP_BRAKET1 LIKE CONF_OUT-ATWRT.
DATA : BEGIN OF IT_FINAL OCCURS 0,
WERKS LIKE VBAP-WERKS,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
KUNNR LIKE VBAK-KUNNR,
NAME1 LIKE KNA1-NAME1,
VBELN1 LIKE LIKP-VBELN,
ERDAT LIKE LIKP-ERDAT,
LIFSK LIKE VBAK-LIFSK,
ZZURWN LIKE VBAP-ZZURWN,
IHREZ LIKE VBKD-IHREZ,
ERDAT1 LIKE VBAK-ERDAT,
NETWR(25) type C,
BSTKD LIKE VBKD-BSTKD,
BSTDK LIKE VBKD-BSTDK,
SALORD(17) TYPE C,
PUMP_TYPE LIKE CONF_OUT-ATWRT,
PUMP_SIZE LIKE CONF_OUT-ATWRT,
VTEXT LIKE TVLST-VTEXT,
KWMENG(25) TYPE C,
FOOTER(330) TYPE C,
ITMTXT(330) TYPE C,
END OF IT_FINAL.
DATA : IT_VBAK TYPE STANDARD TABLE OF T_VBAK,
IT_VBAP TYPE STANDARD TABLE OF T_VBAP,
IT_VBKD TYPE STANDARD TABLE OF T_VBKD,
IT_LIKP TYPE STANDARD TABLE OF T_LIKP,
IT_LIPS TYPE STANDARD TABLE OF T_LIPS,
IT_VBUP TYPE STANDARD TABLE OF T_VBUP,
IT_KNA1 TYPE STANDARD TABLE OF T_KNA1,
IT_ADR6 TYPE STANDARD TABLE OF T_ADR6,
IT_FINAL1 LIKE IT_FINAL OCCURS 0 with header line,
IT_TVLST TYPE STANDARD TABLE OF T_TVLST,
IT_CONFIG TYPE STANDARD TABLE OF T_CONFIG,
W_VBAK TYPE T_VBAK,
W_VBAP TYPE T_VBAP,
W_VBKD TYPE T_VBKD,
W_LIKP TYPE T_LIKP,
W_ADR6 TYPE T_ADR6,
W_LIPS TYPE T_LIPS,
W_VBUP TYPE T_VBUP,
W_KNA1 TYPE T_KNA1,
W_TVLST TYPE T_TVLST,
W_CONFIG TYPE T_CONFIG.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
SELECTION-CRITERIA *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : R2 RADIOBUTTON GROUP G1 USER-COMMAND radio DEFAULT 'X',
R1 RADIOBUTTON GROUP G1 .
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
PARAMETERS : P_VTWEG LIKE W_VBAK-VTWEG ,
P_WERKS LIKE W_VBAP-WERKS.
select-options : s_vkgrp for w_vbak-vkgrp,
s_ERDAT for w_LIKP-ERDAT.
selection-screen end of block b2.
Initialization
INITIALIZATION.
s_vkgrp-sign = 'I'.
s_vkgrp-option = 'BT'.
s_vkgrp-low = '313'.
s_vkgrp-high = '324'.
APPEND s_vkgrp.
s_erdat-sign = 'I'.
s_erdat-option = 'BT'.
s_erdat-low = '20080108'.
s_erdat-high = '20080108'.
s_erdat-low = '20070101'.
s_erdat-high = sy-datum.
APPEND s_erdat.
selection-screen validations
AT SELECTION-SCREEN.
Validation for Plant.
IF p_werks NE '7210'.
MESSAGE : 'Plant entered should be 7210' TYPE 'E'.
ENDIF.
START OF SELECTION *
start-of-selection.
GETTING THE DATA FROM THE DATABASE TABLE
PERFORM DATA_FETCH.
FILLING THE FINAL INTERNAL TABLE
PERFORM FILL_FINAL.
GETTING THE LIST FOR SENDING MAIL OR DISPLAY.
IF R1 = 'X'.
Populate table with details to be entered into .xls file
LOOP AT IT_CUST.
PERFORM build_xls_data_table using it_cust-kunnr.
ENDLOOP.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
ELSEIF R2 = 'X'.
PERFORM LIST_DISPLAY.
ENDIF.
END OF SELECTION *
end-of-selection.
*& Form DATA_FETCH
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT VBELN
VKGRP
KUNNR
ERDAT
VTWEG
LIFSK
VKBUR
INTO TABLE IT_VBAK
FROM VBAK
WHERE VTWEG = P_VTWEG
AND VKGRP IN S_VKGRP
AND LIFSK NE ''.
IF IT_VBAK[] IS NOT INITIAL.
SELECT LIFSP
VTEXT
INTO TABLE IT_TVLST
FROM TVLST
FOR ALL ENTRIES IN IT_VBAK
WHERE LIFSP = IT_VBAK-LIFSK
AND SPRAS = 'EN'.
SELECT VBELN
POSNR
MATNR
WERKS
ARKTX
KWMENG
CUOBJ
NETWR
ZSCHL_K
KONDM
ZZURWN
INTO TABLE IT_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN
AND WERKS = P_WERKS.
SELECT KUNNR
NAME1
ADRNR
INTO TABLE IT_KNA1
FROM KNA1
FOR ALL ENTRIES IN IT_VBAK
WHERE KUNNR = IT_VBAK-KUNNR.
SELECT VBELN
POSNR
BSTKD
BSTDK
KURSK
BZIRK
KDGRP
INTO TABLE IT_VBKD
FROM VBKD
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAP[] IS NOT INITIAL.
SELECT VBELN
POSNR
VGBEL
VGPOS
INTO TABLE IT_LIPS
FROM LIPS
FOR ALL ENTRIES IN IT_VBAP
WHERE VGBEL = IT_VBAP-VBELN
AND VGPOS = IT_VBAP-POSNR.
ENDIF.
IF IT_LIPS[] IS NOT INITIAL.
SELECT VBELN
ERDAT
INTO TABLE IT_LIKP
FROM LIKP
FOR ALL ENTRIES IN IT_LIPS
WHERE VBELN = IT_LIPS-VBELN
AND ERDAT IN S_ERDAT.
SELECT VBELN
POSNR
KOSTA
WBSTA
INTO TABLE IT_VBUP
FROM VBUP
FOR ALL ENTRIES IN IT_LIPS
WHERE VBELN = IT_LIPS-VBELN
AND POSNR = IT_LIPS-POSNR
AND KOSTA EQ 'C'
AND WBSTA NE 'C'.
ENDIF.
IF IT_KNA1[] IS NOT INITIAL.
SELECT ADDRNUMBER
SMTP_ADDR
INTO TABLE IT_ADR6
FROM ADR6
FOR ALL ENTRIES IN IT_KNA1
WHERE ADDRNUMBER = IT_KNA1-ADRNR.
ENDIF.
ENDFORM. " DATA_FETCH
*& Form LIST_DISPLAY
text
--> p1 text
<-- p2 text
FORM LIST_DISPLAY .
REFRESH F_FIELD.
IF R2 = 'X'.
W_FIELD-col_pos = 1.
W_FIELD-fieldname = 'WERKS'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Plant'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 2.
W_FIELD-fieldname = 'VBELN'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Sales Order'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 3.
W_FIELD-fieldname = 'KUNNR'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer Code'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 4.
W_FIELD-fieldname = 'NAME1'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer Name'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 5.
W_FIELD-fieldname = 'VBELN1'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Number'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 6.
W_FIELD-fieldname = 'ERDAT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Date'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 7.
W_FIELD-fieldname = 'LIFSK'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Block'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 8.
W_FIELD-fieldname = 'PUMP_TYPE'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Pump Type'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 9.
W_FIELD-fieldname = 'PUMP_SIZE'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_l = 'Pump Size'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 10.
W_FIELD-fieldname = 'ZZURWN'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Pump Srno'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 11.
W_FIELD-fieldname = 'IHREZ'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Indent No.'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 12.
W_FIELD-fieldname = 'ERDAT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Order Booking Dt'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 13.
W_FIELD-fieldname = 'NETWR'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C710'.
W_FIELD-seltext_m = 'Net Value'.
w_field-do_sum = 'X'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 14.
W_FIELD-fieldname = 'KWMENG'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C710'.
W_FIELD-seltext_m = 'Qty'.
w_field-do_sum = 'X'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 15.
W_FIELD-fieldname = 'BSTKD'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer PONO'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 16.
W_FIELD-fieldname = 'BSTDK'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer PODT'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 17.
W_FIELD-fieldname = 'SALORD'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Sales Order/Item'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 18.
W_FIELD-fieldname = 'VTEXT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Block Desc.'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 19.
W_FIELD-fieldname = 'FOOTER'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Footer Text'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 20.
W_FIELD-fieldname = 'ITMTXT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Item Text'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
PERFORM SORT_FIELD.
PERFORM LAYOUT_DISPLAY.
PERFORM GRID_DISPLAY.
ENDIF.
ENDFORM. " LIST_DISPLAY
*& Form FILL_FINAL
text
--> p1 text
<-- p2 text
FORM FILL_FINAL .
REFRESH IT_FINAL.
LOOP AT IT_VBUP INTO W_VBUP.
READ TABLE IT_LIPS INTO W_LIPS WITH KEY VBELN = W_VBUP-VBELN POSNR = W_VBUP-POSNR.
READ TABLE IT_LIKP INTO W_LIKP WITH KEY VBELN = W_LIPS-VBELN.
IF SY-SUBRC EQ 0.
READ TABLE IT_VBAP INTO W_VBAP WITH KEY VBELN = W_LIPS-VGBEL POSNR = W_LIPS-VGPOS.
READ TABLE IT_VBAK INTO W_VBAK WITH KEY VBELN = W_VBAP-VBELN.
READ TABLE IT_VBKD INTO W_VBKD WITH KEY VBELN = W_VBAK-VBELN.
READ TABLE IT_KNA1 INTO W_KNA1 WITH KEY KUNNR = W_VBAK-KUNNR.
READ TABLE IT_TVLST INTO W_TVLST WITH KEY LIFSP = W_VBAK-LIFSK.
IT_FINAL-WERKS = W_VBAP-WERKS.
IT_FINAL-VBELN = W_VBAP-VBELN.
IT_FINAL-KUNNR = W_VBAK-KUNNR.
IT_FINAL-NAME1 = W_KNA1-NAME1.
IT_FINAL-VBELN1 = W_LIKP-VBELN.
IT_FINAL-ERDAT = W_LIKP-ERDAT.
IT_FINAL-LIFSK = W_VBAK-LIFSK.
IT_FINAL-ZZURWN = W_VBAP-ZZURWN.
IT_FINAL-IHREZ = W_VBKD-IHREZ.
IT_FINAL-ERDAT1 = W_VBAK-ERDAT.
IT_FINAL-NETWR = W_VBAP-NETWR.
IT_FINAL-BSTKD = W_VBKD-BSTKD.
IT_FINAL-BSTDK = W_VBKD-BSTDK.
IT_FINAL-POSNR = W_VBAP-POSNR.
IT_FINAL-VTEXT = W_TVLST-VTEXT.
IT_FINAL-KWMENG = W_VBAP-KWMENG.
CONCATENATE W_VBAP-VBELN W_VBAP-POSNR INTO IT_FINAL-SALORD SEPARATED BY '/'.
IF W_VBAP-CUOBJ NE '000000000000000000'.
REFRESH IT_CONFIG.
CALL FUNCTION 'VC_I_GET_CONFIGURATION'
EXPORTING
INSTANCE = W_VBAP-CUOBJ
LANGUAGE = SY-LANGU
TABLES
CONFIGURATION = IT_CONFIG
EXCEPTIONS
INSTANCE_NOT_FOUND = 1
INTERNAL_ERROR = 2
NO_CLASS_ALLOCATION = 3
INSTANCE_NOT_VALID = 4
OTHERS = 5.
IF SY-SUBRC = 0.
READ TABLE IT_CONFIG INTO W_CONFIG WITH KEY ATNAM = 'IN_PUMP_TYPE'.
IT_FINAL-PUMP_TYPE = W_CONFIG-ATWRT.
CLEAR W_CONFIG.
READ TABLE IT_CONFIG INTO W_CONFIG WITH KEY ATNAM = 'IN_PUMP_SIZE' .
IT_FINAL-PUMP_SIZE = W_CONFIG-ATWRT.
CLEAR W_CONFIG.
ENDIF.
ENDIF.
move w_vbap-vbeln to name_text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'ZKT1'
language = 'E'
name = name_text
object = 'VBBK'
TABLES
lines = tline1
EXCEPTIONS
OTHERS = 8.
LOOP AT TLINE1.
CONCATENATE IT_FINAL-FOOTER TLINE1-TDLINE+0(65) INTO IT_FINAL-FOOTER.
CLEAR : TLINE1.
ENDLOOP.
clear : name_text,tline1[].
concatenate w_vbap-vbeln w_vbap-posnr into name_text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'ZKT3'
language = 'E'
name = name_text
object = 'VBBP'
TABLES
lines = tline1
EXCEPTIONS
OTHERS = 8.
LOOP AT TLINE1.
CONCATENATE IT_FINAL-ITMTXT TLINE1-TDLINE+0(65) INTO IT_FINAL-ITMTXT.
CLEAR : TLINE1.
ENDLOOP.
APPEND IT_FINAL.
ENDIF.
CLEAR : IT_FINAL,W_VBAP,W_VBKD,W_VBUP,W_LIPS,W_LIKP,W_KNA1,W_VBAK,W_TVLST,name_text,tline1[].
ENDLOOP.
IT_FINAL1[] = IT_FINAL[].
SORT IT_FINAL1 BY KUNNR.
LOOP AT IT_FINAL1.
IF TMP NE IT_FINAL1-KUNNR.
IT_CUST-KUNNR = IT_FINAL1-KUNNR.
APPEND IT_CUST.
clear : tmp,it_cust.
TMP = IT_FINAL1-KUNNR.
ENDIF.
CLEAR : IT_FINAL1.
ENDLOOP.
ENDFORM. " FILL_FINAL
*& Form LAYOUT_DISPLAY
text
--> p1 text
<-- p2 text
FORM LAYOUT_DISPLAY .
W_LAYOUT-colwidth_optimize = 'X'.
ENDFORM. " LAYOUT_DISPLAY
*& Form GRID_DISPLAY
text
--> p1 text
<-- p2 text
FORM GRID_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = W_LAYOUT
IT_FIELDCAT = F_FIELD
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = T_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY
*& Form SORT_FIELD
text
--> p1 text
<-- p2 text
FORM SORT_FIELD .
w_sort-spos = 1.
w_sort-fieldname = 'KUNNR'.
w_sort-up = 'X'.
append w_sort to t_sort.
clear w_sort.
w_sort-spos = 2.
w_sort-fieldname = 'VBELN'.
w_sort-up = 'X'.
append w_sort to t_sort.
clear w_sort.
ENDFORM. " SORT_FIELD
*& Form TOP_OF_PAGE
text
FORM top_of_page.
IF R2 = 'X'.
REFRESH l_header.
w_header-typ = 'S'.
w_header-key = 'Delivery Block : '.
w_header-info = 'Outbound delivery created but not despatched'.
APPEND w_header TO l_header.
CLEAR w_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_header.
ENDIF.
ENDFORM. "TOP_OF_PAGE
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table using custcode.
CONSTANTS: con_cret TYPE X VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
data : it_custcode like vbak-kunnr.
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
clear : it_attach,it_attach[].
CONCATENATE 'Customer PONO' 'Customer PODT' 'Sales Order No' 'Item No'
'Pump Type' 'Pump Size' 'Order Value Rs' 'Delivery No.' 'Delivery Dt.'
'Quantity' 'Reasons for not getting Despatch'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
it_custcode = custcode.
CLEAR : W_KNA1,W_ADR6. "Code need to be added once testing is over.
READ TABLE IT_KNA1 INTO W_KNA1 WITH KEY KUNNR = IT_CUSTCODE.
READ TABLE IT_ADR6 INTO W_ADR6 WITH KEY ADDRNUMBER = W_KNA1-ADRNR.
P_EMAIL = W_ADR6-SMTP_ADDR.
LOOP AT it_final where kunnr = it_custcode.
CONCATENATE
IT_FINAL-BSTKD
IT_FINAL-BSTDK
IT_FINAL-VBELN
IT_FINAL-POSNR
IT_FINAL-PUMP_TYPE
IT_FINAL-PUMP_SIZE
IT_FINAL-NETWR
IT_FINAL-VBELN1
IT_FINAL-ERDAT
IT_FINAL-KWMENG
IT_FINAL-VTEXT
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
clear it_final.
ENDLOOP.
if R1 = 'X'.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'AWAITING DESPATCH CLEARANCE'
'XLS'
'Delivery_Block'
'Delivery_Blk'
'[email protected]'
'INT'
changing gd_error
gd_reciever.
endif.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR : w_doc_data,w_cnt.
DESCRIBE TABLE it_attach LINES w_cnt.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
object_header = objhead
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'We have manufactured the pump/s against your purchase order and regret to inform'.
APPEND it_message.
it_message = 'you that same cannot be despatched for the reason/s indicated below.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'Please find the below attachment "Delivery_Blk.xls" for the details.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'We now request you to send the required detail/s by return mail/post to enable us '.
APPEND it_message.
it_message = 'to despatch the pump/s at the earliest.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'Best Regards'.
APPEND it_message.
it_message = 'O.E. ENGINEER'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODYHi,
Refer to the following piece of code. This is the simple code to send email with content and attachment.
Declaration
DATA: lwa_hd_change TYPE sood1,
lt_objcont TYPE STANDARD TABLE OF soli,
lwa_objcont TYPE soli,
lt_receivers TYPE STANDARD TABLE OF soos1,
lwa_receivers TYPE soos1 ,
lt_att_cont TYPE STANDARD TABLE OF soli,
lwa_att_cont TYPE soli,
lt_packing TYPE STANDARD TABLE OF soxpl,
lwa_packing TYPE soxpl,
lf_sent TYPE sonv-flag,
lf_size TYPE i.
CONSTANTS: lc_obj(11) TYPE c VALUE 'BOMSouthco',
lc_desc(20) TYPE c VALUE 'BOM Download',
lc_lang(1) TYPE c VALUE 'E',
lc_raw(3) TYPE c VALUE 'RAW',
lc_net(1) TYPE c VALUE 'U',
lc_mail(4) TYPE c VALUE 'MAIL',
lc_xls(3) TYPE c VALUE 'XLS',
lc_ext(3) TYPE c VALUE 'EXT'.
Passing values to the strutures used in SO_OBJECT_SEND function module
lwa_hd_change-objla = lc_lang.
lwa_hd_change-objnam = lc_obj.
lwa_hd_change-objdes = lc_desc.
lwa_hd_change-objlen = 255.
lwa_objcont-line = text-t29.
APPEND lwa_objcont TO lt_objcont.
CLEAR lwa_objcont.
lwa_receivers-recextnam = text-t31.
lwa_receivers-recesc = lc_net.
lwa_receivers-sndart = lc_mail.
lwa_receivers-sndex = 'X'.
lwa_receivers-sndpri = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
lwa_receivers-recextnam = text-t30.
lwa_receivers-recesc = lc_net.
lwa_receivers-sndart = lc_mail.
lwa_receivers-sndex = 'X'.
lwa_receivers-sndpri = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
Passing values for the attachment file
LOOP AT gt_output INTO gwa_output.
CONCATENATE gf_lf gwa_output-matnr gf_etb gwa_output-idnrk gf_etb
gwa_output-type gf_etb gwa_output-menge gf_etb
gwa_output-meins gf_etb gwa_output-comp gf_etb
INTO lwa_att_cont-line.
APPEND lwa_att_cont TO lt_att_cont.
CLEAR lwa_att_cont.
ENDLOOP.
CHECK lt_att_cont IS NOT INITIAL.
DESCRIBE TABLE lt_att_cont LINES lf_size.
lwa_packing-transf_bin = ' '.
lwa_packing-head_start = 1.
lwa_packing-head_num = 0.
lwa_packing-body_start = 1.
lwa_packing-body_num = lf_size.
lwa_packing-file_ext = lc_xls.
lwa_packing-objlen = lf_size * 255.
lwa_packing-objtp = lc_ext.
lwa_packing-objdes = lc_desc.
lwa_packing-objnam = lc_obj.
APPEND lwa_packing TO lt_packing.
CLEAR lwa_packing.
CHECK gf_error IS NOT INITIAL. "Check if unix file is written
FM to send email to the intended recipients
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = lwa_hd_change
object_type = lc_raw
IMPORTING
sent_to_all = lf_sent
TABLES
objcont = lt_objcont
receivers = lt_receivers
packing_list = lt_packing
att_cont = lt_att_cont
EXCEPTIONS
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
originator_not_exist = 20
x_error = 21
OTHERS = 22.
IF sy-subrc = 0.
MESSAGE s004 WITH text-t34.
ENDIF.
COMMIT WORK.
Reward if helpful.
Regards,
Ramya -
I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
-
Why can't I run the new upgrade? All I get is that I am not connected to the internet, even though I am connected???
If you haven't, try updating through iTunes while connected to your syncing PC.
-
All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods. -
I am super frustrated with Safari in ios 7. I do not have the pages icon on the bottom right of Safari ios 7. When I press the plus sign at the top right I see 'private' on the bottom left side but there are no buttons on the bottom right at all. I am trying to get Safari to have the tab Rolodex look of the tabbed windows. So I can see the pages. Hope this is making sense. Why am I not seeing the pages button on the bottom right of Safari?
Thanks!Bummer! Hopefully this will change in the future. At least I know now that I am not crazy for not seeing the pages icon! Thanks so much :)
-
My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my iPhone back onto my HD.
The songs I'm not able to import casme from CD's. Nothing from napster etc.
I've tried and tried to import them rom iTunes vis "Library" " Import"Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
PLEASE help!! I use Outlook for my email and the Mail App Icon that is in my dock, that I know nothing about, was also storing all my emails. So, I tried to delete ONLY the emails in the Mail App but somehow (under Preferences maybe?) I also deleted ALL my OUTLOOK emails in my inbox. Can someone please please tell me if there is a way to get my Outlook inbox emails back OR EVEN the emails that were in my Mail app - because even tho I never use the Mail app, at least the emails would be there.
When I was trying to delete the emails in my inbox for the Mail app - I followed THESE directions. It did in fact clear my inbox for the Mail app. But then I went to log on to my Outlook account and EVERY SINGLE EMAIL was gone. And not in the Deleted box. Just gone. Here are the directions I followed that screwed everything up. Please help.
Top menu bar, Mail > Preferences > Accounts > Mailbox Behaviors.
Uncheck "Store deleted messages on the server".
At the drop list for "Permanently erase deleted messages when", choose "Quitting Mail".
Next...
Top menu bar, Mail > Preferences > General.
At "When searching all mailboxes, include results from", uncheck "Trash".
Select All = command Ai found out my prob!
here is what you do.
go to the "system preferences" on your dock.
click "software updates".
click "installed software"
if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
go to mail.
click "mail" at the top.
click "preferences...".
find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
hit the "+" (right next to the "-") and add your accout back!
its something with that update that effected mail, i hope this works out for you, if not reply back -
My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.
Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. -
I have a 2010 Macbook Pro and am a very new user to Mac community only started to use this PC a few weeks ago.
My Mac is just hanging and I am unable to shut it down or do anything at all. I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. TxIn order to resolve the issue if it occurs again, more info would be helpful as to what occurred prior to the "hang." One potential fix would be to try a Safe Boot:
After the Mac is completely shut down, push the power button and immediately after the startup tone, hold down the Shift key. The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
There should be a message that says "SafeBoot." After the Mac is completely booted, try restarting and see if the issue is gone. -
I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.
You may want to try restarting to see if that has any effect Turn your iOS device off and on (restart) and reset
-
I am having a problem importing my images into Aperture 3 from my Nikon D800E. The images appear as if red paint was splashed across the sky. The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software. Aperature does not even like the jpg images usable by Photoshop. I am suspecting that Aperture is not correctly using the camera raw file. Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions. Aperture worked just fine for me in June with the same camera. All drivers and software are current as of this posting. Anyone else out there seen this before??
Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
Aperature does not even like the jpg images usable by Photoshop
If the JPG's have the same problem then it isn't this bug.
regards -
When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?
paul71054 wrote:
... Any ideas?
add a few seconds black to your project.
Try again.
could be some really weird codec problem, with 'cut' GOPs', .. somethin'... -
i purchased an album and all of it downloaded except for one song. after a few auto attempts an error message comes up saying the file is corrupted. how do i get the song i paid for?
oh the error msg error= -100000I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did. But some reason the app Clash Of Clans did not. Thank you.
If I wiped my phone I wouldn't have the contacts on my phone to send to my self. I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing
Maybe you are looking for
-
I have a MBP early 2011 13 inch and do not have Apple Care. After I installed Mountain Lion I noticed the battery health was dropping pretty rapidly, with a service battery warning. I tried resetting the SMC and PRAM and even a clean install. I to
-
Hi, after a massive update now cant login to X, the logs, here (EE) HID 1267:0103: failed to initialize for relative axes. (**) HID 1267:0103: (accel) keeping acceleration scheme 1 (**) HID 1267:0103: (accel) acceleration profile 0 (II) HID 1267:0103
-
Synch with itunes after reformat.
Hey guys, I've reformatted my Windows XP Pro recently and trying to put more mp3s in my iphone 3g, but it just wont allow me.... all the songs are in my computer (other partitions), and i wont have to worry about the applications since once i've down
-
DOWN Traversal out of JTextArea using SHIFT+ENTER key combination.
Hi folks I slightly modified the focus-traversal code presented in Java Tutorial (http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html) to replace the CTRL+TAB combination with SHIFT-ENTER (because it is easier to type) but the code does n
-
Saving my iPhoto to a external HD
Hello! I have a MacBok Pro and use iPhoto 08, my problem is my iPhoto Lib is reaching 92GB! So I want to store my photos on a portable HD. Is there an easy way to do it? I understand that I will have to take the portable HD with me every where I go i