Why is the cadence of my film like video lost on DVD shown on TV

I'm pretty happy with a music video I have edited and graded in FCP and Color. It has a good film like cadence when I play it back on my iPhone or computers.
When I burn it to DVD via Compressor (using a standard MPEG-2 preset) it again looks good when I put the DVD back into my computer and play it with Apples DVD Player application. However, when I play the DVD back via my Sony DVD/Bluray player connected to my HD Sony TV, the video looks too smooth and doesn't have that subliminal flicker and cadence of film. It has lost that something that make film seem more remote and romantic. Rented Movie DVDs look fine through the DVD player/TV system.
Is there something I should have done or could do to remedy this?
Thanks for any suggestions
(Original footage 25 fps 1080p, edited into FCP timeline sequence 25 fps, 1080p, ProRes 422 LT)

Your playback devices (DVD player & HDTV) are working together to display the material. You need to delve into their settings. Your TV may not be able to play 1080p or the player is not capable of sending 1080p.
Your computer and ipod are progressive displays and the TV is most likely interlaced as well as progressive.
x

Similar Messages

  • Why is the ``A`` starting to look like the Masonic Temple logo?

    Why
    is
    the
    ``A``
    starting
    to
    look
    like
    the
    Masonic
    Temple
    logo?

    Why are you posting in the Classic forum, when no Classic operating system runs on iPhones or can sync with them?  Is this a problem on your iPhone?
    Or are you talking on a computer?    Is this a phone that you have added some strange App on?
    To post in the proper forum, read this tip:
    https://discussions.apple.com/docs/DOC-2463
    And please don't use one word a line.  It makes your post really hard to read.

  • When I try to turn on my ipod touch I get a picture of a cracked apple and then a picture of a cable arrowed to the iTunes logo.  I cannot do anything else.  My computer now doesn't recognize the ipod and it looks like I lost all music and pictures. help!

    when I try to turn on my ipod touch I get a picture of a cracked apple and then a picture of a cable arrowed to the iTunes logo.  I cannot do anything else.  My computer now doesn't recognize the ipod and it looks like I lost all music and pictures. help!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Why is the screen quality of ios7 like an android I dislike it

    I very much dislike ios7 some features are nice like the multitasking.

    I'm not sure anyone here really cares about your opinion as we're all users.  However, if you'd like to provide feedback to Apple, it goes here:
    http://www.apple.com/feedback/iphone.html

  • Why does the PhotoSmart C8180 light up like a Christmas tree with flashing lights? HP - need help!

    Why - HP we need an answer.

    Hi Flyers1974,
    Are you getting an error message or code on the printer ?
    What operating system are you using ?
    Does it always do this or just a certain times ?
    You may first want to try and reset the printer if you haven't already.
    Here is the link to do a reset.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Why does the empty path constant look like an anchor?

    Okay, it's a silly question... but a friend asked and I really have no idea.
    Anyone?

    A (wild) guess...
    ... someone at NI handling this part of LabVIEW development , wanted the closest representation of ":\" (as c:\ in dos/windows root path), but wanted dots to be highlighted as well

  • Why is the length of my FCP imported video shorter than the original QuickTime version?

    When I open my .mov file in QuickTime, it is 15:33. However, when I import it into FinalCut, it is only 14:09. Is this a frame rate issue? How do I fix it? Thanks for any help...sorry if this is a silly question.

    What is the format of this Quicktime file? FCP doesn't just work with any old QT file. It must be in an FCP editing codec, like ProRes or DV/NTSC. Dropping in H.264 or other highly compressed codec can lead to all sorts of issues.  If it isn't ProRes, convert to ProRes first.

  • Why is the iPad 2 not recognizing my video from my camera?

    have an iPad 2, camera connection kit, Canon T3i. I am trying to transfer video to the iPad 2 via the connection kit and an SDHC from SanDisk, why does it not play? It xfer's the pictures and they show up but all the video file says is MOV in grey?

    Hi Chombeh,
    If you are having an issue with the response of your touchscreen on your iPad, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Why does the menus show over my airplay video?

    After the last atv update (i think) Something weird happens when i try to stream video (from my iphone or beamer) to my tv. The video plays, but the ATV menus is showing on top of it. It does not happen when i mirror my mac with airplay mirroring.
    Anyone who knows anything about this?
    /R

    Does it show like that in iTunes as well?
    If so there may be a space at the end of one of the names.
    If it is you can fix it by selecting all tracks and doing a multiple edit to make the artist name the same across all of them.
    Let me know if that fixes it.
    Regards,
    Colin R.

  • Why is the quality of my mpeg-4 video degrading when I publish them through IMovie?

    The vids are in mpeg-4 format to start off with.  I import them into IM and add some introduction screens and crossfades then Share/YouTube. Should I follow some other methodology to maintain quality?

    This is the iPhoto forum - I will request that your quesion be moved to the iMovie forum where Movie experts hang out
    LN

  • Why is the sound quality on iPhone 5s videos so poor compared to iPhone4?

    I used to take lots of videos with my iPhone 4 at nightclubs and or music shows and the sound quality was always very good.
    Now I have just bought an iPhone 5s and the last thing I expected was that the sound on videos would be clipped and distorted badly.  Does anyone have any suggestions, or is it simply that the new phone is rubbish compared to the old one (I really hope not)?

    It could have to do with the noise-cancelling microphone on the device. If you are in a loud area such as the shows, it is trying to single out a sound, normally closest to the phone. I'm not exactly sure if this is the case when recording video. I just know you can turn it off in Accessibility, but that mentions phone calls. Worth a test though.

  • Why does the connection to a local database get lost when the network is disconnected?

    I am using TestStand 3.1. I have a database setup on the local drive and I am using the "Log on the Fly" option.
    The test takes 48 hours and I want to make sure that it will not stop if the network connection is lost.
    If I unplug the network before starting the test, everything is fine. I can plug the network in and out again while the test runs with no issue.
    But if the network is connected and I start the test, and then unplug the network the logging on the fly will give an error. 
    I have narrowed this down to the step "New UUT for Database Logging" in the SequentialModel.seq (process model). If this step is run with the network connection then the rest of the test needs a network connection.
    Is there any way to avoid this error?  The whole point of the local database was to avoid network issues.
    Thank you for your help.
    Solved!
    Go to Solution.

    Hi Scott,
    The Error Code is:
    -2147467259; User-defined error code.
    Possible System Error: Unspecified error 
    The Error Message is: 
    An error occurred calling 'LogUUTResult' in 'ITSDBLog' of 'TestStand Database Logging'
    An error occurred executing a statement.
    Statement: UutResult.
    Connection failure
    Description: Connection failure
    Number: -2147467259
    NativeError: 0
    SQLState: 08S01
    Reported by: Microsoft OLE DB Provider for SQL Server
    Description: Unspecified error
    Number: -2147467259
    NativeError: 0
    SQLState: 08S01
    Reported by: Microsoft OLE DB Provider for SQL Server
    Source: TSDBLog
    The Location is:
    Step 'LogResult' of sequence 'ProcessModelPostResultListEntry' in 'SequentialModel.seq'

  • Why does the volume spike when playing youtube videos? Even after i turned it down right before hand

    Okay so this is becoming highly annoying and extremely worrisome since I value my ears more than any other sense.  I keep having this issue where i plug headphones in, turn the volume down to half way or lower, put headphones on, then go to start a youtube video to listen to a song, and then as soon as the video starts BOOM the volume goes up to full blast.  on several occasions now i am worried i have been close to hurting my ears, I am really starting to loose my mind over this.  WHAT IS GOING ON? I try to remember to keep the headphones out of my ears before playing the video, but there are too many times where i forget, or had switched to sommething else and then go back just to be blasted by volume.  Jesus Christ apple you are going to wreck peoples ears. 
    I have the ipad air.  I have whatever the latest software is

    Hello rwright8
    If you are concerned about the volume going to high when watching and listening to videos, you can change the volume limit to not go that high. Go to Settings > Music > Volume Limit and set it to the desirable volume. If you are using the YouTube app from the App Store, try out the troubleshooting steps in the second article to troubleshoot the issue further. 
    Volume Limit
    http://help.apple.com/ipad/7/#/iPad99f37037
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    Regards,
    -Norm G.

  • Why did the videos get taken from festival?

    Why did the videos get taken from festival?

    Ten days and still no reply. Thanks, Apple. It's companies like you and EA that make me think you guys are only in it for the money. I payed $2.99 for this dn app and no refund. But it doesn't matter anymore because I jailbroke my iPod and got the app back. Looks like you lost a customer.

  • Why can't we see the details of a picture or video taken with our iphone or Ipad? Detail like when it was taken the picture or when the movie was filmed. I think that this very very important for our memories.

    Why can't we see the details of a picture or video taken with our iphone or Ipad? Detail like when it was taken the picture or when the movie was filmed. I think that this very very important for our memories.

    Yes, I know that, but it was easier to see it on the Iphone self, like the other company phones. The name of the picture taken should be the date when it was taken.

Maybe you are looking for