Why is the box set to the same channel everytime I turn it on?

i thought there was a setting that would allow you to have the channel that you were on last prior to powering off be the channel upon powering back on.  my box is ALWAYS on ESPN upon power on, even if that's not the channel I was on when turning it off.

grotzpa,
Try removing the power cable for a couple minutes and then plug it back in, power up and see if that clears the issue.
Regards,
Chris
Christian
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

  • Why does the same RGB color appear lighter in one ai file and darker in another?

    Why does the same RGB color appear lighter in one ai file and darker in another??  I want to use the more vibrant color, but when I try to reproduce the same RGB color code in another Adobe Illustrator (ai) file, it shows up darker.  I printed the two files out, and you can see the difference in the print too.  I exported the color orginally as an eps file from an ArcGIS map.
    Any insight is greatly appreciated!
    Anne

    You illustrator files may have different color profiles attached.
    Set to show your color profile in the bottom left of each document by using the flyout menu >> show >> document color profile
    Then you can use edit >> assign profile to get them the same
    Yours are quite far off for RGB (which are usually close to each other for many profile due to wide gamut).  I question as Jacob did if one of your documents are in CMYK mode. Look in parenthesis after the document name at top of window.
    Check if view > proof setup is the same (do not use the uncoated profile as in my screenshot, that was only there cause of my testing)
    Make sure view >> proofs colors is checked or unchecked for both.
    To get them to print the same, check these settings are the same
    Sorry for all the screenshots, but hopefully one day we will see Adobe's complex color management united all in one window.

  • Why is the same photo repeated when I import photos from I-Photo to I-Movie?

    Why is the same photo repeated when I import photos from I-Photo into I-Movie (2011)?

    Select them in iPhoto and export (file menu ==> export) and use one of the options to set the file name of exproted photos
    LN

  • Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doe

    Hello. The Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doesn't auto play either. Thanks!

    Hi Mariana,
    Please make sure you have the autoplay checkbox selected from the fly-out options:
    Regards,
    Akshay

  • Why, with the same number of photos in both places, do I still have 25 GB of storage on my iPad and have to BUY more space in iCloud?

    Why, with the same number of photos on my iPad and supposedly in iCloud, do I still have over 25 GB of space on my iPad but now need to buy even more storage space in iCloud? My iPad is 64 GB and I am now paying for 20 GB of iCloud storage with 864 MB left!

    As I said: 
    Even if the Photos are less than 20GB,  There's other stuff on the iPhone that is likely getting backed up to iCloud and using space. Basically your Phone has more space to spare than iCloud.
    You can check in Settings->iCloud->Storage->Manage Storage to see what is using up the space in iCloud.
    Anyway, turning off Photo stream will remove all photos from iCloud, it will not remove them from the iPad if they were taken with it, or copied to it.
    Again I suggest you check in:Settings->iCloud->Storage->Manage Storage to see what else is using your iCloud space.

  • Why does the same photo appear in every iphoto album?

    Why does the same photo appear in every album? Clicking on it makes other pictures appear?

    Backup your iPhoto library, depress and hold the option an command keys, launch iPhoto and from the resulting first aid window rebuild your thumbnails. This may take several trys
    If it does not fix the issue then repeat and rebuild your database
    LN

  • I have two iphones  ...why shows the same pictures

    i have two iphones  ...why shows the same pictures

    Are you referring to the Camera Roll, or the Photostream, what?

  • Why is the same wirelles connection too slow for an iphone4 when it is quite fast to an iphone5?

    Why is the same wirelles connection too slow for an iphone4 when it is quite fast to an iphone5?

    You really have a question for iPhone support here, so I suggest that you post in the appropriate support area:
    Using iPhone
    The experts over there will likely suggest that you use the Apple Troubleshooting Guide for iOS devices, so you might want to work your way through that before you post in the iPhone support area.
    http://support.apple.com/kb/TS1398

  • Why does the setting of trackpad always changes everytime i turn off my Macbook pro?

    why does the setting of trackpad always changes everytime i turn off my Macbook Pro?

    Sure ,  just refer to:
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT3964

  • Why do the same permissions have to be corrected more than once

    Each time I check permissions, it seems as if the same errors need to be fixed. Why do the same errors keep on repeating themselves?

    Michael,
    I hope that is all that is, and I suspect you are right. A bug would cause the same errors to pop up each time. I get errors such as user differs, should be 0, user is 95., etc., which is accord with what you suggest. Almost all of the errors I get are Java VM Framework related, and I am aware of how problematic that could be.
    In any case, thank you for your insight.
    Sara

  • Why can't I buy any app ? Iv tried creating a new Appel account ect but it says the same thing everytime . Sorry your payment was declined . How can I sort this ? Please help

    Why can't I buy any app ? Iv tried creating a new Appel account ect but it says the same thing everytime . Sorry your payment was declined . How can I sort this ? Please help

    - Try another payment method.
    - Contact iTunes
    Apple - Support - iTunes - Contact Us
    - Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

  • Why does the same song apear as $0.99 and $1.29?

    Why does the same song appear more than once and costs either $0.99 or $1.29?

    Sometimes the exact same song will have two different prices when it appears on two different albums.
    For one of many examples, "Concrete Angel" is 99 cents when it's on "Greatest Hits":
    http://itunes.apple.com/us/album/greatest-hits/id256344266
    But it is $1.29 when it is on the album "Hits and More":
    http://itunes.apple.com/us/album/hits-and-more/id492676107
    The reason is not obvious, but feel free to buy the cheaper one.

  • [svn] 4258: Bug: LCDS-522 - Add more configurable reconnect handling for connecting up again over the same channel when there is a connection failure /outage.

    Revision: 4258
    Author: [email protected]
    Date: 2008-12-08 16:33:17 -0800 (Mon, 08 Dec 2008)
    Log Message:
    Bug: LCDS-522 - Add more configurable reconnect handling for connecting up again over the same channel when there is a connection failure/outage.
    QA: Yes
    Doc: No
    Checkintests Passes: Yes
    Details:
    * Updates to configuration handling code and MXMLC code-gen to support new long-duration reliable reconnect setting.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-522
    Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/ClientConfiguration.java
    blazeds/trunk/modules/common/src/flex/messaging/config/ClientConfigurationParser.java
    blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
    blazeds/trunk/modules/common/src/flex/messaging/config/ServicesDependencies.java
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    Added Paths:
    blazeds/trunk/modules/common/src/flex/messaging/config/FlexClientSettings.java
    Removed Paths:
    blazeds/trunk/modules/core/src/flex/messaging/config/FlexClientSettings.java

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • When extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

    when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

    Have you even tried the process in which i have described in my previous post?
    Yes, many times.  If you are setup to "extend a wireless network, the screen looks like this:
    If you click the Wireless Options button, the screen looks like this:
    Where is it on this screen that you see a setting to adjust the channel?  It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
    Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different.  You have no control over this, so you have to accept what AirPort Utility thinks is best.

  • How do I assign midi controls to 2 separate plug ins in the same channel strip?

    Hi
    I want to set up my Oxygen 2 to control my eq and compressor in the same channel but when I set the 8 knobs to the EQ parameters and then try to do the same to the compressor, I either have to delete the eq controls or have them both assigned to the same knob, which is obviously not what I want to do as changing one knob effects the other plugin. I thought whatever plugin I click would be the one that gets the midi focus, but clearly not, any ideas?
    Thanks
    Christian.
    PS Logic 9 by the way.

    Put the effects on two separate auxes and send the sound to both. Install both auxes in the arrangement and assign your knobs for each one. Then you can select each aux track when you want to control its effect. Or use 4 knobs for each.

Maybe you are looking for

  • Is there a way to restore an erased history?

    My kids have recently started erasing the history on my computer.  I want to go back and see what they are looking at.  Is there any way to restore a history once it has been cleared?  Thanks

  • OLE2. How to set cell format to percentage

    hi, how can I set the cell format to percentage? I tried with ole2.set_property (cell, 'NumberFormat', '%'); OLE2.set_property(cell, 'Formula', '=A1/B1'); but this only print a '%' at the end of the cell. Really, the cell format is not percentage, an

  • When clicking the new button

    I would like to know how I can get the value you had fields before clicking the new button and place it back on the field. The idea is that the field is not empty , but have the previous value. (excuse my English is not my primary language)

  • How to edit o/p fields in hierarchical list?

    how to make output fields as input enabled, displayed in the hierarchical list? i.e. to make them as editable?Is it possible in list display?

  • Workflow status and logon in single report

    Hi, Is there any standard report which can show me workitem status and user last logon in sap? can anyone suggest me how do i get these two in single report. Thanks