Why is the Boot Disc Selection screen always appearing?

WIth a bootcamp partition on an iMac booting while holding down the Option key will cause the boot disk selection screen to appear, but suddenly I'm getting the boot disk selection screen even WITHOUT holding down the Option key. Why?

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

Similar Messages

I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

Hey folks,
I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
I searched all morning and didn't find anything, was hoping that someone might have an idea.
Thanks in advance

Search again. Microsoft has tips on what to do and Windows has a number of features
system restore points
automatic system repair using the Win7 DVD
system restore image creation
Just like you would with OS X Lion and Lion Recovery and Repair
Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
rollback to last known good boot check point
rollback a driver or program or any changes
clean out temp files
clean registry
chkdsk
https://discussions.apple.com/people/The%20hatter?view=bookmarks

My MBP runs hot in the boot volume selection menu

I noticed that when I start my MBP holding shift to get to the boot volume selection menu and leave it there for 15 minutes or so (might be shorter, I was gone both times that it's happened so far) the MBP gets unusually hot (almost too hot to touch between keyboard and screen) and I can hear the fans going much faster and louder than they should be (I think). After choosing one of the boot volumes and checking the temperatures in iStat Pro I see that the CPU is at just under 70°C. A few minutes later the temperatures go down by about 10°C and the fans quiet down running at the usual 2000rpm.
Why does it get so hot? How can a simple boot menu be consuming more resources than a full desktop environment plus open Dashboard (which FYI contains 20+ widgets).

Answer: yes, it does.

Why is the boot time on my mac pro 2010 slower than my 2010 core 2 duo 13 mbp?

Why is the boot time on my mac pro with clean install of lion around 34 sec on my mac pro 2010 2.8 quad core, when it is only around 17 sec on my 13 mbp 2.67 core 2 duo?
The mac pro uses around 13 seconds from i hit the power button til i hear the chime and see the grey screen.
Is it because it uses time to find the wireless keyboard, trackpad and cinema display?
Mac pro has 16 gb ram and 240 gb ocz agility 3 ssd, macbook pro has a intel 120 gb ssd (320 i think) and 8 gb of ram, so the mac pro has more umpf....

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

KDMAT need to be included in the current VA01 selection screen or list when

Hello SAP SD Consultants,
Please help me with below requirement or what user exit should we use to implement below requirement. I have discussed with with ABAP and gave some User exits that has related description, however, ABAP confirmed that none of below UE suits the requirement.
1. AD010002 - Delimit selection and/or filter data that is determined
2. CLCLRS01 - Additional Fields on the Result Screen
3. CLCLRS02 - Fill the Additional Fields on the Result Screen
4. V60P0001 - Data provision for additional fields for display in lists
5. WVLB0001 - Display additional data in subscreen for simulation list
Thus, kindly help us on how we can proceed with this.
000----
Requirement:
The field u201CCustomer-material numberu201D or field name KDMAT need to be included in the current VA01 selection screen or list when creating sales orders with reference from a contract.
Currently, customer have its own description or material code to classify or define the product they want to order which are sometimes not exactly the same as the material number maintained in the system or the product / material code used by the Company for sales. These material descriptions were manually entered in the system thru the use of customer-material number field or KDMAT. When sales orders or contracts are created for certain or specific customers, the user or the person who creates that contract / order manually inputs the description in the customer-material number field.
The said entry should also be seen in the Selection List for Reference Document. The transaction to be modified is VA01 under program screen SAPMV45A specific to screen number 4413.
Test Data used:
Reference Transaction: VA41 (create contract), VA43 (display contract)
Order Type: ZCQ (example)
Contract No. 40000040
Transaction: VA01
Order type: ZOR (example)
Contract No. 40000040
a. Go to tcode VA01, input the order type ZOR, click the button CREATE with REFERENCE.
b. Input the reference contract document, since our reference doc is a contract, go to tab CONTRACT and input the contract no..
Expected output:
Upon inputing the contract no. in the contract tab, click u201CSelection Listu201D.
The customer-material number or KDMAT should be included as one of the field and should be displayed in the Selection List for Reference Document window.
Edited by: ria sumagaysay on Mar 26, 2010 11:30 AM

Hello,
Thank you for the responce.
The reason why they want to reflect KDMAT in the selection list is that, during order creation, not all materials or KDMAT will be ordered by that customer, only specific materials. However, during order processing, the customer only gives the details of the KDMAT. Thus, if there are around hundreds of items inside that contract, the sales personnel who creates the order needs to exclude those material not included in the customer order list manually via checking table VBAP and compare the material code from the selection list.
This is very tedious on their part and commonly caused human error, however, when the KDMAT field is available, although the process has manual intervention, it will serve them well and lessen the burden.

How do I transfer my boot disc data to a new disc and have the new disc become the boot disc?

My original 500 Gb boot drive is full (~800 Mb available). I purchased a 1 Tb drive and installed it (no problems). Now I want to transfer everything on my original boot disc to the new drive and have the new drive become the boot disc. I would then wipe the original disc and use it for data backup.
Can I simply copy all the contents of the original disc to the new disc (this seems too easy...)? I am in that process, now, but am feeling insecure about it. I do have Time Capsule. However, when I went into it to restore to the new disc it wouldn't perform the task - maybe I am overlooking something...
Suggestions are welcome!
Thanks
Jim

No, the system won't 'copy' but you can clone it.
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.bombich.com/software/ccc.html
You could also copy or clone /Users to the new drive and leave the system where it is and free up most of the file space being used. OS X only needs 100GB. That way all the data is on the new drive.
And I think you want to add CCC along with TimeMachine to your backup strategy.
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine/

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

Infoset Query- How do I clear the in-built selection screen in LDB

Dear Experts,
When LDB is used in queries unwanted selection screen blocks appear.
Please help in getting rid of the same.
Kind Regards
Jogeswara Rao

Hello Jogeswara,
1. In the Infoset push button Extras and then select Code tab.
2. Select AT SELECTION-SCREEN OUTPUT for Code Section.
Suppose your query is based on logical database KDF and you went to hide the SELECT-OPTIONS for Company Code.
loop at screen.
if SCREEN-NAME = '%_KD_BUKRS_%_APP_%-TEXT' OR
     SCREEN-NAME = '%_KD_BUKRS_%_APP_%-OPTI_PUSH' OR
     SCREEN-NAME = '%_KD_BUKRS_%_APP_%-TO_TEXT' OR
     SCREEN-NAME = '%_KD_BUKRS_%_APP_%-VALU_PUSH' OR
     SCREEN-NAME = 'KD_BUKRS-LOW' OR
     SCREEN-NAME = 'KD_BUKRS-HIGH'.
    screen-invisible = '1'.
    screen-active = '0'.
    modify screen.
endif.
endloop.
Kind Regards,
Rae Ellen Woytowiez

Why is the itunes store selection different on my mac and apple tv?

Why is the itunes store selection different on my mac and apple tv. when i browse the documenteries on my apple tv, i can purchase/rent only 3. when i look on the itunes store on my mac, there's a whole page of docs to select from.

"ah, so It's really up to the artists/ Distributions people that decide what can be published or sold? "
Yes.

Regarding the event AT SELECTION-SCREEN ON FIELD ..

Hi experts,
Can u plz tell the real advantage of the event AT SELECTION-SCREEN ON FIELD than
AT SELECTION-SCREEN ..
in which type of situations AT SELECTION-SCREEN ON FIELD is needed??
Thanks & Regards,
sathish.

Hi,
when we are going to do two are more field validations at a time
we can use AT SELECTION-SCREEN ON <fieldname>.
if it is there single field we can use AT SELECTION-SCREEN.
have a look.
select-options: s_vbeln like vbak-vbeln,
                      s_vkorg like vbak-vkorg,
                      s_vtweg like vbak-vtweg,
                      s_matnr like vbap-matnr.
AT SELECTION-SCREEN ON s_vbeln.
select----
if sy-subrc <> 0.
error message.
endif.
AT SELECTION-SCREEN ON s_vkorg.
select----
if sy-subrc <> 0.
error message.
endif.
AT SELECTION-SCREEN ON s_vtweg.
select----
if sy-subrc <> 0.
error message.
endif.
AT SELECTION-SCREEN ON s_matnr.
select----
if sy-subrc <> 0.
error message.
endif.
Regards.
sriram.

Adding the field in selection screen

Hi Guru's,
how can i add the field in selection screen of t code qa33.
can any one help me pls.
Thanks & Best Regards,
Rakhi.

You can enhance the standard program RQEEAL10 using implicit enhancement points.
Click the spiral (Enhance) button (Shift + F4)
Go to Edit -> Enhancement operations -> Show Implicit Enhancement Poitns
Create an Enhancement Implementation and include your code there.
See the following link -> Source Code Enhancements - Part 5 of the Series on the New Enhancement Framework
Hope it helps
Neeraj

What r the list of selection screen events

What r the list of selection screen events

hi,
chk out the following links...
http://help.sap.com/saphelp_nw04/helpdata/en/56/1eb6c705ad11d2952f0000e8353423/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9a2e35c111d1829f0000e829fbfe/content.htm
http://www.sap-img.com/abap/different-types-of-selection-screens.htm
Regards,
Viji

The Cluster Node Selection screen doesn't appear installing RAC 9i

The Cluster Node Selection screen doesn't appear installing RAC 9i with OCFS on Windows 2003
We are using patch #2878462 OUI 2.2.0.18.0
The Oracle Cluster check was successful !

more info ...
We are following the doc. id. #178882.1 "Step-By-Step Installationg of RAC with OCFS on Windows 2000" instructions.

Why are the terms for adobe flash player appear to be written in arabic?

Why are the terms for adobe flash player appear to be written in arabic?

It opens on the English page for me:
Some of your systems settings may be incorrect, so it opens on the first (Arabic) page. But you can always click on the English bookmark to go to the English section.

Why is the Planned quantity in MCP9 not appearing(Repetitive Manufacturing)

Sub:WHY IS THE PLANNED QUANTITY IN MCP9 NOT APPEARING(REPITITIVE MANUFACTURING
Why are the planned orders not displayed anymore. They are still in the system - in MD04 - but since we moved from release 3.1i to 4.0 the plan order qty disappeared from transaction MCP9!!!!.Now we are using Version 4.7
There must be a reason
Perhaps searching in SAP OSS system -if the transaction is not supported in rel 4.0 anymore and we should use something else instead
Or we need to apply an OSS note from SAP to repair the problem...
Or the info system update must be modified because of rel change... I don't know.
Please suggest your valuable guidance,Iam not able to enclose a screenshot of the problem,planned qty is 0 or it is not getting displayed.If you reply to this query i can send a detailed analysis to that mail id .

Dear Guruji Mr.Rajesha vittal,
Sir ,iam stuck with this problem,not able to proceed.
Can i send the activites i have completed till now ,I want your e mial id sir for me to send the attachments to you.
Also i dont know how to award points i need to award points to u for all the solutions i have recieved till now ,can you please explain to me
I am stuck with this MCP9 problem i have done it according to your suggestion,but still the planned quantities are not displayed. can you please help me out.Very urgent. I need u mail id
Thanks & Awaiting your reply
P.S.KIRAN
[email protected]
[email protected]

Why is the Boot Disc Selection screen always appearing?

Similar Messages

Maybe you are looking for